Ebyte E103-W06-TB User manual

E103-W06-TB User Manual v1.0 Chengdu Ebyte Electronic Technology Co., Ltd.
Sample Website: cdebyte.taobao.com Offcial Website: www.ebyte.com
Choose us because of professional Wireless application experts such as wireless transparent transmission, WiFi, Bluetooth, Zigbee,
PKE, WIFI serial server, etc.
Page 1 of 5 The copyright and the final interpretation right of the product belong to Chengdu Ebyte Electronic Technology Co., Ltd.
E103-W06-TB User Manual V1.0
1. Introduction
1.1 Features
The E103-W06-TB test board uses a USB interface, which can be used to quickly test the features and
functions of the E103-W06 module.
1.3 Electric Parameter
Num
Parameter
Name
Parameter Value
Remark
1
Support module
E103-W06
WiFi Serial Module
2
Module size
62 * 31 mm
With USB Interface
3
Production Process
Lead-free process,
machine paste
Ensure batch consistency and reliability
4
Power supply interface
USB
-
5
Communication
Interface
TTL
-
6
Operating temperature
-40 ~ +85℃
Industrial grade
7
Working humidity
10% ~ 90%
Relative humidity, non-condensing
8
Storage temperature
-40 ~ +125℃
Industrial grade

E103-W06-TB User Manual v1.0 Chengdu Ebyte Electronic Technology Co., Ltd.
Sample Website: cdebyte.taobao.com Offcial Website: www.ebyte.com
Choose us because of professional Wireless application experts such as wireless transparent transmission,
WiFi, Bluetooth, Zigbee, PKE, WIFI serial server, etc.
Page of 5 The copyright and the final interpretation right of the product belong to Chengdu Ebyte Electronic Technology Co., Ltd.
1
2. Function
2.1 Pin Definition
Pin
NO.
Name
Pin direction
Application
1
+5V
-
+5V external power supply (not powered by USB)
2
S1
-
NC
3
3.3V
-
For module power supply selection, connect the power supply jumper cap to the
left end (ie 3.3V shorted to 3V3) through the power chip; connect the jumper cap
for direct battery power supply to the right end (ie 3.3V shorted to VBAT)
4
W_LINK
TX
WiFi connection indication, connection: output high, LED off. Disconnected: the
output is low and the LED is on.
5
INDICATE
TX
Module abnormal connection indication, abnormal: output is high, LED is off.
Normal: The output is low and the LED is on.
6
S_LINK
TX
Socket connection indication, connection: output high, LED off. Disconnected: the
output is low and the LED is on.
7
VBAT_RESET
-
Reset enable, connect the jumper cap: reset is pulled up to 3.3V through a 100K
resistor.
8
USB Interface
-
Serial input, output and power supply

E103-W06-TB User Manual v1.0 Chengdu Ebyte Electronic Technology Co., Ltd.
Sample Website: cdebyte.taobao.com Offcial Website: www.ebyte.com
Choose us because of professional Wireless application experts such as wireless transparent transmission,
WiFi, Bluetooth, Zigbee, PKE, WIFI serial server, etc.
Page of 5 The copyright and the final interpretation right of the product belong to Chengdu Ebyte Electronic Technology Co., Ltd.
2
9
VBAT
-
Battery-powered input port, power supply 2.3V~3.6V
10
RST
RX
Module reset button
11
SOP2
RX
Program loading mode selection
12
SOP1
RX
Program loading mode selection
13
SOP0
RX
Program loading mode selection
14
TX
TX
Module TX transmission
15
RX
RX
Module RX receiving
16
IPX
RX/TX
External radio frequency interface (external antenna requires jumper resistance)
17
E103-W06
-
E103-W06 module
Note: Please refer to the user manual of E103-W06 for specific function instructions.
2.2 Function Test
Function
Description
Test receiving
and transmitting
current
Connect the ammeter to pin 3, as shown in Figure 3, the current test interface diagram,
the current enters from Iin and exits from Iout.
xian If you want to test the sleep current, connect the meter and send the command:

E103-W06-TB User Manual v1.0 Chengdu Ebyte Electronic Technology Co., Ltd.
Sample Website: cdebyte.taobao.com Offcial Website: www.ebyte.com
Choose us because of professional Wireless application experts such as wireless transparent transmission,
WiFi, Bluetooth, Zigbee, PKE, WIFI serial server, etc.
Page of 5 The copyright and the final interpretation right of the product belong to Chengdu Ebyte Electronic Technology Co., Ltd.
3
AT+SLEEPIN
Data
transmission
test
Basic data transmission refer to Chapter 7 Section 1 of E103-W06_datasheet_EN
Network communication refer to E103-W06_datasheet_CN Section 7 Section 2
Module
parameter
modification
Need to modify the module parameters, please refer to the seventh section of
E103-W06_datasheet_CN
2.3 CP2102N Driver Installation
If it is the first time to use the CP2102n interface conversion module, the PC will prompt to install the
new device driver, which can be searched and downloaded online, or the driver wizard can download
the driver.

E103-W06-TB User Manual v1.0 Chengdu Ebyte Electronic Technology Co., Ltd.
Sample Website: cdebyte.taobao.com Offcial Website: www.ebyte.com
Choose us because of professional Wireless application experts such as wireless transparent transmission,
WiFi, Bluetooth, Zigbee, PKE, WIFI serial server, etc.
Page 5 of 5 The copyright and the final interpretation right of the product belong to Chengdu Ebyte Electronic Technology Co., Ltd.
4
3. Customized cooperation
★If company customers need product customization, please contact our company.
★Ebyte has reached in-depth cooperation with many well-known companies.
4. About us
Technical support: supp[email protected]om
Documents and RF Setting download link:：www.ebyte.com
Thank you for using Ebyte products! Please contact us with any questions or suggestions:
[e-mail]
----------------------------------------------------------------------------------------------------------------------
Official hotline:[phone]
Web: www.ebyte.com
Address: B5 Mould Park, 199# Xiqu Ave, High-tech District, Sichuan, China