Echo Power Pruner PPT-265ES User manual

POWER PRUNERTM
OPERATOR'SMANUAL 1
Power PrunerTM
Operator's Manual
MODEL: PPT-265ES
X770001451
08/12
X7702095001
WARNING
Users of this equipment risk injury to themselves and others if the unit is used im-
properly and/or safety precautions are not followed. ECHO provides an operator’s
manual. It must be read and understood for proper and safe operation. Failure to
do so could result in serious injury.

2
Maintenance.............................................................21
- Skill Levels.......................................................21
- Maintenance Intervals.......................................21
- Air Filter ...........................................................22
- Fuel Filter..........................................................22
- Spark Plug.........................................................23
- Cooling System.................................................23
- Exhaust System.................................................24
- Carburetor Adjustment......................................25
- Guide Bar and Saw Chain Replacement...........26
- Filing Saw Chain ..............................................28
Troubleshooting.......................................................29
Storage .....................................................................30
6SHFL¿FDWLRQV ...........................................................31
6SHFL¿FDWLRQVGHVFULSWLRQVDQGLOOXVWUDWLYHPDWHULDO
in this literature are as accurate as known at the time
RISXEOLFDWLRQEXWDUHVXEMHFWWRFKDQJHZLWKRXW
notice. Illustrations may include optional equipment
DQGDFFHVVRULHVDQGPD\QRWLQFOXGHDOOVWDQGDUG
equipment.
TABLE OF CONTENTS
Introduction................................................................2
- The Operator's Manual........................................2
- The Safety Manual..............................................2
Safety .........................................................................3
- Manual Safety Symbols and Important
Information.........................................................3
- International Symbols.........................................4
- Personal Condition and Safety Equipment.........5
- Kickback.............................................................6
- Equipment...........................................................7
Description.................................................................8
Contents ...................................................................10
Assembly..................................................................10
- Handle Shaft Assembly.....................................10
- Drive Shaft/Power Head...................................11
- Cutting Attachment to Drive Shaft Installation 12
- Throttle Linkage and Ignition Leads ................13
- Saw Chain Tension Adjustment........................15
Operation..................................................................16
- Fuel...................................................................16
- Lubricating the Guide Bar and Saw Chain.......17
- Adjusting Automatic Oiler................................17
- Starting Cold Engine.........................................18
- Starting Warm Engine.......................................19
- Stopping Engine................................................19
- Pruning Techniques...........................................20
INTRODUCTION
Welcome to the ECHO family. is ECHO product was designed and manufactured to provide long life and on-the-
job-dependability. Read and understand this manual. You will nd it easy to use and full of helpful operations tips and
SAFETY messages.
THE OPERATOR'SMANUAL
Keep it in a safe place for future reference. Contains specications and
information for safety, operation, maintenance, storage, and assembly
specic to this product.

POWER PRUNERTM
OPERATOR'SMANUAL 3
SAFETY
MANUAL SAFETY SYMBOLS AND IMPORTANT INFORMATION
INTERNATIONAL SYMBOLS
WARNING
The safety alert symbol accompanied by the word
“WARNING” calls attention to an act or condi-
tion which CAN lead to serious personal injury or
death if not avoided.
CIRCLE AND SLASH SYMBOL
7KLVV\PEROPHDQVWKHVSHFL¿FDFWLRQ
shown is prohibited. Ignoring these prohi-
bitions can result in serious or fatal injury.
CAUTION
The safety alert symbol accompanied by the word
“CAUTION” calls attention to an act or condition
which may lead to minor or moderate personal
injury if not avoided.
NOTE
7KLVHQFORVHGPHVVDJHSURYLGHVWLSVIRUXVHFDUHDQG
maintenance of the unit.
IMPORTANT
The enclosed message provides information neces-
sary for the protection of the unit.
DANGER
The safety alert symbol accompanied by the word
“DANGER” calls attention to an act or condition
which WILLlead to serious personal injury or
death if not avoided.
7KURXJKRXWWKLVPDQXDODQGRQWKHSURGXFWLWVHOI\RXZLOO¿QGVDIHW\DOHUWVDQGKHOSIXOLQIRUPDWLRQDOPHVVDJHVSUH-
ceded by symbols or key words. The following is an explanation of those symbols and key words and what they mean to
you.
 2SHUDWLQJDPower PrunerTM requires sound judgment and knowledge of the methods which should be applied in each
FXWWLQJVLWXDWLRQ,I\RXKDYHDQ\TXHVWLRQVRUSUREOHPVSOHDVHFRQWDFW\RXU(FKRGHDOHU
Hot
Surface
Symbol
description/application Symbol form/shape Symbol
description/application
Symbol form/shape
Read and understand
Operator's Manual.
Wear eyes, ears and
head protection
Fuel and oil mixture
Finger Severing
Safety/Alert
Avoid all power lines.
This unit is not insu-
lated against electri-
cal current.
Do not operate closer
than 15 M (50 ft.) from
electrical hazards.
Keep bystanders
at least 15 meters
(50 feet) away.
Plan retreat
path from falling
objects.
Wear hand
protection. Use
two handed.
DO NOT smoke
near fuel.
Symbol
description/application Symbol form/shape Symbol
description/application
Symbol form/shape
Carburetor adjustment
- Idle speed
Carburetor adjustment
- High speed mixture
Emergency stop
Carburetoradjustment
- Low speed mixture
DO NOT allow
Àames or sparNs
near fuel.
Wear slip resistant
foot wear.
Ignition
ON/OFF
Chain lubrication
Primer bulb
ChoNe Control
"Cold Start"
Position
(ChoNe Closed)
ChoNe Control
"Run"
Position
(ChoNe Open)
Guaranteed
sound power
level
Start Engine

