Edelbrock 5250 User manual

EDELBROCK HEAVY-DUTY TIE ROD SLEEVES
Catalog #5250, 5251, 5252
INSTALLATION INSTRUCTIONS
PostScript Picture
(ShockLogo.eps)
Please study these instructions carefully before installing your new Heavy-Duty Tie Rod Sleeves.
If you have any questions or problems, contact out Technical Hotline at: 1-800-416-8628,
7:00 am to 5:00 pm, Monday through Friday, Pacific Standard Time or e-mail us at
[email protected].
These are heavy-duty replacement parts for original tie rod sleeves and install basically in the same
manner as the original stock parts. See our catalog for complete application listing. To order a
catalog, please call (800) FUN-TEAM.
1. Installation of these parts requires precision front-end alignment equipment.
2. Installation should only be done by a qualified professional.
3. Following installation, drive vehicle about 10 miles and re-check all nuts for tightness.
Note: It is a good idea to periodically check suspension components for tightness and
potential problems.
Edelbrock Corporation
2700 California St.
Torrance, CA 90503
Technical Hotline: [phone]
Office: [phone]
©2001 Edelbrock Corporation Rev. 11/01