Edelbrock 72285 User manual

KING DEMON MICROSWITCH BRACKET
CATALOG #72285
INSTALLATION INSTRUCTIONS
1. Apply a small bead of thread lock to the end of the
supplied screws (A).
2. Insert screws (A) through bracket; (B) and tighten
into stand-offs(C).
3. Apply a small bead of thread lock to the end of the
supplied screws (E).
4. Insert screws (E) through microswitch (D) and
tighten into stand-offs (C).
5. Install microswitch bracket onto carburetor studs
over the base of the carburetor on the passenger
sideofthecarburetor(oppositesideofthelinkage).
6. Check for full throttle, microswitch operation, and
throttle return.
AB
C
D
E
©2002 Edelbrock Corporation Rev. 08/02
Brochure #63-0127
KING DEMON MICROSWITCH BRACKET
CATALOG #72285
INSTALLATION INSTRUCTIONS
1. Apply a small bead of thread lock to the end of the
supplied screws (A).
2. Insert screws (A) through bracket; (B) and tighten
into stand-offs(C).
3. Apply a small bead of thread lock to the end of the
supplied screws (E).
4. Insert screws (E) through microswitch (D) and
tighten into stand-offs (C).
5. Install microswitch bracket onto carburetor studs
over the base of the carburetor on the passenger
sideofthecarburetor(oppositesideofthelinkage).
6. Check for full throttle, microswitch operation, and
throttle return.
©2002 Edelbrock Corporation
AB
D
E
C
Rev. 08/02
Brochure #63-0127