Eldes EWD3 User manual

WIRELESS MAGNETIC DOOR CONTACT/
SHOCK SENSOR/FLOOD SENSORREADY
EWD3
USER GUIDE V1.1
LT DE
EN RU

LT
DE
PAGRINDINĖS SAVYBĖS
• Iin ilga baterijos tarnavimo trukmė
• Magneinis durų kontaktas
• Įmontuotas tamperio jungiklis sabotažo apikimui
• Išorinis NO/NC juiklis arba EOL juiklis
• Įmontuotas smūgio juiklis
• Išorinis vandens lygio juiklis (EFS1 prekiaujama atskirai)
• Vidinis temperatūros juiklis
• LED indikacija
EWD3 - tai belaidis įrenginys, skirtas saugoi duris, langus ir kitus atsidarančius/užsidarančius mechanizmus. Papildomai įrengi-
nys turi savyje įmontuotą smūgio juiklį, laidinės zonos kontaktą bei tamperio jungiklį EWD3 sabotažo apikimui.
HAUPTMERKMALE
• Super-lange Baterielebensdauer
• Magneischer Türkontakt
• Eingebauter Sabotagekontakt
• Externer NO/NC Sensor oder EOL Sensor
• Eingebauter Schocksensor
• Überschwemmungssensor (EFS1 wird separat verkaut)
• Eigener Temperatursensor
• LED Indikaion
EWD3 ist ein Funkgerät, das entwickelt wurde, um Türen, Fenster oder jegliche sonsige Öfnungs-/Schließmechanismen zu si-
chern. Außerdem verfügt das Gerät über einen eingebauten Schocksensor, eine eigene Zonen-Klemme und einen eingebauten
Sabotagekontakt für die EWD3-Sabotagedetekion.
EN
RU
MAIN FEATURES
• Super long batery lifeime
• Magneic door contact
• Built-in tamper switch for sabotage detecion
• External NO/NC sensor or EOL sensor
• Built-in shock sensor
• External lood sensor (EFS1 sold separately)
• On-board temperature sensor
• LED indicaion
EWD3 is a wireless device intended to secure doors, windows or any other opening/closing mechanisms. In addiion, the device
comes equipped with a built-in shock sensor, an on-board zone and a built-in tamper switch for EWD3 sabotage detecion.
•
•
•
• NO/NC EOL
•
• (EFS1 )
•
• LED
EWD3 - , , /
. , , -
EWD3.

3
EWD3 WIRELESS MAGNETIC DOOR CONTACT/SHOCK SENSOR/FLOOD SENSOR-READY
MIN
-20°C(-4°F)
MAX
+55°C(+131°F)
RU
INSTALLATION
EN MONTAVIMAS
LT INSTALLATION
DE
EN CONTENTS OF PACK RU LT PAKUOTĖS SUDĖTIS DE INHALT DER PACKUNG
1 x
4 x
1 x
1 x
1 x
2 x 1 x
1 x

4EWD3 WIRELESS MAGNETIC DOOR CONTACT/SHOCK SENSOR/FLOOD SENSOR-READY
1 2
3A 3B
TAMPER

5
EWD3 WIRELESS MAGNETIC DOOR CONTACT/SHOCK SENSOR/FLOOD SENSOR-READY
4 5
6
Magnet
NO COM
Z
COM
5,6kΩ
NC COM
Magnet
Z
COM 5,6 kΩ
COM Z
+-
EOL NO/NC

6EWD3 WIRELESS MAGNETIC DOOR CONTACT/SHOCK SENSOR/FLOOD SENSOR-READY
8
10
9
7
Xy/2
Xy/2
Y
+-

7
EWD3 WIRELESS MAGNETIC DOOR CONTACT/SHOCK SENSOR/FLOOD SENSOR-READY
10
11A
Xz/2
Xz/2
Z
Xy, mm
(inch)
Y, mm
(inch)
Xz, mm
(inch)
Z, mm
(inch)
Wood/
/
Mediena/
Holz
15 (0,59) 30 (1,18) 20 (0,79) 30 (1,18)
Metal/
/
Metalas/
Metall
10 (0,39) 15 (0,59) 10 (0,39) 10 (0,39)

