Elecom M-EGUR Series User manual

- 1 -
CAUTION
Do not place this product in any of the following environments:
In a car exposed to sunlight, a place exposed to direct sunlight, or a place that becomes
y
hot (around a heater, etc.)
In a moist place or a place where condensation may occur
y
In an uneven place or a place exposed to vibration
y
In a place where a magnetic eld is generated (near a magnet, etc.)
y
In a dusty place
y
This product does not have a water-proof structure. Use and store this product in a place
where the product body will not be splashed with water or other liquid.
Splashing the product with rain, water mist, juice, coffee, steam or sweat may cause
product damage.
Precautions for Using this Product
Do not use this product for equipment which will be significantly affected by a
y
malfunction of this product.
If this product is used on a transparent object (glass, etc.) or an object with high
y
reflectivity (mirror, etc.), the optical sensor will not function normally, resulting in
unstable movement of the mouse cursor.
When the mouse is left unused for a long period, disconnect it from your PC.
y
When you no longer need to use this product, be sure to dispose of it in accordance with
y
the local ordinances and laws of your area.
Cleaning the Mouse
If the product body becomes dirty, wipe it with a soft, dry cloth.
Use of a volatile liquid (paint thinner, benzene, alcohol, etc.) may affect the material
quality and colour of the product.
Package Contents
The product package includes the following items.
Before starting the setup procedure, check if all these items are included in the package:
Mouse x1
y
User’s Manual (this manual) x1
y
Part Names and Functions
(Bottom)
Wheel
You can operate certain functions on your PC by turning the wheel forward and backward.
Right button
Used for right-click operation on the PC.
Left button
Used for left-click operation on the PC.
USB connector (male)
To be connected to a USB port on the PC.
Optical sensor
When the mouse body is being moved, the optical sensor detects the mouse movement.
* Be careful not to stare directly into the light from the sensor, as this may damage your eyes.
Meanings of pictorial symbols

WARNING Failure to observe the instruction accompanied by this symbol may cause a re,
electric shock or other accidents which may result in death or serious injury.
CAUTION Failure to observe the instruction accompanied by this symbol may cause
an electric shock or other accidents which may result in injury or damage
to other equipment.
Prohibited action that must not be conducted.
Mandatory action that must be conducted.
Situation that needs attention.
Notes and reference information.
Useful hints.
Safety Precautions
To prevent injury, product damage and re, be sure to read the instructions described below.
WARNING
If an abnormality is found with this product (emission of heat, smoke or abnormal smell
from the product), or if a foreign object (water, metal chip, etc.) enters the product,
immediately stop using the product and disconnect it from your PC.
If you continue to use the product under these conditions, it may cause a re or electric
shock.
Do not drop or hit this product.
If this product is damaged, immediately stop using the product and disconnect it from
your PC.
If you continue to use the product in a damaged condition, it may cause a fire or
electric shock.
Do not attempt to disassemble, modify or repair this product by yourself, as this may
cause a re, electric shock or product damage.
Do not put this product in re, as the product may burst, resulting in a re or injury.
Do not connect or disconnect the connector with a wet hand, modify the connector or
bend it forcibly, as this may cause a re or electric shock.
Do not stare into the optical sensor (red light) at the bottom of this product, as this may
damage your eyes.
Do not get the sensor dirty or damage this sensor.
M-EGUR series
User's Manual
Thank you for purchasing the ELECOM M-EGUR Series EGG optical mouse.
This manual describes the operating instructions and safety precautions for using the
M-EGUR Series. Ensure that you have read this manual before using the product. After
reading this manual, store it somewhere safe for future reference.
* Except in certain cases, the M-EGUR Series is referred to as“this product” in this manual.
Connecting the Mouse
Insert the USB connector of the mouse into a USB port on your PC.
Any USB port may be used.
y
A USB port via a USB hub may also be used. Note that there are cases in which this
y
product will not operate depending on the power supply capacity of the USB hub.
To use the mouse with Windows
y®2000, leave the currently-used mouse connected to
your PC. During the Windows standard mouse driver installation step described later,
mouse operation may be required.
If the currently-connected mouse uses the manufacturer’s original driver or setup utility,
y
uninstall the driver or utility software in advance. If driver software for another product
has been installed, this product may not operate normally. For the uninstallation
procedure, refer to the operation manual for the currently-used mouse.
The PC operating procedure described below varies depending on which OS is used.
Windows Vista
y®or Windows®XP
The Windows standard mouse driver will be automatically installed.•
Proceed to the step of“Using the Mouse” .
Windows
y®2000
If the “Found New Hardware Wizard” screen is not displayed, the Windows standard•
mouse driver will be automatically installed.
Proceed to the step of“Using the Mouse” .
If the “Found New Hardware Wizard” screen is displayed, you must manually install the•
Windows standard mouse driver.
Proceed to the step of “Installing theWindows Standard Mouse Driver” (p. 6).
Disconnecting the mouse

