Elcom Wonder series User manual

Wonder Series

W-615

Version 1.0

User Manual

www.elcom.eu

About this Manual

Thank you for purchasing Wonder Series Touch Terminal. This terminal offers highly enhanced

features, with easy connection to various optional devices for optimal performance. This user

manual describes how to setup and connect your terminal.

are distributed under licenses restricting their use, copying, and distribution. No part of this

documentation may be reproduced in any form by any means without prior written authorization of

the manufacturer and its licensors, if any.

Safety Information

Before you Proceed:

• Read the safety notices and the User Manual carefully before using the product.

• Keep the box and packaging in case the product needs to be shipped in the future.

• Follow the product and warning label instructions.

• Any changes or modications that do not follow the instructions in this manual will void this

product’s warranty.

Power Supply Safety Notes:

• To avoid electric shocks, disconnect the power cord from the electrical outlet before

relocating the system.

• Make sure the voltage of the power outlet conforms within voltage range of the terminal.

Failure to comply may cause the electric shock or damage to the terminal. If you are not

sure of the electricity voltage that you are using, consult your local electricity company.

• To avoid re or electric shocks, do not overload electric power outlets.

• Protect the power cord from being walked on or pinched particularly at plug, convenience

receptacles, and the point where they exit from the apparatus.

Operating Instructions

• Keep this manual for future reference.

• Keep this equipment from moisture and dust.

• Place the equipment on a stable surface before setting it up.

About this Manual

Thank you for purchasing Wonder Series Touch Terminal. This terminal offers highly enhanced

features, with easy connection to various optional devices for optimal performance. This user

manual describes how to setup and connect your terminal.

are distributed under licenses restricting their use, copying, and distribution. No part of this

documentation may be reproduced in any form by any means without prior written authorization of

the manufacturer and its licensors, if any.

Safety Information

Before you Proceed:

• Read the safety notices and the User Manual carefully before using the product.

• Keep the box and packaging in case the product needs to be shipped in the future.

• Follow the product and warning label instructions.

• Any changes or modications that do not follow the instructions in this manual will void this

product’s warranty.

Power Supply Safety Notes:

• To avoid electric shocks, disconnect the power cord from the electrical outlet before

relocating the system.

• Make sure the voltage of the power outlet conforms within voltage range of the terminal.

Failure to comply may cause the electric shock or damage to the terminal. If you are not

sure of the electricity voltage that you are using, consult your local electricity company.

• To avoid re or electric shocks, do not overload electric power outlets.

• Protect the power cord from being walked on or pinched particularly at plug, convenience

receptacles, and the point where they exit from the apparatus.

Operating Instructions

• Keep this manual for future reference.

• Keep this equipment from moisture and dust.

• Place the equipment on a stable surface before setting it up.

• If there is any of the following situation arise, notify a qualied service technician

immediately:

◊The power cord or plug is damaged.

◊Liquid has been spilt on to the equipment.

◊The equipment has been dropped and damaged.

◊The equipment does not function normally.

• Do not block any ventilation openings to prevent the equipment from overheat.

• Do not leave the equipment in a non air-conditioned environment where the storage

temperature may go above 70°C (158°F), as this can cause damage to the equipment.

Maintenance

• Gently wipe screen with a clean soft hair lens brush, or a lint-free cloth.

• Do not apply pressure to the screen while cleaning.

• Do not spray any liquid directly onto the screen or the casing of the terminal.

• Chemical cleaners have been reported to cause damage on the screen of the terminal.

Warning and Attention

• The technical descriptions and specications of the equipment are subject to change without

notice.

• For safety reasons, wear gloves when assembling the product.

• Risk of explosion if battery is replaced by an incorrect type.

• Dispose of used batteries according to the instructions.

Patent

Patent pending.

CE Statement

• A Class III equipment with an enclosure made of HB material and using a non-special

connector for the a.c./d.c. input has to have a marking stating the following: “Use only

power supplies listed in the user instructions” or “For applicable power supplies see user

instructions”. This statement shall also be in the user-instructions.

• If product with laser module, the class of laser should be mentioned. The warning as

attachment.

Federal Communications (FCC Statement)

This device complies with FCC Rules Part 15. Operation is subject to the following two conditions:

• This device may not cause harmful interference.

• This device must accept any interference received including interference that may cause

undesirable operation.

This equipment has been tested and found to comply within the limit of a Class A digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This

equipment generates, uses and can radiate radio frequency energy and, if not installed and

used in accordance with the manufacturer’s instructions, may cause harmful interference to

radio communications. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or television

reception, which can be determined by switching the equipment on and off, the user is

encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the interference receiving antenna.

• Increase the distance of separation between the equipment and interference receiver.

• Connect the equipment to a power outlet on a circuit different from that to which the

interference receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Warning

The use of shielded cables for connection of the monitor to the graphics card is required to assure

compliance with FCC regulations. Changes or modications to this unit not expressly approved by

the party responsible for compliance could void the user’s authority to operate this equipment.