Ebyte E180-2G4Z20SX-TB User manual

Chengdu Ebyte Electronic Technology Co., Ltd.
E180-2G4Z20SX-TB User Manual
The copyright and the final interpretation right of the
product belong to Chengdu Yibaite Electronic Technology
Co., Ltd..
No. 1 1Of 4
pages
E180-2G4Z20SX-TB User Manual

Chengdu Ebyte Electronic Technology Co., Ltd.
E180-2G4Z20SX-TB User Manual
The copyright and the final interpretation right of the product belong to Chengdu Ebyte Electronic Technology Co., Ltd.
1. Product introduction
1. Used for testing and developing the Chengdu Ebyte E180-2G4Z20SX wireless module, E180-2G4Z20SX-TB
has been pre welded with E180-2G4Z20SX, see details
Please refer to the module manual for detailed use.
2. Size: 28.5 * 24.6mm.
3. Users can connect to external power and serial ports on their own.
4. Stable work and easy development.
5. Adopting a 2.0mm spacing needle design for easy development and use.
6. Compatible with the XBEE3ZigBee3.0 series backplane..
2. Pin definition
Serial number description:
Pin serial
number
Pin definition
Pin direction
Pin use
1
VDD
Input
Support 1.9-3.8 V power supply, and ≥ 3.3 V can guarantee output
power
2
PB1
Output
Serial output pin, TXD

Chengdu Ebyte Electronic Technology Co., Ltd.
E180-2G4Z20SX-TB User Manual
The copyright and the final interpretation right of the product belong to Chengdu Ebyte Electronic Technology Co., Ltd.
Please refer to E180-2G4Z20SX module manual for specific functions.
3. Technical support
During the development process, please actively contact our technical support, we only support our modules, excluding the basic
usage of MCU.
About us
Technical support: [email protected]
Documents and RF Setting download link: https://www.cdebyte.com
Thank you for using Ebyte products! Please contact us with any questions or suggestions: [email protected]
-------------------------------------------------------------------------------------------------
Phone: [phone]
Web: https://www.cdebyte.com
Address: B5 Mould Park, 199# Xiqu Ave, High-tech District, Sichuan, China
3
PB0
Input
Serial receiving pin, RXD
4
PA1
Input/output
General GPIO port
5
NRT
Input
Reset pin, active low
6
PA0
Input/output
General GPIO port
7
PD3
Input/output
General GPIO port
8
NC
NC
-
9
PD4
Input
Wake-up pin, pull up internally, pull low to wake up dormant terminal
10
GND
Power source ground
Power source ground
11
PC0
Input/output
General GPIO port
12
PC1
Input/output
General GPIO port
13
PA2
Output
Device status indicator pin, high level means that the module is in
wake state, and low level means sleep state.
14
NC
NC
-
15
PC3
Output
Network access indication pin, and the output high level indicates that
the module is not connected to the network; Outputting high level at
2Hz frequency means that the module has been connected to the
network (router); Outputting high level at 1Hz frequency means that
the module has been connected to the network (coordinator); Output
low indicates that the module is in sleep state.
16
PC2
Input/output
General GPIO port
17
NC
NC
-
18
NC
NC
-
19
PC4
Input/output
General GPIO port
20
PC5
Input/output
General GPIO port