Elecrow SF116 User manual

ELECROW 11.6” 1920*1080
IPS Portable Monitor
Model: SF116
USER MANUAL
Customer Support:
Should there be any questions, please feel free to let us know and contact us with
your purchase order number at [e-mail].

Table of Contents
2019 ELECROW All Rights Reserved.
C1
Chapter 01: Before Using the Product
1-1. Safety Precautions
1-1-1. Electricity and Safety
1-1-2. Installation
1-1-3. Cleaning
1-2. Package Contents
1-3. Product Description
1-3-1. Port Description
1-3-2. Button Indications
Chapter 02: Connecting and Using a Source Device
2-1. Connected to Laptop (with HDMI Port)
2-2. Connected to PC (with VGA Port)
2-3. How to Set Your PC/Laptop Monitor to Duplicate or Extend Mode & How to
Rotate the Screen
Chapter 03: Screen Setup
3-1. How to Reconfigure OSD (On-Screen Display) Menu
3-2. OSD Function Introduction
Chapter 04: Specifications
Chapter 05: Troubleshooting Guide and Warranty
5-1. Troubleshooting Guide
5-2. Warranty
5-3. Custormer Support
2
2
2
2
2
3
3
4
4
5
5
5
5-6
6
6
7-9
9
10
10
11
11

Chapter 01 Before Using the Product
1-1. Safety Precautions
2019 ELECROW All Rights Reserved.
C2
―Take the following steps when cleaning.
• 1. Power off the product and computer.
• 2. Disconnect the power cord from the product.
— Hold the power cable by the plug and do not touch the cable with wet hands. Otherwise, an electric shock
may result.
• 3. Wipe the monitor with a clean, soft and dry cloth.
• Do not apply a cleaning agent that contains alcohol, solvent, or surfactant to the monitor
• Do not spray water or detergent directly on the product.
1-1-1. Electricity and Safety.
1-1-2. Installation
1-1-3. Cleaning
• Do not use a damaged power cord or plug, or a loose power socket.
• An electric shock or fire may result.
• Do not touch the power plug with wet hands.
• An electric shock may result.
• Insert the power plug all the way in so it is not loose.
• An unsecure connection may cause a fire.
Warning
!
Warning
!
• Do not install the product near heat sources.
• A fire may result.
• Do not set down the product on its front.
• The screen may become damaged.
• Do not install the product on an unstable or vibrating surface (insecure shelf, sloped surface, etc.)
• The product may fall and become damaged and/or cause an injury.
• Using the product in an area with excess vibration may damage the product or cause a fire.

1-2. Package Contents
1-3. Product Description
2019 ELECROW All Rights Reserved.
C3
• 4. Wet a soft and dry cloth in water and wring thoroughly to clean the exterior of the product.
• 5. Connect the power cord to the product when cleaning is finished.
• 6. Power on the product and computer.
288.0mm
185.0mm
25.0mm
• 1 x Monitor
• 1 x HDMI to HDMI Cable
• 1 x Power Supply
• 1 x Metal Stand
• 1 x User Manual

1-3-1. Port Description
1-3-2 . Button Indications
2019 ELECROW All Rights Reserved.
C4
2
1
3
4
1
2
3
4
5
6
Speaker
HDMI: Video signal and audio input.
VGA: Video signal input.
AUDIO INPUT: Audio signal input when connected VGA.
DC 12V: DC 12V power port.
1
2
3
4
HDMIEARPHONE VGADC 12V
MENU DOWN UP LED POWERAUTO
Press to display the setting OSD menu.
By default, the key is the hot key for volume.
When in the OSD menu, press for down/decrease adjustment.
By default, the key is the hot key for brightness.
When in the OSD menu, press for up/increase adjustment.
When in the OSD menu, press to exit the OSD menu.
Green light, indicated the working status.
Turn on/off the monitor when it powered.
When in the OSD menu, press to confirm the selection.
MENU
DOWN
UP
AUTO
LED
POWER
123456

Chapter 02 Connecting and Using a Source Device
2-1. Connected to Laptop (with HDMI Port)
2-2. Connected to PC (with VGA Port)
2-3. How to Set your PC/Laptop Monitor to Duplicate or Extend
Mode & How to Rotate the Screen
2019 ELECROW All Rights Reserved.
C5
DISPLAY
• 1. Connect the monitor to your PC properly and power it on.
• 2. Right click the desktop and select Screen resolution (Win 7/8) or Display settings (Win 10).
• 3. Click the Multiple display drop-down list, select Extend these displays or Duplicate these
displays.
*If you can’t see the additional monitor listed, please click Detect. If it doesn’t work. Restart
your PC then try below steps again
COMPUTER
HDMI to HDMI cable
12DC 12V Power
VGA to VGA cable
12DC 12V Power
1
2
DISPLAY 1
2