4
Physical Condition
Your judgment and physical dexterity may not be good:
 LI\RXDUHWLUHGRUVLFN
 LI\RXDUHWDNLQJPHGLFDWLRQ
 LI\RXKDYHWDNHQDOFRKRORUGUXJV
Operate unit only if you are physically and mentally well.
Eye Protection
Wear eye protection that meets ANSI Z87.1 or CE re-
quirements whenever you operate the unit
Face and Head Protection
:KHQWULPPLQJRYHUKHDGDOZD\VZHDUKHDGSURWHFWLRQ
meeting ANSI Z89.1 or CE requirements with a full face
shield. Head protection with full face shield will help
protect you from falling branches and debris.
Hand Protection
:HDUQRVOLSKHDY\GXW\ZRUNJORYHVWRLPSURYH\RXU
grip on the unit handles. Gloves also reduce the transmis-
sion of machine vibration to your hands.
Vibration and Cold
,WLVEHOLHYHGWKDWDFRQGLWLRQFDOOHG5D\QDXG¶V3KHQRPHQRQZKLFKDIIHFWVWKH¿QJHUVRIFHUWDLQLQGLYLGXDOVPD\EH
brought about by exposure to vibration and cold. Exposure to vibration and cold may cause tingling and burning sen-
VDWLRQVIROORZHGE\ORVVRIFRORUDQGQXPEQHVVLQWKH¿QJHUV7KHIROORZLQJSUHFDXWLRQVDUHVWURQJO\UHFRPPHQGHG
because the minimum exposure which might trigger the ailment is unknown.
 .HHS\RXUERG\ZDUPHVSHFLDOO\WKHKHDGQHFNIHHWDQNOHVKDQGV
and wrists.
 0DLQWDLQJRRGEORRGFLUFXODWLRQE\SHUIRUPLQJYLJRURXVDUP 
exercises during frequent work breaks and also by not smoking.
 /LPLWWKHKRXUVRIRSHUDWLRQ7U\WR¿OOHDFKGD\ZLWKMREVZKHUH 
operating the unit or other hand-held power equipment is not
required.
 ,I\RXH[SHULHQFHGLVFRPIRUWUHGQHVVDQGVZHOOLQJRIWKH¿QJHUV 
IROORZHGE\ZKLWHQLQJDQGORVVRIIHHOLQJFRQVXOW\RXUSK\VLFLDQ 
before further exposing yourself to cold and vibration.
PERSONAL CONDITION AND SAFETY EQUIPMENT
WARNING
Power PrunerTM users risk injury to themselves and others if the Power PrunerTM is used improperly and or safety
precautions are not followed. Proper clothing and safety gear must be worn when operating a Power PrunerTM.
Hearing Protection
ECHO recommends wearing hearing protection whenever
XQLWLVXVHG,IWKLVJXLGHOLQHLVQRWIROORZHGKHDULQJORVV
can occur.
Proper Clothing
:HDUVQXJ¿WWLQJGXUDEOHSURWHFWLYHFORWKLQJFKDLQVDZ
safety pants or chaps are recommended.
3DQWVVKRXOGKDYHORQJOHJVVKLUWVZLWKORQJVOHHYHV
'2127:($56+2576
'2127:($57,(66&$59(6-(:(/5<RU
clothing with loose or hanging items that could become
entangled in moving parts or surrounding growth.
Wear sturdy protective safety shoes or boots with non-
VNLGVROHV
'2127:($523(172('6+2(6
'212723(5$7(81,7%$5()227('
Keep long hair away from engine and air intake. Retain
hair with cap or net.
Hot Humid Weather
+HDY\SURWHFWLYHFORWKLQJFDQLQFUHDVHRSHUDWRUIDWLJXH
which may lead to heat stroke. Schedule heavy work for
early morning or late afternoon hours when temperatures
are cooler.

