Eazyzap CL160-A User manual

Fly Killer
Instruction manual
Model :
CL160-A

1
Safety Tips
• A service agent/qualified technician should carry out installation and any repairs if required. Do not
remove any components or service panels on this product.
•ConsultLocalandNational Standards to comply with the following:
• Health and Safety at Work Legislation
• BS EN Codes of Practice
• Fire Precautions
• IEE Wiring Regulations
• Building Regulations
• Always switch off and disconnect the power supply to the appliance before cleaning.
• Install the appliance out of the reach of children.
• Never insert hands or other objects into the appliance while it is connected to the power supply.
• Install the Fly Killer at least 1 metre away from food preparation areas.
• Never use near flammable objects.
• Keep all packaging away from children.
• If the power cord is damaged, it must be replaced by an EAZYZAP agent or a recommended qualified
technician in order to avoid a hazard.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory
or mental capabilities, or lack of experience or knowledge, unless they have been given supervision or
instruction concerning the use of the appliance by a person responsible for their safety.
• Children should be supervised to ensure that they do not play with the appliance.
Product Description
CL160-A - Outdoor Lantern Pest Killer
Introduction
Please take a few moments to carefully read through this manual. Correct maintenance and operation of
this machine will provide the best possible performance from your EAZYZAP product.
Pack Contents
The following is included:
• Pest Killer
• Instruction manual
EAZYZAP prides itself on quality and service, ensuring that at the time of packaging the contents are
supplied fully functional and free of damage.
Should you find any damage as a result of transit, please contact your EAZYZAP dealer immediately.

2
Telephone Helpline: 1300 225 960
Installation
1. Remove all packaging and protective film from the Fly Killer.
2. For best results, locate the Fly Killer in the darkest area, but at least 1 metre away from food
preparation areas.
3. Connect the appliance to mains power.
Operation
The fly killer works by luring insects on to an electrified metal grid using ultra-violet light. It uses no
chemicals and is pollution free. To use the Fly Killer:
1. Press the switch to the ON position.
2. The light will come on and the grid will become electrically charged.
Cleaning, Care and Maintenance
• Always switch off the power and disconnect the appliance from the power supply before cleaning.
• DO NOT immerse the appliance in water. Wipe the safety guard and external casing with a damp
cloth.
• Change the bulbs every 9 months.
Changing the Bulb
3. Turn the appliance upside down.
4. Unscrew the screw securing the bottom cover of the Fly Killer.
5. Lift up the cover.
6. Holding the ends of the bulb, unscrew from socket.
7. Slide the bulb up out of its socket [Fig. 4].
8. Replace with a new bulb.
9. Twist the new bulb ‘backwards’ to lock it back in place.
10. Relocate the cover and replace the screw.
Note: Ensure the mounting substrate and the fixings used can support the weight of the
appliance. If in doubt seek professional advice or assistance.
Note: Close proximity to other light sources will reduce the effectiveness of the Fly
Killer.
WARNING: Under no circumstances should hands be placed anywhere near the high
voltage grid when the appliance is operational.
WARNING: Always turn Off the appliance and disconnect from the power supply before
changing the bulb.

3
Troubleshooting
If your appliance develops a fault, please check the following table before making a call to the
Helpline.
Technical Specifications
Fault Probable Cause Action
The unit is not working The unit is not switched on Check the unit is plugged in correctly and
switched on
Plug and lead are damaged Call EAZYZAP agent or qualified technician
Fuse in the plug has blown Replace the plug fuse
Power supply Check power supply
Internal wiring fault Call EAZYZAP agent or qualified technician
Tube has expired Refer to the ‘Changing the Bulb’ section
Tube is faulty or has not been
fitted correctly
Model Voltage Power Current
Dimensions
h x w x d (mm)
Weight
CL160-A 230V 50Hz 43W 0.2A 441 x 305 x 305 3kg

4
Telephone Helpline: 1300 225 960
Electrical Wiring
This appliance is supplied plug and lead.
The plug is to be connected to a suitable mains socket.
This appliance is wired as follows:
• Live wire (coloured brown) to terminal marked L
• Neutral wire (coloured blue) to terminal marked N
• Earth wire (coloured green/yellow) to terminal marked E
This appliance must be earthed, using a dedicated earthing circuit.
If in doubt consult a qualified electrician.
Electrical isolation points must be kept clear of any obstructions. In the event of any emergency
disconnection being required they must be readily accessible.
Compliance
The WEEE logo on this product or its documentation indicates that the product must
not be disposed of as household waste. To help prevent possible harm to human
health and/or the environment, the product must be disposed of in an approved and
environmentally safe recycling process. For further information on how to dispose of
this product correctly, contact the product supplier, or the local authority responsible
for waste disposal in your area.
Apuro parts have undergone strict product testing in order to comply with regulatory
standards and specifications set by international, independent, and federal
authorities.
Apuro products have been approved to carry the following symbol:
:
All rights reserved. No part of these instructions may be produced or transmitted in any form or by any means, electronic,
mechanical, photocopying, recording or otherwise, without the prior written permission of EAZYZAP.
Every effort is made to ensure all details are correct at the time of going to press, however, EAZYZAP reserve the right to
change specifications without notice.

DECLARATION OF CONFORMITY
I, the undersigned, hereby declare that the equipment specified above conforms to the above Legislation and
Standard(s).
Equipment Type Pest Killers
Model CL160-A
Legislation C-Tick
AS/NZ 3820 Essential Safety Requirements for Low
Voltage Electrical Equipment
Standards IEC 60335-2-59:2002 + A1:2006 + A2:2009
IEC 60335-1:2010 (Fifth Edition) incl.corr.1:2010 and
corr.2:2011 +A1:2013 and Australian deviation
AS/NZS CISPR 14.1 :2013
Producer Name Easyzap
Producer Address 15 Badgally Road,
Campbelltown,
NSW 2560
Date 22/09/15
Signature
Full Name Richard Cromwell
Position Commercial Director

CL160-A_V2