Efficient Networks SpeedStream 5667 User manual

Quick-Start Guide
®
SpeedStream 5667
USB/Ethernet DSL Modem

Before you begin:
Verify that the following items came with your DSL kit:
Documentation Software CD-ROM
USB/Ethernet
DSL Modem
USB cable RJ-11 DSL cable RJ-45 Straight-through
Ethernet cable
RJ-45 Crossover
(Xover) Ethernet cable
Line filter(s)
PCI Ethernet adapter Wall-mount line filter
Power supply
SpeedStream®
Safety andCertifications
xxxx
SpeedStream®
Safety andCertifications
xxxx
If you are installing the modem to use your USB port, you will need to provide your CD-ROM drive letter
during software installation. To find the drive letter, double-click the My Computer icon on your desktop.
Look for the CD icon and note the letter next to it. This letter is your CD-ROM drive letter.
Two-to-one adapter(s)
Your service provider may include a wall-mount filter, two-to-one adapter(s), line filter(s), and an Ethernet
adapter in your DSL kit. If you received any of these items, follow the instructions provided in this guide for
basic installation. If you need further assistance installing these items, please contact your service provider.
SpeedStream®

Install Line Filters
Step
Step
Two-to-One Adapter
Devices such as fax machines, caller ID boxes, or phones that share the same phone number as your DSL
account require a line filter, which prevents modem noise from disrupting the DSL signal on the phone line.
Filters can be in the form of a stand-alone line filter or a wall mount filter. A filter can also be plugged into
a two-to-one adapter if your DSL modem will share the same phone jack with another device.
If your DSL modem and another device will share the same phone jack, install a two-to-one adapter:
1. Plug adapter into the phone jack.
2. Plug a line filter into one of the sockets of
 the two-to-one adapter. The other socket will
 be used to connect the DSL cable.
3. Plug the telephone (or other device) cord
 into the line filter.
For each device that shares the DSL phone number:
1. Unplug the device’s cord from the phone jack.
2. Plug the filter into the phone jack.
3.  Plug the phone cord (or other device cord)
into the filter.
Stand-alone Line Filter
1
Wall Mount Filter
23
For a wall mount phone, install a wall mount filter:
1. Remove the phone.
2. Connect the wall mount filter to the wall plate.
3. Reconnect the phone.
1
1
2
3
2
3
1

2Choose an Installation Method
Step
Step
Connect the DSL modem
DSLRESETUSBCONSOLE10BASE-T PWRPWR-
RJ-11 DSL cable
Install Ethernet adapter
You will need to install an Ethernet adapter if your computer does not already have one installed.
Refer to your Ethernet adapter manufacturer’s documentation for complete installation instructions.
Congratulations! You have completed the installation of your SpeedStream
® hardware.
There is no modem software installation required when using the Ethernet connection method.
Refer to your Internet Service Provider’s instructions for installing their software and/or connecting to the Internet.
Ethernet Installation Method
2A:
1. With your computer off, connect the Ethernet cable to the Ethernet port on the modem.
2. Connect the other end of the Ethernet cable to the Ethernet port on your computer.
3.  Plug the DSL cable into the DSL port on the modem.
4. Plug the other end of the DSL cable into the phone jack.
4a. If using a two-to-one adapter, plug the cable into the open socket.
5. Plug the power adapter into the power outlet and modem.
6.  Power on the computer. Power on the Modem.
2
Hub
Optional:
Use Crossover (Xover) cable
when connecting to a hub or
switch without an “Uplink” port
Power Supply
Internet Connection
Internet Connection
w/two-to-one adapter
1
3
4
4a
5
Ethernet Connection
to computer RJ-45
Straight-through
Ethernet cable

DSL RESET USB CONSOLE10BASE-T PWRPWR-
RJ-11 DSL cable
Power Supply
Internet Connection
Internet Connection
w/two-to-one adapter
3
4
4a
5
USB Installation Method
Congratulations! You have completed the installation of your SpeedStream®DSL modem
Refer to your Internet Service Provider’s instructions for installing their software and/or connecting to the Internet.
1. Connect the USB Cable to the USB port at the rear of the modem.
2. Connect the other end to the USB port on your computer.
3.  Plug the DSL cable into the DSL port on the modem.
4. Plug the other end of the cable into the phone jack.
4a. If using a two-to-one adapter, plug the cable into the open
 socket, which should already be connected to the phone jack.
5. Plug the power adapter into the power outlet and modem.
2B:
Connect the DSL modem
1
USB Connection
to computer
2
1. Insert the SpeedStream®Installation CD into your CD-ROM drive.
2. Click the “Start” button on the Windows taskbar.
3. Select “Run” from the Start menu.
4. Type “e:\ setup.exe” where “e” represents your CD-ROM drive.
Note your drive letter may not be "e."
5. Click the “OK” button.
6. The software installation program will start. Follow the on-screen directions to complete the
 software installation. When prompted to attach the modem, please refer to the instructions below.
Before installing the software, make sure your PC is equipped with the following.
Note that the DSL software is not installable on Macintosh®computers.
 • Windows®98, 98 SE, 2000 Professional, and Me®
 • 32 MB RAM
 • Pentium-compatible 233 MHz processor
 • 10 MB available hard disk space
Software Installation

For more information about Efficient Networks, please visit our website www.efficient.com
©2001 Efficient Networks, Inc. All rights reser ved. Efficient Networks, its logos, and SpeedStream
are registered and unregistered trademarks of Efficient Networks, Inc. All other brand names and
trademarks are held by their respective companies. Efficient Networks reserves the right to make
changes to product specifications at any time without notice.
Unlit
Solid
Blinking
power
Power Off
Power On
N/A
act
N/A
N/A
DSL traffic flow
eth
Ethernet port not
connected; check Ethernet
cable connection if using
Ethernet interface
Ethernet port connected
to LAN
Ethernet traffic flow
adsl
N/A
Ready for data
traffic
Searching for signal
usb
USB port not
connected; check USB
cable connection if
using USB interface
USB port connected
to host
Traffic flow on the
USB interface
Troubleshooting
Step
Step 3
adsl
power
acteth
usb
Corporate Headquarters
4849 Alpha Road
Dallas, Texas 75244
1+972-852-1000 PHONE
1+972-852-1001 FAX
[e-mail] EMAIL