POWER PRUNERTM
OPERATOR'SMANUAL 5
DANGER
All over head electrical conductors and communications wires can
KDYHHOHFWULFLW\ÀRZZLWKKLJKYROWDJHVThis unit is not insulated
against electrical current. Never touch wires directly or indirectly
ZKHQSUXQLQJRWKHUZLVHVHULRXVLQMXU\RUGHDWKPD\UHVXOW
WARNING
Do not operate this product indoors or in inadequately ventilated
areas. Engine exhaust contains poisonous emissions and can cause
serious injury or death.
Read the Manuals
 3URYLGHDOORSHUDWRUVRIWKLVHTXLSPHQWZLWKWKH2SHUDWRUV0DQXDO
and instructions for safe operation.
Clear the Work Area
 6SHFWDWRUVDQGIHOORZZRUNHUVPXVWEHZDUQHGDQGFKLOGUHQDQG
animals prevented from coming nearer than 15 m (50 ft.) while the
unit is in use.
Use Proper Clothing & Equipment
$OZD\VZHDUKHDGSURWHFWLRQZLWKIXOOIDFHVKLHOGWRKHOSSURWHFW
against falling branches and debris.
Keep A Firm Grip
 *ULS3RZHU3UXQHUTMZLWKERWKKDQGVZLWKWKXPEVDQG¿QJHUVHQFLU-
FOLQJWKHKDQGOHDQGVKDIWWXEH
Review the area to be trimmed.
 /RRNIRUKD]DUGVWKDWFRXOGFRQWULEXWHWRXQVDIHFRQGLWLRQV'2
127RSHUDWHXQLWLIDQ\ZLUHVSRZHUWHOHSKRQHFDEOHHWFDUH
closer than 15 m to any part of the operator or unit.
Repetitive Stress Injuries
,WLVEHOLHYHGWKDWRYHUXVLQJWKHPXVFOHVDQGWHQGRQVRIWKH¿QJHUVKDQGVDUPVDQGVKRXOGHUVPD\FDXVHVRUHQHVV
VZHOOLQJQXPEQHVVZHDNQHVVDQGH[WUHPHSDLQLQWKRVHDUHDV&HUWDLQUHSHWLWLYHKDQGDFWLYLWLHVPD\SXW\RXDWDKLJK
ULVNIRUGHYHORSLQJD5HSHWLWLYH6WUHVV,QMXU\56,$QH[WUHPH56,FRQGLWLRQLV&DUSDO7XQQHO6\QGURPH&76ZKLFK
FRXOGRFFXUZKHQ\RXUZULVWVZHOOVDQGVTXHH]HVDYLWDOQHUYHWKDWUXQVWKURXJKWKHDUHD6RPHEHOLHYHWKDWSURORQJHG
exposure to vibration may contribute to CTS. CTS can cause severe pain for months or even years.
7RUHGXFHWKHULVNRI56,&76GRWKHIROORZLQJ
 $YRLGXVLQJ\RXUZULVWLQDEHQWH[WHQGHGRUWZLVWHGSRVLWLRQ,Q-
VWHDGWU\WRPDLQWDLQDVWUDLJKWZULVWSRVLWLRQ$OVRZKHQJUDVSLQJ
XVH\RXUZKROHKDQGQRWMXVWWKHWKXPEDQGLQGH[¿QJHU
 7DNHSHULRGLFEUHDNVWRPLQLPL]HUHSHWLWLRQDQGUHVW\RXUKDQGV
 5HGXFHWKHVSHHGDQGIRUFHZLWKZKLFK\RXGRWKHUHSHWLWLYHPRYH-
ment.
 'RH[HUFLVHVWRVWUHQJWKHQWKHKDQGDQGDUPPXVFOHV
 ,PPHGLDWHO\VWRSXVLQJDOOSRZHUHTXLSPHQWDQGFRQVXOWDGRFWRULI
\RXIHHOWLQJOLQJQXPEQHVVRUSDLQLQWKH¿QJHUVKDQGVZULVWVRU
DUPV7KHVRRQHU56,&76LVGLDJQRVHGWKHPRUHOLNHO\SHUPDQHQW
nerve and muscle damage can be prevented.

6
Keep A Solid Stance
 0DLQWDLQIRRWLQJDQGEDODQFHDWDOOWLPHV'RQRWVWDQGRQVOLSSHU\
uneven or unstable surfaces. Do not work in odd positions or on
ladders. Do not overreach.
 2SHUDWHWKH3RZHU3UXQHUTM only from the ground or out of an ap-
proved bucket lift.
 $OZD\VHYDOXDWHWKHEUDQFKHVWREHSUXQHGIRUKD]DUGVVXFKDVORRVH
dead branches which may fall and strike the operator or helpers.
5HPRYHKD]DUGVEHIRUHSUXQLQJ
 3ODQUHWUHDWSDWKIURPIDOOLQJREMHFWV
 &XWEUDQFKHVERXQFHZKHQVWULNLQJJURXQG
 &KHFNWKDWVKRXOGHUKDUQHVVLVDGMXVWHGIRUVDIHFRPIRUWDEOHRSHUD-
tion. See picture at right for proper adjustment.
 7XUQWKH3RZHU3UXQHUTM off when moving from tree to tree.
 $YRLGDQ\FRQWDFWZLWKVDZFKDLQ
Avoid Hot Surfaces
.HHSH[KDXVWDUHDFOHDURIÀDPPDEOHGHEULV$YRLGFRQWDFWGXULQJ
and immediately after operation.
Transporting Unit
 :KHQWUDQVSRUWLQJWKHXQLWHPSW\WKHIXHOWDQNSXWWKHXQLWLQDQ
XSULJKWSRVLWLRQDQGVHFXUHLW¿UPO\)DLOXUHWRGRVRFRXOGUHVXOWLQ
damage or injury.
WARNING
Kickback can lead to dangerous loss of control of the Power PrunerTM and result in serious injury to the operator or
any one standing close by. Hold the Power PrunerTM¿UPO\ZLWKERWKKDQGVZLWKWKXPEVDQG¿QJHUVHQFLUFOLQJWKH
front and rear handles. Be aware of the down and outward path the pruner will take after the cut is made.
KICKBACK
Kickback may occur when the moving saw chain at the nose or tip of
WKHJXLGHEDUWRXFKHVDQREMHFWRUZKHQWKHZRRGFORVHVLQDQGSLQFKHV
the saw chain in the cut. In some cases this may cause a lightning-fast
UHYHUVHDFWLRQNLFNLQJWKHJXLGHEDUDQGVDZFKDLQXSDQGEDFNRU
down and back towards the operator. Either of these reactions may
cause the operator to lose control of the Power PrunerTM which could
result in serious personal injury.
:LWKDEDVLFXQGHUVWDQGLQJRINLFNEDFN\RXFDQUHGXFHRUHOLPLQDWH
the element of surprise which contributes to accidents.
Avoid contact of the guide bar tip with any object while the saw chain
is moving.
&XWRQO\ZRRG$YRLGVWULNLQJFRQFUHWHPHWDOZLUHRURWKHUREVWUXF-
tions which could cause kickback or damage to the saw chain.
,IWKHVDZFKDLQGRHVVWULNHDIRUHLJQREMHFWLPPHGLDWHO\VWRSWKHHQ-
JLQHLQVSHFWDQGUHSDLUWKH3RZHU3UXQHUTM if necessary.

