Elecom M-D19DL Series User manual

- 1 -
CAUTION
Do not place this product in any of the following environments:
In a car exposed to sunlight, a place exposed to direct sunlight, or a
•
place that becomes hot (around a heater, etc.)
In a moist place or a place where condensation may occur
•
In an uneven place or a place exposed to vibration
•
In a place where a magnetic eld is generated (near a magnet, etc.)
•
In a dusty place
•
This product does not have a waterproof structure. Use and store this
product in a place where the product body will not be splashed with
water or other liquid.
Rain, water mist, juice, coee, steam or sweat may also cause product
damage.
When you no longer need to use this product and the battery, be
sure to dispose of it in accordance with the local ordinances and laws
of your area.
Batteries

CAUTION
For this product, use AAA alkaline batteries, AAA manganese batteries
or rechargeable AAA nickel hydride batteries.
If this product will be unused for a long period of time, remove the
battery to avoid battery leakage and failure.
Cleaning the Mouse

If the product body becomes dirty, wipe it with a soft, dry cloth.
Use of a volatile liquid (paint thinner, benzene, alcohol, etc.) may
aect the material quality and colour of the product.
Cautions forWireless Equipment
This product is wireless equipment using the entire range
of the 2.4 GHz band and it is possible to avoid the band of
mobile object identification systems. FH-SS is used for the radio wave method. The
interference distance is 10 m.
The 2.4 GHz band is also used by medical equipment, Bluetooth, and wireless LAN
equipment conforming to the IEEE802.11b/11g/11n standard.
Before using this product, check that there are no other “radio stations”* •
operating nearby.
If electromagnetic interference occurs between this product and other “radio •
stations”, move this product to another location or stop using this product.
* Other“radio stations”refer to industrial, scientific and medical devices using the 2.4 GHz
band like this product, other radio stations of this type, licensed radio station premises for
mobile object identification system that is used in factory production lines, certain non-
licensed low power radio stations and amateur radio stations.
WARNING
Do not use this product with a device that may have a serious function
●
or inuence. There are rare cases where an external radio wave at the
same frequency or the radio wave emitted from a mobile phone causes
this product to malfunction, slow down, or fail to operate.
Do not use this product in a hospital or other locations where the use
●
of radio waves is prohibited. The radio waves of this product may aect
electronic and medical devices (e.g. pacemaker).
The use of a wireless mouse in an aircraft is prohibited by aviation law
●
because doing so may interfere with ight safety. Turn o the power
of the mouse body before boarding an aircraft and do not use it in the
aircraft.
* ELECOM is not liable for any accident or social damages incurred by
the failure of this product.
Cautions for Laser Mouse
Though this product complies with the IEC60825-1 Class 1 laser safety standard to
ensure safety, pay special attention to the following before use.
(1) Never observe the laser beam by using an optical measure such as a
microscope or magnifier or view the laser with the naked eye for a long
period of time. Doing so may have an adverse eect on the eye. (Some laser
beams cannot be seen with the naked eye.)
(2) Never aim the rear surface of the mouse at a person’s eyes, as this is very
dangerous.
(3) The laser sensor may not work on glass or mirrored surfaces.
(4) Do not use this product for any application other than as a PC mouse.
(5) If this product is subjected to temperatures beyond its specications, turn
o the PC, and do not use the product until the temperature returns to the
operable range.
(6) If this product is not operating normally, turn o the PC.
2.4FH1
Safety Precautions
Meaning of symbols

WARNING Failure to observe precautions may result in serious personal injury or death due to re,
electric shock, or other causes.
CAUTION Failure to observe precautions may result in personal injury due to electric shock or
other causes, and may damage other equipment.
Prohibited action
Mandatory action
Situation that needs attention
Notes and reference information
Observe these precautions carefully to avoid personal injury, damage, re, and other problems.
WARNING
If a foreign object (water, metal chip, etc.) enters the product, immediately stop using the
product and disconnect the receiver unit from the PC, and remove the battery from the mouse.
If you continue to use the product under these conditions, it may cause a re or electric shock.
If an abnormality is found with this product (emission of heat, smoke or abnormal smell from
the product), immediately stop using the product, shutdown the PC, and after thoroughly
checking that heat from the product will not cause burns, disconnect the receiver unit from the
PC, and remove the battery from the mouse. After doing this, contact the retailer from whom
you purchased the product.
Do not drop or hit this product.
If this product is damaged, immediately stop using the product and disconnect the receiver unit
from the PC, and remove the battery from the mouse.
If you continue to use the product under these conditions, it may cause a re or electric shock.
Do not attempt to disassemble, modify or repair this product by yourself, as this may cause a
re, electric shock or product damage.
Do not put this product in re, as the product may burst, resulting in a re or injury.
Do not connect or disconnect the receiver unit with a wet hand, modify the receiver unit or
bend it forcibly, as this may cause a re or electric shock.
Package Contents
This product’s packaging contains the items listed below. Before using the
product, check that all items are present. We make every eort to ensure that all
products are packaged correctly. However, in the event that an item is missing
or damaged, contact the retailer from whom you purchased the product.
Mouse x1
•
Receiver unit x1
•
AAA alkaline battery x2
•
User’s Manual x1
•
Part Names
Mouse

