Egholm Park Ranger 2150 User manual

Operator´s
manual
Basic machine
Park Ranger 2150

2Operator’s Manual Park Ranger 2150 Operator’s Manual Park Ranger 2150
Introduction
Dear Customer
Congratulations with your Egholm product
The Park Ranger 2150 offers a very exible way of maintaining outdoor areas.
Optimal use of your Park Ranger 2150
To ensure optimal performance of your Park Ranger 2150, please read this manual carefully before
using the machine. Failure to do so can result in personal injury and damage to the machine.
Safety
The Park Ranger 2150 is equipped with various devices to ensure optimal operational safety both
for the user and their surroundings. We ask you to pay particular attention to section 1.1. Safety.
The machine must only be serviced by professionals.
The Park Ranger 2150 is designed only for use by professionals. On delivery, the user will
receive thorough training to become a competent operator.
Do not lend it to anyone who has not been thoroughly trained and who has not read this manual
carefully.
The operator’s manual should be considered a permanent part of the machine and must remain
with the machine if sold.
Warnings
Some items in this operator’s manual are marked with this warning symbol.
The warning indicates areas where extra care has to be taken to avoid personal injury or
damage to the machine and its accessories. The warning also shows what you should
pay special attention to.
Reservations
As it is the Egholm policy to make continuous improvements, we reserve the right to alter the
specications and equipment at any time without notice. Egholm accepts no liability for errors or
omissions in the operator’s manual.
Contact us
Should you have questions of any kind regarding your Egholm product, please do not hesitate to
contact Egholm.
Best regards
Egholm A/S · Transportvej 27 · DK-7620 Lemvig
T. [phone] · F. [phone]
E-mail: [e-mail] · www.egholm.eu

3Operator’s Manual Park Ranger 2150 Operator’s Manual Park Ranger 2150
Contents
Introduction .................................................................................5
General information ..........................................................................7
1.1 Safety ................................................................................7
1.2 Attachments ..........................................................................9
1.3 EC Declaration of Conformity ..........................................................10
1.4 Technical data ........................................................................11
1.5 Access to the cab .....................................................................14
1.6 Steering column ......................................................................16
1.7 Operational features ..................................................................20
1.8 Operating panel, cab ..................................................................24
1.9 Removable load carrier (optional) .......................................................25
1.10 Driver’s seat .........................................................................26
1.11 Oil cooler cover ......................................................................28
1.12 Fuses and main switch ................................................................29
1.13 Fuses and relay overview Fuse / relay overview in the steering column .....................30
Operator’s manual ..........................................................................33
2.1 Daily checks before start-up ...........................................................33
2.2 Starting, operating and stopping .......................................................35
2.2 Starting, operating and stopping .......................................................36
2.3 Trailer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
Service and Maintenance ....................................................................42
3.1 Daily maintenance ....................................................................42
3.2 Lubrication ...........................................................................43
3.3 Park Ranger 2150 service and maintenance chart .......................................44
3.4 Hydraulic system .....................................................................46
3.5 Engine maintenance ..................................................................47
3.6 Fuel .................................................................................49
3.7 Radiator .............................................................................51
3.8 Air lter ..............................................................................52
3.9 Windscreen washer liquid ..............................................................52
3.10 Battery ..............................................................................53
3.11 Fan belt .............................................................................54
3.12 Articulated joint ......................................................................54
3.13 Towing ..............................................................................55
3.14 Transporting the Park Ranger 2150 ....................................................56
3.15 Tire change .........................................................................57
3.16 Checking for worn brakes .............................................................58
Conditions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60
4.1 Warranty .............................................................................60
4.2 Complaints ...........................................................................61
4.3 Disposal .............................................................................61
Wearing parts ...............................................................................63
5.1 Wearing parts – Park Ranger 2150 .....................................................63
Notes .....................................................................................65

Introduction

5
Operator’s Manual Park Ranger 2150
The Park Ranger 2150 utility machine
The Park Ranger 2150 is an Egholm utility machine with a complete range of special attachments designed
to allow you to perform outdoor maintenance work all year round. Sweeping and vacuuming in spring and
autumn, mowing grass and lawn-edge cutting in the summer, and sweeping snow, and spreading gravel and
sand in the winter.
Easy attachment changeover
Attachments can be changed quickly and easily in less than four minutes.
Publication
This manual is made in accordance with the requirements in standard ISO 3600:1996.
To order this manual please refer to this item number E97200000. This manual applies only to the
Egholm Park Ranger 2150 C1.
Introduction