8EWD3 WIRELESS MAGNETIC DOOR CONTACT/SHOCK SENSOR/FLOOD SENSOR-READY
1211B
ELDES
coniguraion
sotware

9
EWD3 WIRELESS MAGNETIC DOOR CONTACT/SHOCK SENSOR/FLOOD SENSOR-READY
EN
1 . GENERAL OPERATIONAL DESCRIPTION
EWD3 is a wireless device intended to secure doors, windows or any other opening/closing mechanisms. In addiion, the device comes equipped
with a built-in shock sensor for vibraion detecion (drilling, knocking, hammering etc.), an on-board zone terminal designed for external NO/NC
sensor, EOL (end-of-line) sensor (for double-leaf door or 2nd window security) or lood sensor (for water leak detecion) connecion and a tamper
switch for enclosure state supervision in case it is illegally opened or detached from the wall. In order to start using EWD3, it has to be paired with
ELDES alarm system using ELDES coniguraion sotware or by sending a corresponding SMS text message to ELDES alarm system.
PITBULL ALARM and PITBULL ALARM PRO alarm systems support up to 16 EWD3 devices, while ESIM364 and ESIM384 - up to 32 EWD3
devices. The maximum wireless connecion range is 3000m (~9843t) (in open areas).
DESCRIPTION
DETECTOR Hall efect sensor
/ Batery slots
RESET Buton for restoring default parameters
COM Common terminal
Z Zone terminal
LED Light-emiing diode for status indicaion
TAMPER Tamper switch
FRONT
DETECTOR
DETECTOR
LED

10 EN EWD3 WIRELESS MAGNETIC DOOR CONTACT/SHOCK SENSOR/FLOOD SENSOR-READY
BACK
RESET Z
COM
TAMPER
+-
RESET Z
COM
2 CONFIGURING AND PAIRING WITH THE SYSTEM
ELDES
coniguraion
sotware
For more details on how to conigure and pair the device with the system, please refer to ELDES coniguraion
sotware’s documentaion or ELDES alarm system’s installaion/user manual located at eldesalarms.com
Once the 5-second period ater the batery acivaion has passed, EWD3 device will start indicaing the pairing status. Single long lash
of the indicator (approx. 1 sec. length) represents the unpaired wireless device status suggesing the device can be paired with the alarm
system, while the 3 short lashes represent the wireless device that is paired with the alarm system.
If you are unable to pair the wireless device, please restore the parameters of the wireless device to default and try again (see 7.
RESTORING DEFAULT PARAMETERS for more details.)
3. EWD3 ZONES AND TAMPER
Upon successful EWD3 device pairing process, the system adds 2 wireless Instant-type zones. The wireless zones can be set up to operate under one of
the following modes each:
Zone 1:
• Magneic door contact – Designed for causing an alarm (by default) if doors/windows are opened, while the system is armed.
• NO/NC sensor – Designed for causing an alarm (by default) if the wired digital sensor, connected to Z and COM terminals, is triggered, while the system
is armed. This mode does NOT operate with Flood sensor mode on Zone 2 simultaneously.
• EOL sensor – Designed for causing an alarm if the wired sensor with EOL resistor, connected to Z and COM terminal, is triggered.
Zone 2:
• Shock sensor – Designed for causing an alarm (by default) if the built-in shock sensor is triggered by vibraions.
• Flood sensor – Designed for causing an alarm (by default) if a lood sensor EFS1, connected to Z and COM terminals, is triggered when in physical
contact with water.
• NO/NC sensor – Designed for causing an alarm (by default) if the wired digital sensor, connected to Z and COM terminals, is triggered, while the system
is armed.
• EOL sensor – Designed for causing an alarm if the wired sensor with EOL resistor, connected to Z and COM terminal, is triggered.
• Tapparella – Designed for connecing a wired external device (e.g. roller detector model Switchalarm3) to Z and COM terminals. To cause a zone
violaion it has to be triggered a set number of imes – pulses per ime period - when anyone atempts to physically open or close roller blinds. Speciic
pulses count can be set in sotware’s “Counter“ secion (the default number is 5).