b
a
c
ef
i
j
gh
k
d
Receiver unit

l
aWheel
The wheel can be turned back and forward with your finger or pressed like a
button to operate the PC.
bRight button
Used for right-click operation.
cLeft button
Used for left-click operation.
dRemaining battery level indicator lamp/Resolution switch
indicator lamp
Indicates when to replace the batteries.
y
* When a battery has been inserted, if there are sufficient remaining
battery levels, it will illuminate in red for a certain period of time, and if
low, it will ash continuously. If the remaining battery level becomes low
during use, it will ash continuously in red for a certain period of time.
Flashes when the resolution (mouse cursor speed) is changed.
y
* Flashes twice when switching from 800 to 1600
Flashes once when switching from 1600 to 800
e
Battery cover
This cover is removed to install batteries.
fLaser sensor
When the mouse body is moved, this sensor detects mouse movement.
* Avoid looking directly at the light of the sensor as doing so may cause eye
damage. Some laser beams cannot be seen with the naked eye.
g
Receiver unit housing
Used to store the receiver unit.
h
Power switch
Used to turn the mouse body on and o.
i
Battery removal sheet
Used to remove the batteries from the battery housing.
j
Battery housing
Batteries are inserted here.
kMaintenance switch
For factory use only.
lUSB connector (Male)
Connected to a PC USB port.
Installing·Replacing the Battery
Before using this product, install two AAA batteries in the mouse body.
Remove the battery cover.
Insert the batteries.
Make sure that the polarity is
●
correct.
Install the battery cover as before.
Replacing the Battery

Remove the battery cover.
Remove the batteries using the battery
removal sheet.
Insert the batteries.
Do not mix dierent types of
●
batteries or use old batteries
with new batteries to avoid
battery leakage and failure.
Install the battery cover as before.

Turning On and O the Mouse
Turning on the mouse

When using this product, turn the mouse body power on.
Slide the power switch to the ON position.
The remaining battery level indicator lamp is illuminated in red for a certain
period.
* When the remaining battery level is low, the remaining battery level indicator
lamp is ashed in red for a certain period.
Turning off the mouse

When not using this product, turn the mouse body off to save
battery power.
Slide the power switch to the OFF position.
Restoring from sleep state

Click the right mouse button.
To reduce battery drain, the mouse enters sleep mode automatically
if it is left without being operated for a certain period of time with
the power or switch turned on.
Inserting and Taking Out the Receiver Unit
Inserting the receiver unit

Place the receiver unit into the receiver unit
housing.
Taking out the receiver unit

Take the receiver unit out of the receiver unit
housing.
Preparation before Use
S
tep
1
Check USB ports
Check the USB port on your computer.
USB port
Any USB port may be used.
●
This product can be connected to a USB hub. However, it may not work
●
depending on the power supply capability of the USB hub.
S
tep2
Installing the Receiver Unit
Activate the PC.
If Windows® prompts you to choose an account (a user name) when it
●
starts up, be sure to log on using an administrator account.
Wait until Windows® has started up completely.
●
Insert the receiver unit into the USB port of the PC
USB port
Receiver unit
Insert here.
Carefully check the orientation of the connector and the place
●
where you will connect the receiver unit.
If you feel strong resistance when inserting the receiver unit,
●
check that the shape and orientation of the connector is correct.
Using excessive force may damage the connector and cause
injury.
The mouse driver is installed automatically.
S
tep3
Checking wheel operation
Check that the mouse scrolls up and down correctly in Windows® Internet
Explorer.
From the [Start] menu, select [All Programs], and then [Internet
Explorer].
Internet Explorer will launch.
Display your favourite web site in Internet Explorer and change
the size of the window so that the vertical scrollbar appears.
* The sample website used here is the ELECOM homepage.
Scrollbar
Scroll the wheel back and forth.
The mouse is operating normally if the screen
moves up and down as you scroll the wheel.
In applications that do not support scrolling, the screen will
not move when you scroll the wheel.
When using Windows®
Thank you for purchasing the ELECOM M-D19DL Series wireless laser mouse.
This manual describes the operating instructions and safety precautions for using the
M-D19DL Series. Ensure that you have read this manual before using the product. After
reading this manual, store it somewhere safe for future reference.
* Except in certain cases, the M-D19DL Series is referred to as“this product”in this manual.
Change resolution
The resolution (mouse cursor speed) can be switched between two levels.
The resolution switches when the right button and the wheel button
are held down simultaneously for around three seconds. The remaining
battery level indicator lamp ashes when the resolution changes.
800 Lamp ashes once
1600 Lamp ashes twice
Hold down right button and wheel button
simultaneously for around three seconds
Wireless Laser Mouse
M-D19DL Series
User's Manual

