Edimax EN-9260TX-E User manual

Description
The EN-9260TX-E network adapter for PCs with PCI Express slots offers the latest technology in power
management and Gigabit Ethernet network connectivity capability. The EN-9260TX-E’s full bandwidth capability
boasts a robust 1000Mbps capability through the PCI Express bus architecture. There’s no need to purchase a
new switch or broadband router since the adapter’s auto-negotiation feature works with your existing switch,
broadband router or hub to provide the highest network speed available (10/100 or 1000 Mbps). The adapter’s
automatic full duplex capability further increases bandwidth and eliminates packet collisions by allowing data to
flow in both directions at the same time.
First-class Reliability
The EN-9260TX-E’s exceptional chipset offers increased bandwidth and more functionality than other standard
PCI network adapters. The adapter is specifically designed to carry the full bandwidth capacity of the PCI Express
bus of 2.5 Gbps, thus eliminating collisions and latencies that exist with current 32 and 64 bit PCI bus
architectures.
Ease of Installation & Configuration
The EN-9260TX-E offers ease and flexibility of installation and configuration of the adapter through Plug & Play
technology. Simply place the adapter into the PCI Express slot in your PC and then turn on the PC; plug-n-play
automatically detects the new device. The adapter is fully compatible with Ethernet, Fast Ethernet, and Gigabit
Ethernet networks and the adapter’s 10/100/1000 Mbps auto negotiation ports eliminate any need for manual
switching. Best of all, the adapter is supported by all major operating systems including Vista and Linux OS.
User-friendly Setup CD Wizard and Driver*
To facilitate network connectivity, the EN-9260TX-E includes a user-friendly setup CD wizard. Its user interface
simplifies driver installation for immediate use of the device.
* The Setup CD Wizard is only compatible with Edimax network interface cards.
www.edimax.com
Gigabit Ethernet PCI Express Adapter
EN-9260TX-E
Copyright © 2012 Edimax Technology Co. Ltd. All rights reserved. Maximum performance, actual data rates and coverage may vary depending on network
conditions and environmental factors. Product specifications and design are subject to change without notice.

FEATURES AND TECHNICAL SPECIFICATIONS
•Complies with PCI Express 1.1 –x1 PCI Express standard
•IEEE 802.3, 802.3u, 802.3ab and 802.3x standards
•Supports 10/100/1000Mbps Auto Negotiation and Jumbo Frame
•Supports IEEE802.3x full-duplex Flow Control
•Supports IEEE802.1Q VLAN Tagging and IEEE802.1P Layer2 Priority Encoding
•Supports Wake on LAN and ACPI power management
•Supports IEEE802.3az energy efficient Ethernet function
•Includes a low-profile bracket
•Plug-and-Play
•Supports drivers for Novell 5.X/6.X, Windows 98/ME/NT4.0/2000/XP/Vista/7/8, Linux 2.4.x
HARDWARE INTERFACE COMPLIED STANDARDS LED Indicators
PCI Express Interface
One 10/100/1000 Mbps LAN port
IEEE 802.3, 802.3u, 802.3ab, 802.3x,
802.1q, 802.1p, 802.3az
Link/Act
1000M
INSTALLATION KIT CHIPSET HUMIDITY
Setup Wizard program with Driver
setup
Realtek RTL8168E Single Chip Operating: 10 to 90% RH (Non-
condensing)
Storage: 5 to 95% RH (Non-
condensing)
SYSTEM REQUIREMENTS BUS ARCHITECTURE TEMPERATURE
CPU: Pentium III 1G above or similar
Memory size: 256MB RAM or above
One CD-ROM drive
Hard Disk: Min. of 100MB disk space
One available PCI express slot
OS: Novell 5.X/6.X, Windows
98/ME/NT4.0/2000/XP/Vista/7/8,
Linux 2.4.x
PCI V 2.3/2.2/2.1, 32-bit, 66/33MHz Operating: 0 to 40℃
Storage: -40 to 70℃
DIMENSIONS Weight CERTIFICATIONS
64 x 39 mm 50g CE, FCC
TYPICAL SETUP DIAGRAM AND RELATED PRODUCTS
Gigabit Ethernet PCI Express Adapter
EN-9260TX-E
www.edimax.com
Copyright © 2012 Edimax Technology Co. Ltd. All rights reserved. Maximum performance, actual data rates and coverage may vary depending on network
conditions and environmental factors. Product specifications and design are subject to change without notice.