Ednet 31887 User manual

6600mAh Power Bank
User Manual
31887

Introduction
Charge your iPhone®, iPad®or Smartphone On-The-Go with this
6600mAh Power Bank Charger.
It is suitable for iPhone®/iPad®/iPod®, smartphones, tablets, digital cameras,
GPS devices, Bluetooth headsets or any other portable USB device.
The 2.1A output allows fast charging of your phone or tablet and the built-in
LED torch can always come in handy Carry this power bank with you
everywhere you go and never miss that important phone call, text or email.
Suitable for
 iPhone®/iPad®/iPod®
 All smartphones including Samsung, HTC, Motorola, Nokia, LG, Sony,
BlackBerry & more
 Tablets from Samsung, Kindle, Sony & more
 GPS devices
 Portable Bluetooth devices such as headset, hands free car kit,
speaker etc.
 Portable handheld video games eBook players
Features
 Large 6600mAh is enough capacity to fully charge an iPhone®or an
average smartphone up to 3 times
 2.1A output for fast charging
 Four LED indicators to show remaining capacity
 Handy built-in LED torch
 Built-in over charging and short circuit protection

Item Specification
Capacity 6600mAh Li-ion Battery
Input Connector 1 x Micro USB female
Input DC 5V 2A
Output Connector 1 x USB Type A female
Output DC 5V 2.1A (Max)
Charging Time 5 to 6 hours
Size (L x W x H) 98 x 61 x 23mm
Weight 180g
LED Torch Operation
Press the power button for 3 seconds and the torch will turn on.
Press again for 3 seconds to turn torch off.
To Check Remaining Capacity
Press the power button and the capacity LED’s will come on.
After 10 seconds the LED’s will turn off automatically.
4 x LEDs on: 75%~100% remaining capacity
3 x LEDs on: 50%~75% remaining capacity
2 x LEDs on: 25%~50% remaining capacity
1 x LED on: less than 25% remaining capacity
To Charge Power Bank
 Using the included USB Type A to Micro USB Type B cable, connect the
larger USB Type A connector to an AC wall adapter or USB port on a
computer
 Connect the smaller Micro USB Type B connector to the Input connector
on the power bank
 During charging the LED’s will flash to show status
 When charging is complete all four LED’s will be permanently on

To Charge Mobile Phone, Tablet or Other Device
 Using your phone, tablet or other device’s charging cable, connect the
USB Type A connector to the Output connector on the power bank
 Connect the other end of the cable to your device
 Charging should commence automatically. If it doesn’t,
press the power button
 If your phone or device uses a standard Micro USB Type B connector
then you can also use the included cable to charge your device
 When your phone or device is fully charged, the power bank will
automatically turn itself off
Important Safety Instructions
 To maximize battery life span, fully charge power bank before first use for
8 to 10 hours
 Store power bank in a cool and dry place.
 Do not store power bank in hot or humid environment
 Operating temp. should be between -10 to 45
 If power bank is not used for long periods of time, you should charge and
discharge once per month
 When charging a device, the power bank may feel warm, this is a normal
operating condition and should not be cause for concern
 In normal conditions, the battery performance will
decline over several years
 Do not dispose of power bank in heat or fire
 Misuse, dropping or excessive force may cause product damage