Elecrow MF156S User manual

ELECROW 15.6” 1920*1080
IPS Portable Monitor
Model: MF156S
USER MANUAL
Customer Support:
Should there be any questions, please feel free to let us know and contact us with
your purchase order number at [e-mail].

Table of Contents
2019 ELECROW All Rights Reserved.
C1
Chapter 01: Before Using the Product
1-1. Safety Precautions
1-1-1. Electricity and Safety
1-1-2. Installation
1-1-3. Cleaning
1-2. Package Contents
1-3. Product Description
Chapter 02: Connecting and Using a Source Device
2-1. Connected to Laptop (with Full Function USB Type-C Port)
2-2. Connected to Mobile Phone (with Full Function USB Type-C Port)
2-3. Connected to PC/Laptop (with HDMI Port)
2-4. Connected to Other Devices (with HDMI Port)
2-5. How to Set Your PC/Laptop Monitor to Duplicate or Extend
Mode & How to Rotate the Screen
Chapter 03: Screen Setup
OSD Function Introduction
Chapter 04: Specifications
Chapter 05: Troubleshooting Guide and Warranty
5-1. Troubleshooting Guide
5-2. Warranty
5-3. Custormer Support
2
2
2
2
2
3
3-4
5
5
5
5
6
6
7-9
7-9
10
10
11
11
11

Chapter 01 Before Using the Product
1-1. Safety Precautions
2019 ELECROW All Rights Reserved.
C2
―Take the following steps when cleaning.
• 1. Power off the product and computer.
• 2. Disconnect the power cord from the product.
— Hold the power cable by the plug and do not touch the cable with wet hands. Otherwise, an electric shock
may result.
• 3. Wipe the monitor with a clean, soft and dry cloth.
• Do not apply a cleaning agent that contains alcohol, solvent, or surfactant to the monitor
• Do not spray water or detergent directly on the product.
1-1-1. Electricity and Safety.
1-1-2. Installation
1-1-3. Cleaning
• Do not use a damaged power cord or plug, or a loose power socket.
• An electric shock or fire may result.
• Do not touch the power plug with wet hands.
• An electric shock may result.
• Insert the power plug all the way in so it is not loose.
• An unsecure connection may cause a fire.
Warning
!
Warning
!
• Do not install the product near heat sources.
• A fire may result.
• Do not set down the product on its front.
• The screen may become damaged.
• Do not install the product on an unstable or vibrating surface (insecure shelf, sloped surface, etc.)
• The product may fall and become damaged and/or cause an injury.
• Using the product in an area with excess vibration may damage the product or cause a fire.

1-2. Package Contents
1-3. Product Description
2019 ELECROW All Rights Reserved.
C3
• 4. Wet a soft and dry cloth in water and wring thoroughly to clean the exterior of the product.
• 5. Connect the power cord to the product when cleaning is finished.
• 6. Power on the product and computer.
363.0mm
223.0mm
10.0mm
6mm
• 1x Monitor
• 1x Power adapter
• 1x USB A to Type C cable
• 1x Type C to Type C cable
• 1x HDMI to Mini HDMI Connecting Cable
• 1x Stand
1
2
3
Mini HDMI: For audio and video signal transmission.
USB Type C: For power supply, audio and video signal transmission.
1
2 3

2019 ELECROW All Rights Reserved.
C4
2
1
3
4
Power/Return Key: Short press to turn on the monitor, long press for 3
seconds to turn off the monitor.
• When in the main interface, short press to enter input signal menu.
• When in OSD menu, short press to return to the previous menu.
Light: Green/Red light, indicated the working status.
Roll Key: Press the Roll Key to enter the setting OSD menu. Scroll the Roll
Key up and down in the menu to control the cursor. Press the Roll Key to
confirm the selection.
Headphone: 3.5mm headphone jack for audio output.
1
2
3
4
• Scrolling up the Roll Key in the main interface to open brightness
adjustment menu, then adjust the brightness by up and down.
• Scrolling down the Roll Key in the main interface to open volume
adjustment menu, then adjust the volume by up and down.
Speaker Speaker
VESA
75x75mm