- 2 -
Troubleshooting
When the product appears to be
malfunctioning
When the mouse pointer on the screen does not move, or

moves unstably, when the mouse is moved
It is possible that the reectivity of the surface on which this product
is being used is not suitable for a laser mouse. Use this product on a
mouse pad that is designed for use with laser mice.
When using this product on a metallic surface such as a steel desk,
radio wave outreach may be shortened. In such cases, move the
receiver unit closer to the mouse until mouse operation stabilises.
It is possible that the receiver unit is not connected correctly to
the USB port. Disconnect the receiver unit from the USB port and
reconnect it.
The receiver unit and the mouse body are too far apart or there is a
possibility that the receiver unit is facing in a direction from which it
cannot receive radio signals.
Approximately
10 m
Receiver unit
Adjust the position of the receiver
unit. The operable range of this
product is the area within a circle
with a radius of 10 m from the
receiver unit. Depending on the
usage environment, the mouse
may not operate even when it is
within approximately 10 m of the
receiver unit. In such cases, move
the mouse closer to the receiver
unit until operation stabilises.
Interference may occur if multiple units of this product are used
together or if this product is used with other wireless devices. In this
case, change the channel of other wireless devices.
(Multiple units of this product have an automatic channel avoidance
function.)
Operation becomes unstable when battery power is low. See
“Installing·Replacing the Battery” on the reverse of this sheet, and
replace the batteries as soon as possible.
The alkaline batteries supplied with this product are for checking
•
product operation. These batteries may discharge and drain
during storing and shipping.
* When not using the mouse, turn it o to save battery power.
It is possible that the standard Windows mouse driver did not install
correctly and that this product is detected as an unknown device by
Windows®. This product is usually detected as a USB human interface
device. If it is detected as an unknown device, see “Removing an
unknown device,” and after removing the device from Device Manager,
repeat“Step 2 - Installing the Receiver Unit”on the front of this sheet.
If you have installed drivers and settings utilities produced by the original
manufacturer for a previous mouse, uninstall them rst. This product may
not operate correctly if a driver made by another company is installed. See
the instruction manual that was supplied with your previous mouse for
uninstall instructions.
It is possible that the driver is conicting with another driver such
as that for a laptop touch pad. To use this product correctly, you
must delete the touch pad driver. However, if you delete this driver,
you may not be able to use the touch pad or touch pad functions.
Contact the PC manufacturer for more details.
The wheel moves, but the mouse cursor does not