POWER PRUNERTM
OPERATOR'SMANUAL 7
EQUIPMENT
WARNING
6HULRXVLQMXU\PD\UHVXOWIURPWKHXVHRIQRQDSSURYHGJXLGHEDUDQGVDZFKDLQFRPELQDWLRQV(&+2,1&ZLOOQRW
be responsible for the failure of cutting devices or accessories which have not been tested and approved by ECHO
for use with this unit. Read and comply with all safety instructions listed in this manual.
 &KHFNXQLWIRUORRVHPLVVLQJQXWVEROWVDQGVFUHZV7LJKWHQDQGRUUHSODFHDVQHHGHG
Guide Bar and Saw Chain
 &KHFNWKDWWKHFXWWLQJDWWDFKPHQWJXLGHEDUDQGVDZFKDLQLV¿UPO\DWWDFKHGDQGLQVDIHRSHUDWLQJFRQGLWLRQ
 8VHRQO\RQH(FKRDSSURYHGH[WHQVLRQRQWKHSUXQHU
 'RQRWKLWURFNVVWRQHVWUHHVWXPSVDQGRWKHUIRUHLJQREMHFWVZLWKWKHVDZFKDLQ
 'RQRWFXWLQWRWKHJURXQGZLWKWKHVDZFKDLQ
 ,IFXWWLQJDWWDFKPHQWHQGVWULNHVDQREVWUXFWLRQVWRSHQJLQHLPPHGLDWHO\DQGLQVSHFWVDZFKDLQIRUGDPDJH
 'RQRWRSHUDWHZLWKDGXOOIUDFWXUHGRUGLVFRORUHGVDZFKDLQ
 5HPRYHDOOIRUHLJQREMHFWVIURPZRUNDUHD
 $OZD\VFRYHUWKHJXLGHEDUDQGVDZFKDLQZLWKJXLGHEDUFRYHUGXULQJWUDQVSRUWDWLRQDQGIRUVWRUDJH
WARNING
0RYLQJSDUWVFDQDPSXWDWH¿QJHUVRUFDXVHVHYHUHLQMXULHV.HHSKDQGVFORWKLQJDQGORRVHREMHFWVDZD\IURPDOO
openings.
ALWAYSVWRSHQJLQHGLVFRQQHFWVSDUNSOXJDQGPDNHVXUHDOOPRYLQJSDUWVKDYHFRPHWRDFRPSOHWHVWRS
EHIRUHUHPRYLQJREVWUXFWLRQVFOHDULQJGHEULVRUVHUYLFLQJXQLW
DO NOT start or operate unit unless all guards and protective covers are properly assembled to unit.
NEVER reach into any opening while the engine is running. Moving parts may not be visible through openings.
WARNING
&KHFNIXHOV\VWHPIRUOHDNVGXHWRIXHOWDQNGDPDJHHVSHFLDOO\LIWKHXQLWLVGURSSHG,IGDPDJHRUOHDNVDUHIRXQG
GRQRWXVHXQLWRWKHUZLVHVHULRXVSHUVRQDOLQMXU\RUSURSHUW\GDPDJHPD\RFFXU+DYHXQLWUHSDLUHGE\DQDXWKR-
UL]HGVHUYLFLQJGHDOHUEHIRUHXVLQJ

8
1
12
11
10
2
9
8
7
6
5
4
DESCRIPTION
Locate this safety decal on your unit. Make sure the decals are legible and that you understand and follow the instruc-
WLRQVRQWKHP,IDGHFDOFDQQRWEHUHDGDQHZRQHFDQEHRUGHUHGIURP\RXU(&+2GHDOHU6HH3$57625'(5,1*
LQVWUXFWLRQVIRUVSHFL¿FLQIRUPDWLRQ
22
13
15
16
17
18
20
19
21
3
14