This product is compatible with hot plug. The mouse can be disconnected even while Windows®is
running.
If the mouse connection and disconnection are repeated several times while Windows®
is running, the mouse operation may become unstable. In this case, restart the Windows®
OS.
Installing the Windows Standard Mouse Driver (forWindows®
2000 only)
In Windows®2000, a wizard screen may be displayed after connection of the USB connector.
If a wizard screen is displayed, install the Windows standard mouse driver according to the description
for each OS below:
Keyboard operation
When Windows®2000 is used, mouse operation may be required during installation of
the Windows standard mouse driver. If no mouse or touch pad is provided for your PC,
operate the keyboard according to the following description:
: Used to move the cursor between items or buttons.
/ : Used to move the cursor between options, if options are provided for an item.
(Space)
: Every time you press this key, a checkbox is turned on/o.
* To execute the , and
buttons, press the
key.
If the “Found New Hardware Wizard” Screen is Displayed in Windows®
2000
After connection of the USB connector, Windows®2000 may
display the “Found New Hardware Wizard” screen depending
on the operating environment of your PC.
In this case, click on and install the Windows standard
mouse driver by following the displayed message.
If the “Found New Hardware Wizard” screen is not displayed, manual installation is not
y
required.
If the “Locate Driver Files” screen appears in the middle of the installation procedure,
y
turn o all checkboxes for“Optional search locations”and proceed to the next step.
Make sure that each checkbox is off (o)
After installation of the Windows standard mouse driver is completed, proceed to the step of
“Using the Mouse”described below.
Using the Mouse
Checking the Wheel Operation
After the Windows®standard mouse driver is installed successfully, you can move the cursor with
the mouse and use the mouse right/left buttons.
In this example, check if the mouse wheel operates normally using the Windows®Notepad
application.
Click on the [start] button and click on [All Programs] – [Accessories] – [Notepad].
The “Notepad” application opens.
Set the height of the Notepad screen so as to display about 10 lines.Enter a character and
begin on a new line repeatedly.
* In the following example, numbers 0 to 9 are each entered on a new line in sequence.
When the number of lines or characters that
can be displayed on the screen is exceeded, the
scroll bar appears.
Turn the mouse wheel forward and backward.
If the screen scrolls up/down according to the action
of your nger, the wheel operation is normal.
For some applications that do not support the wheel function, the wheel may not work even if the
wheel is operated.

- 2 -
Optical mouse
M-EGUR Series
User's Manual
First Edition, January 10, 2012
ELECOM Co., Ltd.
This manual is copyright of ELECOM Co., Ltd.•
Unauthorised copying and/or reproducing of all or part of this manual is prohibited.•
The specications and appearance of this product may be changed without prior notice for•
product improvement purposes.
ELECOM Co., Ltd. shall bear no responsibility for any and all affects resulting from the use of this product•
regardless of the above reasons.
Export or service transaction permission under the Foreign Exchange and Foreign Trade Control Law•
is required in order to export this product or parts of this product that constitute strategic materials or
services.
Windows and the Windows logo are trademarks of the Microsoft group of companies.•
Mac, Mac OS, and Macintosh are registered trademarks or trademarks of Apple Inc., in the•
United States
Company names, product names, and other names in this manual are generally trademarks•
or registered trademarks.
©2012 ELECOM Co., Ltd. All Rights Reserved.
맑은고딕이 기기는 가정용 (B 급 ) 전자파적합기기로서 주로 가정에서 사용하는 것을 목적으로
하며 , 모든 지역에서 사용할 수 있습니다 .
Hereby, ELECOM Co., Ltd., declares that this product is in compliance with the essential requirements
and other relevant provisions of Directive [2004/108/EC].
Troubleshooting
When the Mouse does not Operate Normally:
The mouse pointer does not move on the screen even when the