Chapter 02 Connecting and Using a Source Device
2-1. Connected to Laptop (with Full Function USB Type-C Port)
2-2. Connected to Mobile Phone (with Full Function USB Type-C Port)
2019 ELECROW All Rights Reserved.
C5
2-3. Connected to PC/Laptop/Other Devices (with HDMI Port)
COMPUTER
Type C to type C
Note: 1. When the brightness and volume are adjusted to above 80%, it is recommended to connected to an external
power supply of 5V/3A or above. 2. Not all the laptop with a USB Type-C port can work with this monitor, please
make sure it supports audio and video signal transmission.
!
Note: 1. When there is no external power, the mobile phone battery powers the monitor. (The energy-saving mode is
activated, and the display brightness is automatically adjusted to 30%.) Users can adjust the brightness and volume of
the monitor according to the input power of the mobile phone. 2.When external power is supplied, the monitor
charges the mobile phone through the external power supply. To ensure that the display and mobile phone can get
sufficient working current, please use power of 5V/3A or above.
!
Note:Some computers have low power USB ports, please connect an external power supply of 5V/3A or above.
!
DISPLAY
DISPLAY
DISPLAY
Type C to type C
Mini HDMI to HDMI
External Power Supply
External Power Supply
External Power Supply
COMPUTER

2-5. How to Set your PC/Laptop Monitor to Duplicate or Extend
Mode & How to Rotate the Screen
2019 ELECROW All Rights Reserved.
C6
• 4. Click the Orientation drop-down list, select Portrait or Landscape screen.
* If you can’t see the option of Orientation on your PC/laptop, please check if your PC/laptop
has this function.
• 1. Connect the monitor to your PC properly and power it on.
• 2. Right click the desktop and select Screen resolution (Win 7/8) or Display settings (Win 10).
• 3. Click the Multiple display drop-down list, select Extend these displays or Duplicate these
displays.
*If you can’t see the additional monitor listed, please click Detect. If it doesn’t work. Restart
your PC then try above steps again.
2-4. Connected to PC/Laptop/Other Device (with HDMI Port)
External Power Supply
DISPLAY
Mini HDMI to HDMI

Chapter 03 Screen Setup
2019 ELECROW All Rights Reserved.
C7
OSD Function Introduction
Brightness
Image
• Brightness:Control the screen brightness (adjust range 0-100).
• Contrast:Control the contrast of the pictures displayed on the screen (adjust range 0-100).
• ECO:Adjust the ECO mode.
• DCR:Turn dynamic contrast on or off by selecting“ON”or“OFF”mode.
• Sharpness:Control the clarity of details of pictures displayed on the screen(adjust range 0-4).
• Aspect: Adjusts the aspect ratio to“16:9” or “4:3”.
BRIGHTNESS
BRIGHTNESS
50
CONTRAST
ECO
DCR
DCR
50
2
STANDARD
OFF
IMAGE
H.POSITION
50
V.POSITION
CLOCK
PHASE
ASPECT
50
50
50
16:9

2019 ELECROW All Rights Reserved.
C8
Color Temperature
OSD Setting
On this page, users could set some value about the OSD menu itself such as the language,
OSD timeout and transparency.
• The color temperature function contains three preset color modes (Cool/Warm/User) . When you
select the color temperature as Cool/Warm, its corresponding red/green/blue values will also be
displayed below. And only under the User Mode, the parameter of RED/GREEN/BLUE could be
adjusted by user.
OSD SETTING
LANGUAGE
OSD H. POS .
OSD V. POS .
OSD TIMER
TRANSPARENCY
50
50
10
0
COLOR TEMP .
COLOR TEMP .
50
RED
GREEN
BLUE
50
50
USER
• Language: Select the OSD language.
The selections are: English, French, German, Simplified Chinese, Italian, Spanish, Dutch, Portugal, Turkish,
Polish, Japanese, Korean.
• OSD H. POS.: Adjust the horizontal position of OSD menu and the adjusting range is from 0 to 100.
• OSD V. POS.: Adjust the vertical position of OSD menu and the adjusting range is from 0 to 100.
• OSD Timer: Adjust OSD timeout from 10 to 60.
• Transparency: Adjust the transparency of OSD menu and adjusting range is from 0 to 100.