POWER PRUNERTM
OPERATOR'SMANUAL 9
1. POWER HEAD,QFOXGHVWKH(QJLQH&OXWFK)XHO6\VWHP,JQLWLRQ6\VWHPDQG6WDUWHU
2. THROTTLE TRIGGER - Spring loaded to return to idle when released. During acceleration press trigger gradu-
ally for best operating technique.
3. SHOULDER HARNESS - An adjustable strap that suspends the unit from the operator.
4. CUTTING ATTACHMENT - 6HDOHGJHDUUDWLRLVUHGXFWLRQ
5. CUTTING SHOE8VHGWRFDSWXUHDQGVWDELOL]HEUDQFKZKLOHFXWWLQJ3ODFHFXWWLQJVKRHDJDLQVWEUDQFKDFFHOHU-
ate and lower saw chain into branch.
6. GUIDE BAR - 305 mm (12 in.) guide bar.
7. SAW CHAIN - &KDLQVHUYLQJDVDFXWWLQJWRRO
8. AUTOMATIC OILER ASSEMBLY -6HOIRLOLQJ8VHKLJKTXDOLW\ORZYLVFRVLW\QRQGHWHUJHQWEDUDQGFKDLQRLO
9. LOWER SHAFT TUBE'XUDEOH¿EHUJODVVPHVKKRXVLQJ
10. STOP SWITCH0RXQWHGRQWRSRIKDQGOHDVVHPEO\0RYHVZLWFKIRUZDUGWRUXQEDFNWRVWRS
11. THROTTLE TRIGGER LOCKOUT - This lever must be depressed before throttle trigger can be operated.
12. THROTTLE HANDLE ASSEMBLY - Sturdy handle for right hand placement. Includes stop switch and throttle
trigger.
13. TOP GUARD - Protects arm from hot engine.
14. RECOIL STARTER3XOOUHFRLOKDQGOHVORZO\XQWLOVWDUWHUHQJDJHVWKHQTXLFNO\DQG¿UPO\:KHQHQJLQHVWDUWV
return handle slowly. DO NOT let handle snap back or damage will occur.
15. SPARK ARRESTOR - CATALYTIC MUFFLER / MUFFLER -7KHPXIÀHURUFDWDO\WLFPXIÀHUFRQWUROVH[KDXVW
QRLVHDQGHPLVVLRQ7KHVSDUNDUUHVWRUVFUHHQSUHYHQWVKRWJORZLQJSDUWLFOHVRIFDUERQIURPOHDYLQJWKHPXIÀHU
.HHSH[KDXVWDUHDFOHDURIÀDPPDEOHGHEULV
16. FUELTANK&RQWDLQVIXHODQGIXHO¿OWHU
17. FUELTANK CAP - Covers and seals fuel tank opening.
18. CHOKE - Located above air cleaner housing. Move lever to starting position ( ) (close choke) and back to run
position ( ) (open choke).
19. AIR CLEANER ASSEMBLY&RQWDLQVUHSODFHDEOHDLU¿OWHUHOHPHQW
20. PURGE BULB3XPSLQJSXUJHEXOEEHIRUHVWDUWLQJHQJLQHGUDZVIUHVKIXHOIURPWKHIXHOWDQNSXUJLQJDLUIURP
WKHFDUEXUHWRU3XPSSXUJHEXOEXQWLOIXHOLVYLVLEOHDQGÀRZVIUHHO\LQWKHFOHDUIXHOWDQNUHWXUQOLQH3XPSSXUJH
bulb an additional 4 or 5 times.
21. SPARK PLUG - Provides spark to ignite fuel mixture.
22. GUIDE BAR COVER - 8VHGWRFRYHUJXLGHEDUDQGVDZFKDLQGXULQJWUDQVSRUWDQGVWRUDJH5HPRYHJXLGHEDU
cover before using unit.

10
CONTENTS
Due to packaging restriction the ECHO product you have purchased requires some assembly.
$IWHURSHQLQJWKHFDUWRQFKHFNIRUGDPDJH,PPHGLDWHO\QRWLI\\RXUUHWDLOHURU(&+2'HDOHURIGDPDJHGRUPLVVLQJ
SDUWV8VHWKHFRQWHQWVOLVWWRFKHFNIRUPLVVLQJSDUWV
___ Power Head
___ Handle Shaft Assembly
___ Drive Shaft Assembly
___ Cutting Attachment W/ Guide Bar and Saw Chain
___ Operator's Manual
___ Safety Glasses
___ Shoulder Harness
___ Guide Bar Cover
___ Clip
___ Assembly Tool (s)
ASSEMBLY
Parts Required: 3RZHU+HDG+DQGOH6KDIW$VVHPEO\'ULYH6KDIW 
   $VVHPEO\&XWWLQJ$WWDFKPHQW
HANDLE SHAFT / DRIVE SHAFT
1. Remove protective caps from handle shaft assembly.
2. Loosen clamping bolts (A) on drive shaft.
 3XOOÀH[LEOHGULYHVKDIWFRXSOHU%LQFKHVRXWRIKDQGOHVKDIW
A
B

POWER PRUNERTM
OPERATOR'SMANUAL 11
HANDLE SHAFT / POWER HEAD
1. Remove protective cap from drive shaft end.
2. Loosen two (2) clamping screws (A) and remove locating screw
(B).
 3XOOÀH[LEOHGULYHVKDIWFRXSOHULQRXWRIGULYHVKDIWDVVHPEO\
 $OLJQÀH[LEOHGULYHVKDIWFRXSOHUZLWKHQJLQHVRFNHWDQGVOLGH
together until locating hole in shaft is visible through locating hole
in engine housing.
5. Install locating screw and tighten clamping bolts.
AB
 $OLJQÀH[LEOHGULYHVKDIWFRXSOHUZLWKGULYHVKDIWVRFNHWDQGVOLGH
together until handle shaft is fully seated into drive shaft.
5. Tighten clamping bolts (A).
A

12
WARNING
6DZ&KDLQLVVKDUS$OZD\VZHDUJORYHVZKHQKDQGOLQJDVVHPEO\
otherwise serious personal injury may result.
1. Loosen the two (2) screws (C) and remove locator screw (D) on
cutting attachment.
2. Loosen clamp knob (E) turning counter clockwise.
 3XOOXSSHUWXEH)RXWRI¿EHUJODVVORZHUWXEHPP
LQWKHQVOLGH)EDFNLQWR¿EHUJODVVORZHUWXEHH[SRVLQJLQQHU
drive shaft (G). Align and join star shaped drive end of inner drive
shaft (G) with cutting attachment shaft (H).
 $OLJQULGJHV-RQXSSHUWXEHZLWKVHDPVLQFXWWLQJDWWDFKPHQW
5. Slide together aligning locator screw hole (D) in cutting attachment
with locating hole (I) in upper tube.
6. Install locator screw (D) and tighten. Tighten two (2) cutting at-
tachment screws (C).
7. Extend upper tube to desired length. Tighten center clamp knob (E)
turning clockwise.
D
C
CUTTING ATTACHMENT TO DRIVE SHAFT INSTALLATION
C
I
G
H
G
J
E
F
D