11EN
EWD3 WIRELESS MAGNETIC DOOR CONTACT/SHOCK SENSOR/FLOOD SENSOR-READY
Supported zone mode combinaions and batery lifeime:
ZONE 1 ZONE 2
Magneic door contact
Shock sensor (up to 3 years)
Flood sensor (up to 4 years)
NO/NC sensor (up to 5 years)
EOL sensor (up to 2 years)
Tapparella (up to 3 years)
N/A (up to 5 years)
NO/NC sensor Shock sensor (up to 3 years)
N/A (up to 5 years)
EOL sensor Shock sensor (up to 2 years)
N/A (up to 2 years)
The batery operaion ime may vary under diferent coniguraion and condiions.
In case of tamper violaion, the alarm is caused regardless of system being armed or disarmed. There are 2 ways to detect tamper violaion on EWD3:
• By tamper switch. EWD3 comes equipped with a tamper switch intended for enclosure supervision. Once the enclosure of EWD3 is tampered, the
tamper switch will become triggered. By default, this acion will be followed by alarm, resuling in SMS text message delivery and/or phone call to the
user. The SMS text message contains the violated tamper name.
• By wireless connecion loss. The wireless connecion loss between EWD3 and ELDES alarm system leads to alarm. The system ideniies this event
as a tamper violaion and sends alarm by SMS text message and phone call to the user (-s) by default. The SMS text message contains the wireless
device model, wireless ID code and tamper name. The user will also be noiied by SMS text message as soon as the wireless signal is restored.
The tamper will not operate if both wireless zones are disabled.
For more details on EWD3 zone and tamper coniguraion, please refer to ELDES coniguraion sotware’s documentaion.
4. TEMPERATURE SENSOR
The device comes equipped with a temperature sensor allowing to monitor the temperature of the area surrounding EWD3 device. When using the device
paired with the alarm system, you may set the MIN and MAX temperature thresholds ranging from -20°C to +55°C (-4... +131°F) resuling in a noiicaion
delivery to the listed user and/or PGM output acion (turn ON/OFF; only on ESIM364 and ESIM384) once exceeded.
5. SHOCK SENSOR
EWD3 contains a built-in shock sensor (accelerometer) that detects the surface vibraions, such as drilling, knocking, hammering, of the locaion where the
device is installed. This feature allows to receive the alarm noiicaion in accordance with one of the selected sensiivity levels:
SENSITIVITY LEVEL DETECTION PROXIMITY
Low ~0,5m (~1.6t)
Medium ~1m (~3.3t)
High <2m (<~6.6t)
Custom for advanced users