General information

7
Ophold i knækområdet
er forbudt
Aufenthalt im Knickbereich ist verboten
Activities around the articulation point is forbidden
Ne séjournez jamais dans la zone d’articulation
2
3
4
1
Operator’s Manual Park Ranger 2150
1.1 Safety
Make sure no-one is standing close
to the machine while it is in use
Make sure that no one is near the
machine while it is in use as there is a
danger of crushing.
NB
As it is articulated, the rear end of the
machine swings out when turning.
Make sure that no one is standing
near the machine while it is in use.
(Picture 1)
Turn the steering wheel carefully
The Park Ranger 2150 is articulated
and the steering mechanism is
extremely responsive. (Picture 2)
Avoid accidents with battery acid
and gases
Batteries contain explosive gases and
acid. Please take the greatest care
when handling batteries. (Picture 3)
Avoid accidents with exhaust fumes
Exhaust fumes can cause illness or
even death. If the engine is to run
in an enclosed room, the exhaust
fumes must be led outside – using an
exhaust hose, for example. If there is
no ventilation system in the room, the
doors and windows must be left open
to allow fresh air to enter.
Avoid roll-overs
Do not drive the machine in places
where there is a risk that it may slide,
tip or roll. Do not drive on slopes with
an incline of more than 10°. (Picture 4)
Keep children away from the machine when the
engine is running
Battery
Prevent people from standing in the
working area
Articulated joint
Do not drive on slopes with an incline of
more than 10°
General information
Max. 10°

8
2
3
1
Operator’s Manual Park Ranger 2150 Operator’s Manual Park Ranger 2150
1.1 Safety - continued
Avoid crushing ngers
Keep your hands and ngers away from areas where
there is a danger of crushing.
The A-frame
Take care not to catch your ngers in the A-frame for
the various attachments. (Picture 1)
Exhaust pipe
Make sure not to touch the exhaust pipe as this
becomes very hot when the machine is operating.
(Picture 2)
The Engine
Caution! All components in the Engine can become
very hot!
Fan belt
Make sure not to catch your ngers in the fan or the
fan belt. (Picture 2)
Avoid damage to your hearing
Always wear approved ear protectors when
using the machine. (Picture 3)
Other hazards
There may be other circumstances and
situations than those mentioned above
where it may be dangerous to use the Park
Ranger 2150.
Maintenance
Before carrying out servicing and
maintenance please make sure to pull the
hand brake, stop the engine and turn off
the main switch of the machine.
Protection against lightning strike
The driver is protected from lightning
strikes inside the cabin.
The cabin works like a Faraday cage.
Keep the windows closed and make sure
you put
your hands close to your body.
Do not touch ttings or any metal parts.
Avoid crushing ngers
Exhaust pipe Fan belt
General information
Use approved hearing protection

9Operator’s Manual Park Ranger 2150 Operator’s Manual Park Ranger 2150
1.2 Attachments
Park Ranger 2150 is designed to work with the following attachments, using other attachments -
pay attention to maximum total and axle load - see page 11 point 1.4:
Attachments Type
Suction Sweeper - Front brushes FK22150
Suction Sweeper - Third brush HS1
Suction Sweeper - Front brush incl. Third brush FK32150
Suction Sweeper - Hopper FS2150
Suction Sweeper - Hopper FS2150 II
Mulch Mower 1200 LM1200
Mulch and Rotary Mower 1000 LM1000
Rotary Mower for Grass Collecting 1000 LMC1000
Hopper for Grass Collecting GC500
Lawn Edger 22VKS1
Flail Mower / Verticutter 21SLK
Leaf Suction Unit LS100U
Hedge Trimmer HK 1300 MINI / 2200
Tipping Shovel VS200
Tipper Trailer ST2150
All Purpose Tipper Trailer TV600
Enviromental rake MR1100
Load carrier ST2150
Snow Sweeper 21SK1205
Dozer blade 21DZ1305
Snow V-blade FS1300VLE
Snow Blower SN100
Salt and Sand Spreader 2150SG
Weed brush UB 1
There is an operator’s manual for each attachment.
Operation with these attachments must follow the instructions outlined in the relevant operator’s
manual. Do not operate the Park Ranger 2150 with the attachment unless all instructions have been
followed.
General information

10 Operator’s Manual Park Ranger 2150 Operator’s Manual Park Ranger 2150
1.3 EC Declaration of Conformity
Manufacturer: Egholm A/S
Address: Transportvej 27 · DK-7620 Lemvig
Telephone: [phone]
hereby declares that
The machine: Park Ranger 2150 C1
Type: UHM 2150 C1 XX (year of manufacture) A XXXXX (serial number)
has been manufactured in conformity with the provisions of Regulation (EU) 167/2013 and
Directive 2006/42/EC
Any alteration, rebuilding or addition of implements, accessories or other equipment not
manufactured by Egholm automatically results in the cancellation of type approval, CE approval,
any other approval, as well as any warranty on machine and attachments.
Unless otherwise agreed in writing between the operator, customer and Egholm, Egholm is the
data originator (data originator) of all data generated by the machine and attachments during use.
Person authorized to compile the technical documentation:
Rainer Flanz
Egholm A/S
Transportvej 27
7620 Lemvig
Place: Lemvig
Date:
Signature:
Rainer Flanz, R&D Manager
General information

