6
• Do not exceed a maximum loading of 2400 watts.
• For safety reasons, always use earth connections.
• Only use the powerboard with the power supply cord
fully unwound.
• Before installing the powerboard, make sure to place it away
from: heatsources, radiators or other products that produce heat;
areas with high temperatures, high humidity or direct sunlight;
excess dirt and dust; open windows and any place where water
may get to the unit.
• Do not immerse the cord, plug or the surge powerboard in water
or other liquid, or expose the electrical connections to water or
other liquid.
• Unpack the powerboard and keep the original packaging carton
and materials in a safe place. It will help prevent any damage if
the powerboard needs to be transported in the future, and you
can use it to store the powerboard when it is not in use.
• The powerboard should always be repacked in its original pack
aging whenever transporting to prevent any possible damage to
the product.
• When not in use: Disconnect from the power source and store in
a cool, dry and well ventilated location out of direct sunlight, and
not subject to humidity.
• Discard this powerboard if the supply cord is damaged.