POWER PRUNERTM
OPERATOR'SMANUAL 13
THROTTLE LINKAGE AND IGNITION LEADS
 &ORVHFKRNHDQGUHPRYHDLU¿OWHUFRYHU
2. Place throttle cable (A) and brass cable guide (B) through adjust-
PHQW¿[WXUH&)XOO\VHDWEUDVVFDEOHJXLGHLQDGMXVWPHQW¿[WXUH
and seat cable end into large hole in carburetor swivel (D).
 5RWDWHWKHDGMXVWPHQW¿[WXUHVRWKDWWKHQRWFK(IDFHVHQJLQH
 ,QVHUWRQHHQGRIFOLS)LQWRQRWFKLQWKHDGMXVWPHQW¿[WXUH
5. Push clip to fully seat both ends into notch.
6. Assure both ends of clip are secured in notch as shown. Con-
¿UPWKDWWKHWKURWWOHFDEOHGRHVQRWPRYHZKHQEUDVVFDEOHJXLGH
(B) is pulled. Check throttle for freedom of movement and that
wide open throttle / low idle extremes are adjusted properly. The
WKURWWOHOLQNDJHPXVWEHDGMXVWHGE\PRYLQJWKHDGMXVWPHQW¿[WXUH
Consult with your Echo Dealer for correct adjustment procedure.
E
F
AD
C
B
E
F
B

14
 &RQQHFWLJQLWLRQVWRSOHDGV*+IURPWKURWWOHFDEOHWXELQJWR
LJQLWLRQOHDGV*+RQHQJLQH
8. Secure ignition leads against engine housing with clip (I).
 ,QVWDOODLU¿OWHUDQGFRYHU
G
H
I
J
 ,QVWDOOWKURWWOHOLQNDJHFDEOHLQWRIDQFRYHUFOLS-

POWER PRUNERTM
OPERATOR'SMANUAL 15
B
A
SAW CHAIN TENSION ADJUSTMENT
WARNING
Never try to replace or adjust guide bar and saw chain with engine
running. Always disconnect spark plug wire before servicing guide
bar and saw chain. This saw chain is 9(5<VKDUSZHDUKHDY\
gloves to protect your hands when handling it. Wear eye protec-
WLRQPHHWLQJ&(RU$16,VSHFL¿FDWLRQ=
IMPORTANT
Always loosen guide bar nuts before turning the chain tension ad-
MXVWHURWKHUZLVHWKHVSURFNHWFRYHUDQGWHQVLRQHUZLOOEHGDPDJHG
To Adjust Saw Chain Tension
1. Move stop switch to STOP position.
2. Disconnect spark plug lead.
 /RRVHQWZRJXLGHEDUQXWV$XQWLO¿QJHUWLJKW
 +ROGWKHEDUQRVHXSDQGWXUQWKHDGMXVWHUVFUHZ%FORFNZLVHXQ-
WLOWKHFKDLQ¿WVVQXJO\DJDLQVWWKHXQGHUVLGHRIWKHEDUDVVKRZQ
Cold Chain Only - turn adjuster screw CW an additional 1/8 - 1/4
turn.
5. Tighten both guide bar nuts with nose held up. Tighten rear nut
¿UVW
6. Pull the chain around the guide bar by hand. Reduce the chain ten-
sion if you feel tight spots.
 :KHQFKDLQLVSURSHUO\WHQVLRQHGWLJKWHQJXLGHEDUQXWVVHFXUHO\
IMPORTANT
7LJKWHQJXLGHEDUQXWVWR1PLQOEV'2127
over-tighten nuts. Damage may result.
8. Keep chain properly tensioned at all times.
NOTE
All chains require frequent adjustment.
9. Connect spark plug lead.

