- type examination performed by:
TÜV Austria Services GmbH, Notified Body
1230 Vienna, Deutschstrasse 10, Austria
Affixing date of CE mark:
2003
CHSZ-…_171117
Senior Vice President Director Quality
General Manager & Systems
Declaration of Conformity
We, EATON Industries (Austria) GmbH
3943 Schrems, Eugenia 1
Austria
declare under our sole responsibility that the product (family)
Eaton - Remote Control,
CHSZ-…
(the declaration of conformity applies to all
listed types within our actual product catalogue)
provided that it is installed, maintained and used in the
application intended for, with respect to the relevant manufacturers
instructions, installation standards and “good engineering practices”
complies with the provisions of Council directive(s):
RED Directive 2014/53/EU
RoHS Directive 2011/65/EU
based on compliance with following standard(s):
EN 301489-3 V2.1.1, EN 300220-2 V3.1.1, EN 55022:2010, EN
55024:2010, EN 60950-1:2006 + A11:2009 + A1:2010 + A12:2011 +
A2:2013, EN 50491-5-1:2010, EN 50491-5-2:2010, EN 62479:2010,
EN 50581:2012
17.11.2017