12 EN EWD3 WIRELESS MAGNETIC DOOR CONTACT/SHOCK SENSOR/FLOOD SENSOR-READY
6. BATTERY REPLACEMENT
1. Open EWD3 enclosure.
2. Remove the old batery from the batery slots.
3. Insert the new Primary 3V Lithium 1500mAh CR123A type batery based on the batery slot posiive/negaive terminals indicated on the PCB of EWD3.
4. Batery replaced.
• We strongly recommend to use quality brand bateries, such as: GP, Ansmann, Energizer.
• Only Primary 3V Lithium 1500mAh CR123A bateries can be used. Install only new, high quality and unexpired batery.
• The batery must be removed or plasic tab inserted between the batery slot and the batery if the device is not in use.
• In order to avoid ire or explosion hazards, the system must be used only with approved batery.
• Special care must be taken when connecing posiive and negaive batery terminals.
• Dispose old bateries only into special collecion sites.
• Do not charge, disassemble, heat or incinerate old bateries.
• The batery status can be monitored in real-ime using ELDES coniguraion sotware.
• The system sends an SMS text message to the listed user phone number as soon as the batery level runs below 5%.
7. RESTORING DEFAULT PARAMETERS
1. Press and hold the RESET buton.
2. Hold the RESET buton and watch the LED indicator quickly lash (for
approx. 5 seconds.).
3. Release the RESET buton.
4. Parameters restored to default.
8. TECHNICAL SPECIFICATIONS
Compaible with:
• ESIM364 v02.16.00 and up.
• ESIM384 all versions
• PITBULL ALARM v2.05.00 and up.
• PITBULL ALARM PRO all versions.
Batery 3V Lithium 1500mAh CR123A type; CR17345 (IEC) / 5018LC (ANSI/NEDA)
Number of bateries 1
Batery operaion ime Up to 5 years*
Wireless band ISM868 or ISM915**
Wireless communicaion range Up to 30m (~98t) in premises; up to 3000m (~9843t) in open areas
Range of operaing temperatures -20…+55 °C (-4... +131°F)
Humidity 0-90% RH @ 0... +40°C (0-90% RH @ +32... +104°F) (non-condensing)
EWD3 dimensions 117x22x22mm (4.61x0.87x0.87in)
Magnet dimensions 47x13x10mm (1.85x0.51x0.39in)
Compaible with alarm systems ELDES wireless
* The operaion ime may vary under diferent condiions. ** Depends on region.

13EN
EWD3 WIRELESS MAGNETIC DOOR CONTACT/SHOCK SENSOR/FLOOD SENSOR-READY
TERMS OF USE
The following terms and condiions govern use of the EWD3 device and contains important informaion on limitaions regarding the product’s use and
funcion, as well as informaion on the limitaions of the manufacturer’s liability.
Please carefully read these terms and condiions. For more informaion on your product, please visit eldesalarms.com
TECHNICAL SUPPORT
In order to ensure coninuous and proper operaion of the EWD3 device and uninterrupted service, it is the responsibility of the User to make sure that:
(I) the product is properly installed, and (II) there is constant electrical supply (low batery must be replaced in ime). If you experience diiculty during
the installaion or subsequent use of the system, you may contact “ELDES, UAB” distributor or dealer in your country/region. For more informaion
see eldesalarms.com
SAFETY INSTRUCTIONS
Please read and follow these safety guidelines in order to maintain safety of operators and people around:
• DO NOT use the device where it can cause potenial danger and interfere with other devices – such as medical devices.
• DO NOT use the device in hazardous environment.
• DO NOT expose the device to high humidity, chemical environment or mechanical impact.
• DO NOT atempt to repair the device yourself – any repairs must be carried out by fully qualiied personnel only.
• EWD3 can be powered by a single Primary 3V Lithium 1500mAh CR123A batery. When insering the batery into the batery slots, mind
the polarity terminals!
• A blown fuse cannot be replaced by the user. The replacement fuse has to be of the kind indicated by the manufacturer (fuse F1 model –
PICOSMDC050S).
• The device is not meant for outdoor use, i.e. you should use it inside a building. Protect the device against cold, heat and keep away from
direct sunlight while in storage or operaion.
WARRANTY PROCEDURES
Warranty and out of warranty service should be obtained by contacing the system integrator/dealer/retailer/e-tailer or distributor where the
customer purchased the product. When requesing for service, the proof of purchase and the product serial number must be provided. The return
of the defecive product should be strictly through the original route of purchase, and the customers shall pack the product appropriately to prevent
the returned product from sufering in the transportaion.
MANUFACTURER WARRANTY
“ELDES, UAB” warrants this system only to the original purchaser and only in case of defecive workmanship and materials under normal use of
the system for a period of twenty four (24) months from the date of shipment by the “ELDES, UAB” (Warranty Period). Warranty obligaions do
not cover expandable materials (power elements and/or bateries), holders and enclosures. The warranty remains valid only if the system is used
as intended, following all guidelines outlined in this manual and in accordance with the operaing condiions speciied. The warranty is void if the
system has been exposed to mechanical impact, chemicals, high humidity, luids, corrosive and hazardous environments or force majeure factors.
If a hardware defect arises and a valid claim is received within the Warranty Period, at its own discreion, “ELDES, UAB” will either (a) repair a
hardware defect at no charge, using new or refurbished replacement parts, or (b) exchange the product with a product that is new or which has
been manufactured from new or serviceable used parts and is at least funcionally equivalent to the original product, or (c) refund the purchase
price of the product.
LIMITED LIABILITY
The buyer must agree that the system will reduce the risk thet, burglary or other dangers but does not provide guarantee against such events.
“ELDES, UAB” will not assume any responsibility regarding personal or property, or revenue loss while using the system.