16
OPERATION
WARNING
0RYLQJSDUWVFDQDPSXWDWH¿QJHUVRUFDXVHVHYHUHLQMXULHV.HHSKDQGVFORWKLQJDQGORRVHREMHFWVDZD\IURPDOO
RSHQLQJV$OZD\VVWRSHQJLQHGLVFRQQHFWVSDUNSOXJDQGPDNHVXUHDOOPRYLQJSDUWVKDYHFRPHWRDFRPSOHWH
VWRSEHIRUHUHPRYLQJREVWUXFWLRQVFOHDULQJGHEULVRUVHUYLFLQJXQLW
FUEL
NOTICE:8VHRIXQPL[HGLPSURSHUO\PL[HGRUIXHOROGHUWKDQGD\VVWDOHIXHOPD\FDXVHKDUGVWDUWLQJSRRU
SHUIRUPDQFHRUVHYHUHHQJLQHGDPDJHDQGYRLGWKHSURGXFWZDUUDQW\5HDGDQGIROORZLQVWUXFWLRQVLQWKH6WRUDJH
section of this manual.
Petrol - Fuel is a mixture of regular grade petrol and an air-cooled 2-stroke engine oil of reputable brand name. Mini-
mum 89 Octane unleaded petrol is recommended. Do not use fuel containing methyl alcohol or more than 10 % of ethyl
alcohol.
7ZR6WURNH2LO5HFRPPHQGHGPL[WXUHUDWLRIRU,62/(*'6WDQGDUG,62&'-$62)'JUDGH
and ECHO Premium 50 : 1 oil.
Handling Fuel
DANGER
)XHOLV9(5<ÀDPPDEOH8VHH[WUHPHFDUHZKHQPL[LQJVWRULQJRUKDQGOLQJRUVHULRXVSHUVRQDOLQMXU\PD\UHVXOW
8VHDQDSSURYHGIXHOFRQWDLQHU
'2127VPRNHQHDUIXHO
'2127DOORZÀDPHVRUVSDUNVQHDUIXHO
)XHOWDQNVFDQVPD\EHXQGHUSUHVVXUH$OZD\VORRVHQIXHOFDSVVORZO\DOORZLQJSUHVVXUHWRHTXDOL]H
1(9(5UHIXHODXQLWZKHQWKHHQJLQHLV+27RU5811,1*
'2127¿OOIXHOWDQNVLQGRRUV$/:$<6¿OOIXHOWDQNVRXWGRRUVRYHUEDUHJURXQG
'2127RYHU¿OOIXHOWDQN:LSHXSVSLOOVLPPHGLDWHO\
6HFXUHO\WLJKWHQIXHOWDQNFDSDQGFORVHIXHOFRQWDLQHUDIWHUUHIXHOLQJ
,QVSHFWIRUIXHOOHDNDJH,IIXHOOHDNDJHLVIRXQGGRQRWVWDUWRURSHUDWHXQLWXQWLOOHDNDJHLVUHSDLUHG
0RYHDWOHDVWPIWIURPUHIXHOLQJORFDWLRQEHIRUHVWDUWLQJWKHHQJLQH
WARNING
2SHUDWLRQRIWKLVHTXLSPHQWPD\FUHDWHVSDUNVWKDWFDQVWDUW¿UHV7KLVXQLWLVHTXLSSHGZLWKDVSDUNDUUHVWRUWR
SUHYHQWGLVFKDUJHRIKRWSDUWLFOHVIURPWKHHQJLQH0HWDOEODGHXVHDOVRFDQFUHDWHVSDUNVLIWKHEODGHVWULNHVURFNV
PHWDORURWKHUKDUGREMHFWV&RQWDFWORFDO¿UHDXWKRULWLHVIRUODZVRUUHJXODWLRQVUHJDUGLQJ¿UHSUHYHQWLRQUHTXLUH-
ments.

POWER PRUNERTM
OPERATOR'SMANUAL 17
Mixing Instructions
1. Fill an approved fuel container with half of the required amount of
gasoline.
2. Add the proper amount of 2-stroke oil to gasoline.
3. Close container and shake to mix oil with gasoline.
 $GGUHPDLQLQJJDVROLQHFORVHIXHOFRQWDLQHUDQGUHPL[
IMPORTANT
Spilled fuel is a leading cause of hydrocarbon emissions. Some
states may require the use of automatic fuel shut-off containers
to reduce fuel spillage.
After use
 '2127VWRUHDXQLWZLWKIXHOLQLWVWDQN/HDNVFDQRFFXU5HWXUQ
unused fuel to an approved fuel storage container.
Storage - Fuel storage laws vary by locality. Contact your local gov-
HUQPHQWIRUWKHODZVDIIHFWLQJ\RXUDUHD$VDSUHFDXWLRQVWRUHIXHOLQ
DQDSSURYHGDLUWLJKWFRQWDLQHU6WRUHLQDZHOOYHQWLODWHGXQRFFXSLHG
EXLOGLQJDZD\IURPVSDUNVDQGÀDPHV
IMPORTANT
Stored fuel ages. Do not mix more
fuel than you expect to use in thirty
GD\VQLQHW\GD\VZKHQD
IXHOVWDELOL]HULVDGGHG
IMPORTANT
Stored two-stroke fuel may separate.
ALWAYS shake fuel container thor-
oughly before each use.
Automatic Oiling System
 :LSHGHEULVIURPDURXQGRLO¿OOFDS
 5HPRYHRLO¿OOFDSDQG¿OOUHVHUYRLUZLWKDTXDOLW\ORZYLVFRVLW\
guide bar and saw chain oil.
IMPORTANT
7RSUHYHQWSODVWLFGHWHULRUDWLRQGRQRWXVHV\QWKHWLFRUVLOLFRQH
based oil.
ADJUSTING AUTOMATIC OILER
 )URPERWWRPRIJHDUFDVHWXUQDGMXVWPHQWVFUHZ$FORFNZLVHWR
decrease oil volume - counter clockwise to increase oil volume.
NOTE
7KHDXWRPDWLFRLOHULVSUHVHWWRGHOLYHUDVXI¿FLHQWRLOGLVFKDUJH
volume during normal operating conditions. During heavy or dry
FXWWLQJFRQGLWLRQVWKHRLOGLVFKDUJHYROXPHPD\EHLQFUHDVHGWRDV-
VXUHDGHTXDWHOXEULFDWLRQ,IRLOLVOHDNLQJIURPWKHEDUFRYHUDUHD
UHGXFHWKHRLOGLVFKDUJHYROXPH5H¿OOWKHRLOUHVHUYRLUZLWKHDFK
tank of fuel.
NOTE
9HU\OLWWOHYLVLEOHRLORQWKHVDZFKDLQZLOOSURYLGHVXI¿FLHQWOXEUL-
cation.
LUBRICATING THE GUIDE BAR AND SAW CHAIN
A

