Edimax EW-7416APn v2 User manual

R
R
ang
802.11n Draft 2.0 Wireless LAN Access Point
A
cting as a bridge between the wired Ethernet and t
h
wireless LAN access point can let your wireless LAN
network nodes.
WDS Bridge Mode (Repeater Mode)
The WDS (Wireless Distributed System) function let
t
and repeater at the same time. Users can use this fe
a
space like airports, hotels and schools …etc. This fe
a
networks between buildings where it is impossible to
buildings
buildings
.
Robust Wireless LAN Security (WPA, WPA2 sup
p
Except for the basic security control by using ESSID
a
access point also supports the advanced security fea
authentication, TKIP, AES and hide ESSID. It provid
e
wireless LAN network environment that can
p
revent
f
p
Web Configuration
You can configure this access point through the frien
d
Wireless 802.11n
Et d /A Pit
EW-7416APn V2
e
E
x
t
en
d
er
/A
ccess
P
o
i
n
t
h
e 2.4GHz IEEE 802.11b/g/n wireless LAN, this
client stations access both the wired and the wireless
t
his access point acts as a wireless LAN access point
a
ture to build up a large wireless network in a large
a
ture is also useful when users want to bridge
deploy network cable connections between these
p
ort)
a
nd 64/128 bit key length WEP encryption, this
tures, like MAC access control, IEEE 802.1x
e
s a total solution for you to build up a secure
f
rom all kinds of hacker intrusion.
d
ly Web user interface with a browser.

Features
•Complies with the IEEE 802.11b/g and IEEE80
2
•Supports 2.4000~2.4835GHz frequency band.
•High data rate up to 300Mbps network speed.
Auto rate fallback in case of obstacles or interfer
•
Auto
rate
fallback
in
case
of
obstacles
or
interfer
•Supports point-to-point and point-to-multi point
b
•Supports WDS (Wireless Distributed System) re
•Supports Universal Repeater mode.
•Supports AP Client mode.
•Supports four sets of ESSID to group the differe
n
•Support WEP, WPA, WPA2 securities and RAD
I
•Supports WPS (Wi-Fi Protected Setup) function
.
•Provides MAC access control.
•Supports hidden SSID function.
•Supports Web-based configuration.
•Firmw
a
r
e
upg
r
adeab
l
e
vi
a
W
eb
b
r
o
w
se
r.
a e upg adeab e a eb b o se
Product
Wireless 802 11n Access P
Specification
Product
Wireless
802
.
11n
Access
P
SoC + RF Ralink RT3052
Flash 4 MB Flash
RAM 16 MB SDRAM
LAN Port 10/100M UTP Port x 1
Antenna Detachable 3dBi Dipole An
t
Output Power 11n: 14±1dBm, 11g: 15±1d
B
Power 5VDC, 1A Single Range S
w
Dimension 30(H) x 127(W) x 96(D) m
m
Temperature Operating: 0~40 ℃
Storage: -20~60 ℃
Humidity Operating: 10~90% (Non-C
Storage: Max. 95% (Non-C
o
Certification FCC, CE
2
.11n standards.
rences
rences
.
b
ridge function.
peater mode.
n
t wireless networks.
I
US server authorization function.
.
oint
oint
t
enna x 2 (2T2R MIMO Technology)
B
m, 11b: 17±1dBm
w
itching Power Adapte
r
m
ondensing)
o
ndensing)