In certain applications that do not support the scrolling function, the
mouse cursor will not move when you move the wheel.
Removing an unknown device
If the standard Windows mouse driver did not install correctly and this
product is detected as an unknown device, remove the unknown device
from Device Manager, and then repeat “Step 2 - Installing the Receiver Unit”
on the front of this sheet.
If there are multiple unknown devices, before removing a
●
device, check that it is actually this product. Disconnect the
receiver unit and check which unknown device disappears.
The device that disappears is this product.
If the unknown device does not disappear even after you
●
have deleted the driver following the instructions below,
it is possible that there is something wrong with the PC.
Contact the PC manufacturer.
With the receiver unit connected to the PC, follow the procedure below
to remove the unknown device.
* Be sure to log on using an administrator account when Windows starts
up.
* Screen display may dier depending on operating system, but the
procedure remains the same.
S
tep
1
Check USB ports
Check the USB port on your computer.
USB port
Any USB port may be used.
●
This product can be connected to a USB hub. However, it may
●
not work depending on the power supply capability of the
USB hub.
S
tep2
Installing the Receiver Unit
Activate the Macintosh.
Wait until Mac OS X has started up completely.
●
Insert the receiver unit into a USB port on your Macintosh.
USB port
Receiver unit
Insert here.
Carefully check the orientation of the connector and
●
the place where you will connect the receiver unit.
If you feel strong resistance when inserting the
●
receiver unit, check that the shape and orientation of
the connector is correct. Using excessive force may
damage the connector and cause injury.
The mouse driver is installed automatically.
S
tep3
Checking wheel operation
Check that the vertical scrolling functions are working correctly in
Safari.
Click the Safari icon in the Dock.
Safari will launch.
If Safari is not in the Dock, double-click the
Safari icon in the Applications folder.
Display your favourite web site in Safari and change the
size of the window so that the vertical scrollbars appear.
* The sample website used here is the ELECOM homepage.
Scrollbar
Scroll the wheel back and forth.
The mouse is operating normally if the screen
moves up and down as you scroll the wheel.
In applications that do not support scrolling, the screen will
not move when you scroll the wheel.
When using Mac OS X®
Display Device Manager.
Windows® 7 and Windows Vista®
●
1. From the [Start] menu, right-click [Computer].
2. Click [Properties].
3. Click [Device Manager].
Windows® XP
●
1. From the [Start] menu, right-click [My Computer].
2. Click [Properties].
3. Click the [Hardware] tab.
4. Click .
The Device Manager window appears. Right-click the
unknown device, and click [Uninstall].
Click .
Disconnect the receiver unit and
restart the PC.
Repeat the procedure from “Step 2 - Installing the Receiver
Unit” on the front of this sheet.
Wireless Laser Sensor Mouse
M-D19DL Series
User's Manual
1st edition, September 10, 2010
ELECOM Co., Ltd.
This manual is copyright of ELECOM Co., Ltd.•
Unauthorised copying and/or reproducing of all or part of this manual is•
prohibited.
The specifications and appearance of this product may be changed•
without prior notice for product improvement purposes.
ELECOM Co., Ltd. shall bear no responsibility for any and all affects•
resulting from the use of this product regardless of the above reasons.
Export or service transaction permission under the Foreign Exchange and•
Foreign Trade Control Law is required in order to export this product or
parts of this product that constitute strategic materials or services.
Windows and the Windows logo are trademarks of the Microsoft group of•
companies.
Mac, Mac OS, and Macintosh are registered trademarks or trademarks of•
Apple Inc., in the United States
Company names, product names, and other names in this manual are•
generally trademarks or registered trademarks.
©2011 ELECOM Co., Ltd. All Rights Reserved.
廢電池請回收
低功率電波輻射性電機管理辦法
第十二條
經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不
得擅自變更頻率、加大功率或變更原設計之特性及功能。
第十四條
低功率射頻電機之使用不得影響飛航安全及干擾合法通信；
經發現有干擾現象時，應立即停用，並改善至無干擾時方得繼續使用。
前項合法通信，指依電信規定作業之無線電通信。
低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電機設
備之干擾。
당해 무선설비는 운용 중 전파혼신 가능성이 있음 .
B 급 기기 ( 가정용 정보통신기기 )
이 기기는 가정용으로 전자파적합등록을 한 기기로서
주거지역에서는 물론 모든 지역에서 사용할 수 있습니다 .
ELECOM CO., LTD.
1-1 Fushimi-machi 4-Chome Chuoku, Osaka Japan 541-8765
宜麗客（上海）貿易有限公司
上海市徐匯区肇嘉浜路1065甲号飛雕国際大厦704号
電話 : 86-21-33680011
FAX : [phone]
URL : http://www.elecom-china.com/
ELECOM (SHANGHAI) TRADING CO. , LTD.
Rm 704 , Feidiao International Bldg , 1065 ZhaoJiaBang Rd , Shanghai
, China 200030
TEL : [phone]
FAX : [phone]
URL : http://www.elecom-china.com/
Elecom Korea Co., Ltd.
5F Suam Bldg. 1358-17, Seocho2-dong, Seocho-gu, Seoul 137-862,
Korea
TEL : [phone]
FAX : [phone]
URL : www.elecom.co.kr
Basic specications
Product name Wireless laser sensor mouse
Article No. M-D19DL Series
OS Windows 7 (up to SP1),
Windows Vista (up to SP2)
Windows XP (SP2 to SP3)
Mac OS X 10.5 to 10.5.8, 10.6 to 10.6.7
Resolution (dpi) 800/1600 (Switchable)
Interface USB
Radio frequency 2.4 GHz bandwidth
Radio wave method FH-SS modulation
Radio wave outreach Non-magnetic substance (e.g. wooden desk):
Approx. 10 m
Magnetic substance (e.g. metal desk): Approx. 3 m
* Test values in the ELECOM environment
Mouse body dimensions 56.0 (W ) x 92.0 (D) x 36.8 (H) mm
Receiver Dimensions 15.0 ( W) x 17.5 (D) x 6.0 (H) mm
Operating temperature/
humidity
5 to 40°C, 90% RH max. (no condensation)
Storing temperature/
humidity
-10 to 60°C, 90% RH max. (no condensation)
Batteries AAA alkaline battery, AAA manganese battery,
rechargeable AAA nickel hydride battery
Operating time Measure of the operating time when an AAA alkaline
battery is used
Continuous operating time: Approx. 128 hours
Continuous standby time: Approx. 187 days
Estimated serviceable time: Approx. 59 days
(when the PC is operated for eight hours a day and 25%
of the PC operation is assigned to mouse operation)