2019 ELECROW All Rights Reserved.
C9
Displays the monitor information. And the customer could adjust the signal source, low
blue light, volume parameter.
Reset
MISC.
• Signal Source:Adjust the signal source to“TYPE C1”, “TYPE C2”or “HDMI”.
• Low Blue Light: Decrease the blue light emitted from the display.
• Volume: Adjust the volume in the range of 0-100.
• Mute: Turn mute on or off by selecting “ON”or“OFF” mode.
• Reset: Press revert all settings to the factory default mode.
• Auto Powerdown: Set auto power down by selecting OFF, 240, 120, 60, 50, 40, 30, 20, 10.
• HDR Mode: Set HDR mode by selecting 2084, OFF, AUTO.
MISC .
SIGNAL SOURCE
LOW BLUE LIGHT
1920X1080 60HZ
0
VOLUME
50
MUTE
TYPE C2
OFF
RESET
IMAGE AUTO ADJUST
COLOR AUTO ADJUST
RESET
AUTO POWERDOWN
HDR MODE
OFF
OFF

2019 ELECROW All Rights Reserved.
C10
Chapter 04 Specifications
Chapter 05 Troubleshooting Guide and Warranty
5-1. Troubleshooting Guide
• This page deals with problems that can be corrected by a user. If the problem still persists after you
have tried these solutions, please contact customer support.
Model Name
Panel Size
Panel Type
Aspect Ratio
Brightness
Color Gamut
Display Color
Resolution
Viewing Angle
Refresh Rate
Power Source
Built-in Speaker
Phys. Dimension (WxHxD)
Net Weight (Esti.)
Shell Material
MF156S
15.6 inch
IPS
16:9 or 4:3 (W:H)
250cd/m²
47% NTSC
16.7M
1920*1080 Full HD IPS
85/85/85/85
60Hz
USB 5V (USB Type C)
Yes
363*223*6(10mm)
883.5g
Aluminium Alloy

2019 ELECROW All Rights Reserved.
C11
5-2. Warranty
• ELECROW Monitors carry a one (1) year limited warranty from the purchase date. In order to
receive warranty service, proof of purchase of the ELECROW product is required. To obtain warranty
service, please contact Customer Support.
• This limited warranty does not cover for:
Improper installation or maintenance; Misuse or Neglect; Repair, modification, or installation of
options or parts by you or any third party; Improper environment- Excessive or inadequate heating
or air conditioning or electrical powers failures, surges or other irregularities; Fire, flood, earthquake
or other accidents.
Problem
No Power
No Picture/No Signal
No Sound
Dark/Light Picture
Image is Blurred
Possible Solutions
1. Make sure the power cord is plugged properly.
2. Press the power button to check if the monitor is ON.
1. Check whether the monitor and the signal output device are in
the ON mode.
2. Reconnect the signal cable.
3. Check if the signal is matched with the input function.
4. Connect another available output device/signal cable/monitor
to check whether the issue is caused by the output device
hardware, the video signal to the monitor or the monitor itself.
1. Adjust the volume settings via the button.
2. Check whether the headphone is inserted.
3. The silencer is working.
Adjust the Brightness settings via the button.
Select the correct resolution.
5-3. Customer Support
• If you have any questions, customer support is always stand by.
@[e-mail] @elecrow