18
STARTING COLD ENGINE
WARNING
7KHDWWDFKPHQWVKRXOGQRWPRYHDWLGOHRWKHUZLVHVHULRXVSHUVRQDO
injury may result.
1. Stop Switch
Move stop switch button (A) forward away from the STOP
position.
2. Choke
Move choke (B) to “Cold Start” ( ) Position.
3. Purge Bulb
Pump purge bulb&XQWLOIXHOLVYLVLEOHDQGÀRZVIUHHO\LQWKH
clear fuel tank return line. Pump bulb an additional 4 or 5 times.
4. Recoil Starter
/D\WKHXQLWRQDÀDWDUHDDQGNHHSPRYDEOHDWWDFKPHQWSDUWV
clear of all obstacles. Firmly grasp throttle handle with left hand.
5DSLGO\SXOOUHFRLOVWDUWHUKDQGOHURSH'XQWLOHQJLQH¿UHVRU
PD[LPXP¿YH>@SXOOV
5. Choke
 $IWHUHQJLQH¿UHVRU¿YH>@SXOOVPRYHFKRNHOHYHUEDFNWR
“Run” ( ) position. Pull recoil starter handle/rope until engine
starts and runs. Allow unit to warm up at idle for several minutes.
NOTE
,IHQJLQHGRHVQRWVWDUWZLWKFKRNHLQ³5XQ´SRVLWLRQDIWHUSXOOV
repeat instructions 2 - 5.
 $IWHUHQJLQHZDUPVXSJUDGXDOO\GHSUHVVWKURWWOHWULJJHUWRLQ-
crease engine RPM to operating speed.
A
B
CD
Run
Cold Start

POWER PRUNERTM
OPERATOR'SMANUAL 19
STARTING WARM ENGINE
The starting procedure is the same as Cold Start except DO NOT close
the choke.
WARNING
7KHDWWDFKPHQWVKRXOGQRWPRYHDWLGOHRWKHUZLVHVHULRXVSHUVRQDO
injury may result.
NOTE
,IDWWDFKPHQWPRYHVUHDGMXVWFDUEXUHWRUDFFRUGLQJWR³&DUEXUHWRU
Adjustment” instructions in this manual or see your ECHO Dealer.
1. Stop Switch.
Move Stop Switch button (A) forward away from the STOP posi-
tion.
2. Purge Bulb
Pump purge bulb&XQWLOIXHOLVYLVLEOHDQGÀRZVIUHHO\LQWKH
clear fuel tank return line. Pump bulb an additional 4 or 5 times.
3. Recoil Starter.
 /D\WKHXQLWRQDÀDWFOHDUDUHDDQG¿UPO\JUDVSthrottle handle
with left hand. Do not depress throttle trigger. Pull the recoil
VWDUWHUKDQGOH'XQWLOWKHHQJLQH¿UHV
NOTE
,IHQJLQHGRHVQRWVWDUWDIWHUSXOOVXVH&ROG6WDUW3URFHGXUH
STOPPING ENGINE
1. Throttle.
 5HOHDVHWKURWWOHWULJJHUDQGDOORZHQJLQHWRUHWXUQWRLGOHEHIRUH
stopping engine.
2. Stop Switch.
Move stop switch button (A) backward to STOP position.
WARNING
If engine does not stop when stop switch is moved to STOP posi-
WLRQFORVHFKRNH&2/'67$57SRVLWLRQWRVWDOOHQJLQH+DYH
your ECHO dealer repair stop switch before using pruner again.
A
Run
Cold Start
CD
A

20
NOTE
8VHRIPower PrunerTM may be subject to local regulations.
The Power PrunerTM is designed for light to medium trimming of limbs
and branches up to 203 mm (8 in.) in diameter. Follow these tips for
successful operation.
 3ODQFXWFDUHIXOO\&KHFNGLUHFWLRQEUDQFKZLOOIDOO
 3ODQUHWUHDWSDWKIURPIDOOLQJEUDQFK&XWEUDQFKHVERXQFHZKHQ
striking ground.
 /RQJEUDQFKHVVKRXOGEHUHPRYHGLQVHYHUDOSLHFHV
 'RQRWVWDQGGLUHFWO\EHQHDWKEUDQFKEHLQJFXW
 :KHQUHDG\WRFXW
Hold "cutting shoe" against branch. This will prevent whipping of the
branch. DO NOT use back and forth sawing action.
 /RRNRXWIRUEUDQFKLPPHGLDWHO\EHKLQGWKHEUDQFKEHLQJFXW,IVDZ
chain hits rear branch damage to saw chain may occur.
 $FFHOHUDWHWRIXOOWKURWWOH
 $SSO\FXWWLQJSUHVVXUH
 (DVHFXWWLQJSUHVVXUHZKHQQHDULQJHQGRIFXWWRPDLQWDLQFRQWURO
:KHQSUXQLQJDOLPEPPLQGLDPHWHURUODUJHUFXWDVIRO-
lows:
  8QGHUFXWOLPEGLDPHWHUQHDUWUHHWUXQN
2. Finish top cut slightly farther out on limb.
3. Flush cut stub at trunk.
 '2127XVHIRUIHOOLQJRUEXFNLQJ
PRUNING TECHNIQUES
CORRECT
GUIDE AGAINST
BRANCH
BLADE HITS REAR BRANCH
NOT
CORRECT
NOT
CORRECT
WARNING
(QJLQHH[KDXVW,6+27DQGFRQWDLQV&DUERQ0RQR[LGH&2DSRLVRQJDV%UHDWKLQJ&2FDQFDXVHXQFRQVFLRXV-
QHVVVHULRXVLQMXU\RUGHDWK([KDXVWFDQFDXVHVHULRXVEXUQV$/:$<6SRVLWLRQXQLWVRWKDWH[KDXVWLVGLUHFWHG
away from your face and body.