11Operator’s Manual Park Ranger 2150 Operator’s Manual Park Ranger 2150
1.4 Technical data
Dimensions
Length (L) ................................................................2,225 mm
Width (W) ................................................................1,015 mm
Height with cab ...........................................................1,935 mm
Height without cab ........................................................1,210 mm
Max. speed ................................................................ 16 km/h
Weight
Weight ......................................................................664 kg
Max. permitted weight for:Utility machine ..................................... 1,300 kg
Machine and trailer without brakes ............................................1,750 kg
Machine and trailer with overrunning brakes ..................................2,650 kg
Trailer without brakes .........................................................750 kg
Trailer with overrunning brakes .............................................. 1,500 kg
Permitted axle load, front .....................................................740 kg
Permitted axle load, rear ......................................................740 kg
Tyres
Tire size ............................................................ 18 x 9.5-8 74 A4
Tire pressure ........................................................1.6 bar or 24 psi
Engine
Type/manufacturer ....................................................Perkins Diesel
Type .......................................................................403J-11
Engine power ............................................25,7Hk - 18,9kW at 2800 rpm
Cylinders .........................................................................3
EU Norm ...................................................................Stage V
Please refer to the engine operator’s manual for additional technical data
Fuel
Fuel ..........................................................................Diesel
Fuel tank capacity .........................................................20 l diesel
At 2,400 rpm ..........................................................approx. 2.8 l/h
At 2,800 rpm ..........................................................approx. 3.6 l/h
General information

12 Operator’s Manual Park Ranger 2150 Operator’s Manual Park Ranger 2150
General information
1.4 Technical data - continued
Lubricating system
Lubricating system ..................................... Pressure-lubricating system with lter
Lubricants Engine oil: ............approx. 3 l, synthetic 10W-30 API: CK-4, CJ-4, CI-4, CI-4 PLUS, SN
Air lter .......................................................Dry, replaceable element lter
Cooling system ..............................................................Liquid coolant
Electrical system
Starter system ................................................Electric starter with glow plugs
Charging system .................................................................Generator
Charging capacity ...........................................................12 volt, 65 amp
Battery ......................................................................12 Volt, 44 AH
Hydraulic oil
Hydraulic oil, type .....................................................Texaco Rando HDZ 68
Tank capacity ..........................................................................15 l
Working pressure .............................................................Up to 225 bar
Brakes
Operating brakes ............................................................... Hydrostatic
Parking brakes ................................................................. Mechanical
Sound measurements
Running, CR(EU) No. 1322/2014. ann. VIII - 2018/830 .................................76 dB(A)
Pass-by, CR(EU) No. 1322/2014. ann. VIII - 2018/830 .................................75 dB(A)
Machine operator position, open windows, CR(EU) 2018/895 ..........................80 dB(A)
Machine operator position, closed windows, CR(EU) 2018/895 .........................83 dB(A)
Vibration test
Whole body, EN 13059 .................................................................................0.6 m/s2
Hand/arm, EN 13059 ................................................................................. 2.4 m/s2
Turning radius
Park Ranger 2150 has an extremely small turning radius .................................1.5 m
Information plate ................................ Mounted on the right side of the front chassis
Attention
Specications may change without notice.

13Operator’s Manual Park Ranger 2150 Operator’s Manual Park Ranger 2150
1.4 Technical data - continued
Cab
Falling Object Protective Structure - FOPS
Park Ranger 2150 and its attachments do not operate when falling objects are a risk.
Roll-Over Protective Structure - ROPS
Tested according to Directive 86/298/EEC and fullls OECD Code 7.
Contact with harmful and unhealthy substances
The classication of the cab is according to EN 15695-1 Category 1.
This type of cab does not protect you from harmful and unhealthy substances.
Park Ranger 2150 can NOT be used in environments, which require protection of the driver against
harmful and unhealthy substances.
Park Ranger 2150 electrical diagram and hydraulic diagram can be obtained by contacting
Egholm authorized dealer
General information

