
TELL EDUCATIONAL INSIGHTS: We welcome your comments or questions about our products or service.
CALL: (800) 995-4436 toll-free Monday–Friday
WRITE TO: Educational Insights Customer Service, 2206 Oakland Parkway,Columbia, TN 38401-9901 (USA)
©2006 Educational Insights, Inc., Rancho Dominguez, CA 90220 (USA). All rights reserved. Made in China.
Conforms to ASTM F 963. Please retain this information.
6. Insert 4 more short poles (item # 01) into the top of
the plastic brackets (item #03) on Tier 2. Fit the
remaining 2 brackets on top of these. See Figure 4.
7. Fit the two angled poles (item #06) into the holes in
the top brackets. Take the thin wire (item #07) and
fit the ends into the holes in the middle of the
angled poles. See Figure 5.
8. Lay the two shelves (item #05) onto the long poles
on Tiers 1 and 2 so that the curved fronts and backs
slide over the poles. See Figure 6.
9. Slide the plastic greenhouse cover (item #04) over
the structure and tie it to the four poles at the
bottom to secure it in place. See Figure 7.
10. Your greenhouse is now ready to use!
Caution
Avoid puncturing the greenhouse plastic with sharp objects.
Never use your greenhouse near a fire.
Suggested Placement
It’s best to place your greenhouse where it will get maximum sunlight – on the south
or southeast side of a building. Sunlight all day is most desirable; but if you must
choose, morning sunlight (east side location) is preferred so as to allow a plant’s
food production process to begin early. Placing the greenhouse on the north side of
abuilding or shady area is best for plants that require little light.
Figure 4
Figure 5
Figure 6
Figure 7