mouse is moved or the mouse pointer movement is unstable.
The light reectivity on the surface on which the mouse is being operated may not be suitable
Î
for the optical mouse.
When the mouse is connected to a USB port, it may be registered as an “unknown device”
Î
in Windows® because the Windows standard mouse driver has not been installed normally.
Typically, this product is registered as a “USB human interface device” when it is connected to
a USB port. If it is registered as an “unknown device”, delete the “unknown device”from Device
Manager according to the procedure below (“Deleting an Unknown Device”) and then conduct
the installation procedure again from the step of“Connecting the Mouse”(p.5).
The mouse driver may conict with another driver for the notebook PC touch pad and so on.
Î
To use this product normally, it is necessary to uninstall the other driver (touchpad driver,
etc.). However, once the driver is uninstalled, the touchpad does not work and the functions
dedicated to the touchpad are disabled. For details, contact the PC manufacturer.
The mouse cursor moves but the wheel does not work.

With some applications that do not support the wheel function, the wheel may not work even
Î
if the wheel is operated.
When the mouse is connected, the optical sensor emits light even

after the PC power switch is turned o.
Depending on the PC specications, the optical sensor may emit light while the standby power
Î
is supplied, even after the PC power switch is turned o. This condition is not an error with the
mouse because it is attributable to the PC specications. In this case, disconnect the mouse
from the PC or disconnect the PC power supply plug from the outlet. For the procedure for
stopping the standby power supply to the mouse without disconnecting the PC power supply
plug from the outlet, contact the PC manufacturer. (Some PC models cannot stop the standby
power supply because of the PC specications.)
Deleting an Unknown Device
If this product is registered as an “unknown device” because of improper installation of the
Windows standard mouse driver, delete the “unknown device” from Device Manager according
to the procedure below and then conduct the installation procedure again from the step of
“Connecting the Mouse”.
If several “unknown devices” have been registered, identify which of the “unknown
y
devices” corresponds to the information recognised for this product before deleting the
unknown devices. Disconnect this product from the PC to see which device information
for “unknown devices” disappears. The device that disappears is the information
recognised for this product.
If the “unknown devices” remain even after the driver is uninstalled according to the
y
procedure below, there may be a problem with the PC. Contact the PC manufacturer for
detailed information.
With the mouse connected to the PC, delete the “unknown device” according to the procedure
below.
Open Device Manager.
For Windows Vista
y®
1. Click on the [start] button and click the right mouse button on [Computer].
2. Click on [Properties].
3. Click on [Device Manager].
For Windows
y®XP/2000
1. For Windows®XP, click on the [start] button and click the right mouse button on [My
Computer].
For Windows®2000, click the right mouse button on the [My Computer] icon on the
desktop.
2. Click on [Properties].
* The above example shows the Windows®XP screen.
3. Click on the [Hardware] tab.
4. Click on .
After the [Device Manager] screen is displayed, click the right mouse button on [Unknown
Device] and click on [Uninstall].
Click on .
Disconnect the mouse and restart the PC.
Conduct the installation procedure again from the step of “Connecting the Mouse” (p. 5)
Basic Specications
Product name EGG optical mouse
Model M-EGUR series
Interface USB
Compatible OS Windows 7 (up to SP1), Windows Vista (up to SP2), Windows XP (SP3)
Mac OS X (10.5 to 10.5.8, 10.6 to 10.6.8, 10.7 to 10.7.2)
Number of counts 1000
Dimensions 65.0 (W) x 86.5 (D) x 46.0 (H) mm
Weight Approx. 80 g
Operating temperature/humidity 5 to 40°C, 90% RH max. (no condensation)
Storing temperature/humidity -10 to 60°C, 90% RH max. (no condensation)
ELECOM CO., LTD.
1-1 Fushimi-machi 4-Chome Chuoku, Osaka Japan 541-8765
URL: http://www.elecom.co.jp/global/
[email protected]
宜麗客（上海）貿易有限公司
上海市徐匯区肇嘉浜路1065甲号飛雕国際大厦704 号
電話 : 86-21-33680011
FAX : [phone]
URL : http://www.elecom-china.com/
ELECOM Korea Co., Ltd.
5F Suam Bldg. 1358-17, Seocho2-dong, Seocho-gu, Seoul 137-862, Korea
TEL : [phone]
FAX : [phone]
URL : www.elecom.co.kr
ELECOM Singapore Pte. Ltd
33 UBI AVENUE 3 # 03-56.VERTEX SINGAPORE (408868)
TEL : [phone]
FAX : [phone]
ELECOM India Pvt. Ltd.
408-Deepali Building, 92- Nehru Place, New Delhi-110 019, India
TEL: [phone]
e-mail: [email protected]
URL: http://www.elecom-india.com/