14
1
2
3
Operator’s Manual Park Ranger 2150 Operator’s Manual Park Ranger 2150
1.5 Access to the cab
Access
Access to the cab is from the right and left side
door. The doors will open when you press the
door handle button. (Picture 1)
To enter the cab, simply step directly in.
(Picture 2)
To leave the cab, open the door with the inside
door handle. The doors will open when you press
the door handle down. (Picture 3)
Both doors can be used as an emergency exit.
Outside door handle button
Cab oor
Inside door handle - Press down
General information

15
2
3
4
1
5
Operator’s Manual Park Ranger 2150 Operator’s Manual Park Ranger 2150
1.5 Access to the cab - continued
Opening the window
To open the window pull the small window button
outwards and pull back the window handle.
(Picture 1+2)
Roof hatch
The cab is equipped with a roof hatch. The
roof hatch will open when you push the handle
upwards. (Picture 3)
Safetybelt (Picture 4)
Handles for entering the machine (Picture 5)
Pull out small button
Roof hatch handle
Pull back handle for window to open
General information
Safety belt
Handles for entering the machine

16
2 31
1
Operator’s Manual Park Ranger 2150 Operator’s Manual Park Ranger 2150
1.6 Steering column
Steering column
1. 12V Connector.
2. Horn switch.
3. Ignition key.
General information

17
64 75
1
8
Operator’s Manual Park Ranger 2150 Operator’s Manual Park Ranger 2150
1.6 Steering column - continued
4. Hazard lights.
5. Instrument panel switch to switch between rpm and the timer.
6. Warning steering pressure failure.
7. Instrument panel.
8. Switch - electrical socket rear.
General information

18
7
8
6
9
10
1211
2
3
1
4
5
1
Operator’s Manual Park Ranger 2150 Operator’s Manual Park Ranger 2150
General information
1.6 Steering column - continued
Instrument panel
1. Indicator light - Green LED.
Left and right indicator light.
2. Oil alarm - Red LED.
Stop driving, stop the engine immediately and
check the oil level.
Top up immediately if the oil level is low.
3. Temperature alarm - Red LED.
Indicates that the engine temperature is too
high. Switch off all attachments and let the
engine run on half-power (rpm) for approx. 2
minutes. If necessary, clean the radiator cover.
4. Hydraulic oil - Red LED.
Hydraulic oil level is too low: Hydraulic oil is
required. Note that the alarm device may be
activated when the temperature falls to under
+5 °C.
Check the oil level. If this is OK, restart the
machine. The alarm must deactivate after 15
seconds.
5. Fuel tank indicator - Red LED.
Lights up when there is less than ve litres of
fuel left in the tank. Enough for about 1½ hour
drive.
6. Indicator for trailer - Green LED.
Left and right indicator light for trailer.
7. Headlight indicator - Green LED.
8. Charging light - Red LED.
Normally lights on ignition or when the engine
starts. If the light stays on, stop the engine and
nd the cause. Check the generator belt.
9. Handbrake indicator - Red LED.
10. Pre-heater - Orange LED.
The pre-heater light is activated when the
ignition key is turned, showing that the engine
pre-heater is on. When the light goes out, the
ignition key can be turned all the way to start the
Park Ranger 2150.
11. Shows rpm or time (h).
12. Time/rpm/speed counter. Time shown on
start-up. Switches automatically over to show
rpm.
Sound alarm activates in case of 3 and 4

19
2 31 4
1
Operator’s Manual Park Ranger 2150 Operator’s Manual Park Ranger 2150
Steering column
1. Throttle.
2. Handbrake.
3. Indicator light switch/stalk.
4. Fuses. See section 1.13.
1.6 Steering column - continued
General information

20
1
C1
A B C
B1B2
C2
2
3
1
Operator’s Manual Park Ranger 2150 Operator’s Manual Park Ranger 2150
1.7 Operational features
1. Lever A
For raising and lowering front-mounted
attachments on the A-frame: (Picture 1)
Top position: Raises the attachment.
Middle position: Locks the attachment in a
given position.
Bottom position: Lowers the attachment.
2. Lever B
Activation of hydraulic connectors B1 and B2 –
for attachments. (Picture 1)
Pos. 1: Locked – oil ow activated =
attachment operating.
Pos. 0: Neutral (depends on the attachment).
Pos. 2: The attachment operates in the reverse
direction.
3. Lever C
Activation of hydraulic connectors C1 and C2 for
rear-mounted attachments: (Pictures 1+2+3)
Pos. 1: Raises/tilts the attachment
(depends on the attachment).
Lever C can be locked in pos. 1 by using
the locking handle. This function must
be used during work with the salt and
sand spreader.
Pos. 0: Neutral (depends on the attachment).
Levers A, B, C Hydraulic connectors B1, B2
Locking handle for lever C
Hydraulic connectors C1, C2
General information