14 EN EWD3 WIRELESS MAGNETIC DOOR CONTACT/SHOCK SENSOR/FLOOD SENSOR-READY
“ELDES, UAB” shall also assume no liability due to direct or indirect damage or loss, as well as unreceived income when using the system, includ-
ing cases, when the damages arise due to the above menioned risks, when due to breakdown or malfuncion the user is not informed in a imely
manner about a risk which has arisen. In any case, the liability of “ELDES, UAB”, as much as it is allowed by the laws in force, shall not exceed the
price of acquisiion of the product.
CONSUMER PROTECTION LAWS
FOR CONSUMERS WHO ARE COVERED BY CONSUMER PROTECTION LAWS OR REGULATIONS IN THEIR COUNTRY OF PURCHASE OR, IF
DIFFERENT, THEIR COUNTRY OF RESIDENCE, THE BENEFITS CONFERRED BY THIS WARRANTY ARE IN ADDITION TO ALL RIGHTS AND
REMEDIES CONVEYED BY SUCH CONSUMER PROTECTION LAWS AND REGULATIONS. This warranty grants upon you speciic legal rights,
and you may also have other rights that vary by country, state or province.
DISPOSAL AND RECYCLING INFORMATION
Copyright © ELDES UAB, 2018. All rights reserved
It is strictly forbidden to copy and distribute the informaion contained in this document or to pass thereof to a third party without an
a priori writen authorizaion obtained from “ELDES, UAB”. “ELDES, UAB” reserves the right to update or modify this document and/or
related products without an a priori warning. “ELDES, UAB” hereby declares that wireless magneic door contact/shock sensor/lood
sensor-ready EWD3 is in compliance with the essenial requirements and other relevant provisions of the Direcive 1999/5/EC. The
declaraion of conformity is available at eldesalarms.com.
The WEEE (Waste Electrical and Electronic Equipment) symbol on this product (see let) means it must not be disposed of in household
waste. To prevent possible harm to human health and/or the environment, you must dispose of this product in an approved and environ-
mentally safe recycling facility. For further informaion contact your system supplier, or your local waste authority.

15EN
EWD3 WIRELESS MAGNETIC DOOR CONTACT/SHOCK SENSOR/FLOOD SENSOR-READY
RU
1 .
EWD3 - , , /
. ,
(, , ..), o , NO/NC, EOL(end-of-line)
( ) ( )
/ . ,
SMS ELDES.
PITBULL ALARM PITBULL ALARM PRO 16 EWD3,
ESIM364 ESIM384 32 EWD3.
: 3000 ( ).
DETECTOR
/
RESET
COM
Z
LED LED
TAMPER
DETECTOR
DETECTOR
LED

16 RU EWD3 WIRELESS MAGNETIC DOOR CONTACT/SHOCK SENSOR/FLOOD SENSOR-READY
RESET Z
COM
TAMPER
+-
RESET Z
COM
2.
ELDES
,
, ELDES
/ ELDES, eldesalarms.com
5 , EWD3
.
( 1 .) - , ; , 3
, .
,
( . 7. )
3. EWD3
EWD3, 2 .
:
1:
• – ( ) /, .
• NO/NC – ( ), , Z COM,
. 2.
• EOL – ( ), EOL, Z
COM.
2:
• – ( ), .
• – ( ), EFS1,
Z COM.
• NO/NC – ( ), , Z COM,
.
• EOL – ( ), EOL, Z
COM.
• Tapparella – ( . Switchalarm3)
Z COM. , - (..
). «Tapparella »
( , - 5).

17RU
EWD3 WIRELESS MAGNETIC DOOR CONTACT/SHOCK SENSOR/FLOOD SENSOR-READY
:
1 2
( 3- )
( 4- )
NO/NC ( 5 )
EOL ( 2- )
Tapparella ( 3- )
( 5 )
NO/NC ( 3- )
( 5 )
EOL ( 2- )
( 2- )
.
, , . 2 ,
:
• . EWD3 , .
EWD3, . ,
SMS / . SMS .
• . ELDES EWD3 .
SMS
. SMS , ID . ,
SMS .
, .
, ELDES.
4.
, EWD3.
, ,
-20°C +55°C. , , SMS
/ (/; ESIM364 ESIM384).
5.
(), , EWD3.
:
~0,5
~1
<2

18 RU EWD3 WIRELESS MAGNETIC DOOR CONTACT/SHOCK SENSOR/FLOOD SENSOR-READY
6.
1. EWD3.
2. .
3. Primary 3Lithium 1500 CR123A . /
EWD3.
4. .
• : GP, Ansmann, Energizer.
• 3Lithium 1500 CR123A. ,
.
• , .
• .
• . .
• , .
• ELDES.
• SMS , 5%.
7.
1. RESET.
2. RESET LED
( 5 .)
3. RESET.
4. .
8.
:
• ESIM364 v02.16.00 .
• ESIM384 .
• PITBULL ALARM v2.05.00 .
• PITBULL ALARM PRO .
3 Lithium 1500 CR123A; CR17345 (IEC) / 5018LC (ANSI/NEDA)
1
5 *
ISM868 ISM915**
30 ; 3000
-20…+55 °C
0-90% RH @ 0... +40°C ()
EWD3 117x22x22
47x13x10
ELDES wireless
* . ** .

19RU
EWD3 WIRELESS MAGNETIC DOOR CONTACT/SHOCK SENSOR/FLOOD SENSOR-READY
EWD3 -
, . -
, . eldesalarms.com
T
EWD3, ,
: (I) ; (II) ( -
). ,
ELDES, UAB /. eldesalarms.com
, -
:
• , , . .
• , .
• , .
• - ,
.
• EWD3 3Lithium 1500 CR123A.
!
• , . F1 –
PICOSMDC050S).
• . ,
.
, / ,
. ,
.
ELDES, UAB ( ), -
, ELDES, UAB.
, 24 (
) ELDES, UAB. ( -
, - ()), . ,
( ,
). , , , ,
, , - . -
, (a)
, , (b)
/ , -
, (c) .

20 RU EWD3 WIRELESS MAGNETIC DOOR CONTACT/SHOCK SENSOR/FLOOD SENSOR-READY
, . , ,
. ELDES, UAB ,
. , ELDES, UAB -
, , , , -
. , ELDES, UAB -
, , .
,
, , ,
, ,
.
; , , .
Copyright © ELDES, UAB, 2018. .
, , ,
ELDES, UAB. ELDES, UAB -
, . ELDES, UAB ,
/ / EWD3 1999/5/EC.
eldesalarms.com.
WEEE ( ), -
, , ,
. / ,
. , -
, .
Other manuals for EWD3
1
Table of contents
Languages:
Other Eldes Accessories manuals
Popular Accessories manuals by other brands

LEGRAND
LEGRAND CH-250 installation instructions

Meari
Meari Bell 15S quick guide

American Standard
American Standard 24" Towel Shelf with Towel Bar 8040.300 installation instructions

Panasonic
Panasonic KX-HNS107C installation guide

Omnio
Omnio enocean EMDC-DECKE SOLARPIR manual

Aztech
Aztech Kyla Smart WiFi Plug user guide