Chapter 03 Screen Setup
3-1. How to Reconfigure OSD (On-Screen Display) Menu
2019 ELECROW All Rights Reserved.
C6
• 4. Click the Orientation drop-down list, select Portrait or Landscape screen.
* If you can’t see the option of Orientation on your PC/laptop, please check if your PC/laptop
has this function.
• 1. Press the MENU button to activate the OSD menu.
• 2. Press the UP/DOWN button to toggle between options in the Menu. As you move from one icon
to another, the option item is highlighted.
• 3. To select the highlighted item on the menu press the button MENU.
• 4. Press the UP/DOWN button to select the parameter.
• 5. Press the button MENU to enter the slide bar and then use the UP/DOWN button to make your
changes, according to the indicators on the menu.
• 6. Select the AUTO to return to the previous menu or MENU to save the setting. If you want to
adjust any other functions, repeat steps 2-5.

2019 ELECROW All Rights Reserved.
C7
3-2. OSD Function Introduction
Brightness
Image
• Brightness:The adjusting range is from 0 to 100.
• Contrast:The adjusting range is from 0 to 100.
• ECO:Adjust the ECO mode(GAME/MOVIE/TEXT/STANDARD).
• DCR:Turn dynamic contrast on or off by selecting“ON”or“OFF”mode.
• Aspect: Adjusts the aspect ratio to“WIDE”or “4:3”.
BRIGHTNESS
BRIGHTNESS
50
CONTRAST
ECO
DCR
50
STANDARD
OFF
IMAGE
H.POSITION
50
V.POSITION
CLOCK
PHASE
ASPECT
50
50
50
WIDE
Note:Only under the Standard Mode, you could adjust the parameter of Brightness/
Contrast / ECO/DCR by yourself.
!

2019 ELECROW All Rights Reserved.
C8
Color Temperature
OSD Setting
• The color temperature function contains three preset color modes (Cool/Warm/User) . When you
select the color temperature as Cool/Warm, its corresponding red/green/blue values will also be
displayed below. And only under the User Mode, the parameter of RED/GREEN/BLUE could be
adjusted by user.
OSD SETTING
LANGUAGE
OSD H. POS .
OSD V. POS .
OSD TIMER
TRANSPARENCY
50
50
10
0
COLOR TEMP .
COLOR TEMP .
50
RED
GREEN
BLUE
50
50
USER
• Language: Select the OSD language.
The selections are: English, French, German, Simplified Chinese, Italian, Spanish, Dutch, Portugal, Turkish,
Polish, Japanese, Korean.
• OSD H. POS.: Adjust the horizontal position of OSD menu and the adjusting range is from 0 to 100.
• OSD V. POS.: Adjust the vertical position of OSD menu and the adjusting range is from 0 to 100.
• OSD Timer: Adjust OSD timeout from 5 to 60.
• Transparency: Adjust the transparency of OSD menu and adjusting range is from 0 to 100.

2019 ELECROW All Rights Reserved.
C9
Reset
Misc
• Signal Source:Adjust the signal source to“HDMI ” or “VGA”.
• Low Blue Light:The adjusting range is from 0 to 100.
• Volume:Adjust the volume in the range of 0-100.
• Selects “Yes”to revert all settings to the factory default mode.
RESET
IMAGE AUTO ADJUST
COLOR AUTO ADJUST
RESET
MISC .
SIGNAL SOURCE
VOLUME
1920X1080 60HZ
50
HDMI
0
LOW BLUE LIGHT

2019 ELECROW All Rights Reserved.
C10
Chapter 04 Specifications
Chapter 05 Troubleshooting Guide and Warranty
5-1. Troubleshooting Guide
• This page deals with problems that can be corrected by a user. If the problem still persists after you
have tried these solutions, please contact customer support.
Model Name
Panel Size
Aspect Ratio
Brightness
Contrast
Resolution
Viewing angle
Vertical Frequency
Supported Resolutions
Power Source
Display Area(H*V)
Phys. Dimension (WxHxD)
Net Weight (Esti.)
SF116
11.6 inch
16:9 (W:H)
300 cd/m²
800:1(Min.)(TM)
1920*1080
85/85/85/85 (Min.)(CR≥10)
60Hz
1920*1080@60Hz for FHD mode
DC 5V (+/-0.6V) or USB 5V
257*145mm
288*185*25mm
660.6g

2019 ELECROW All Rights Reserved.
C11
5-2. Warranty
• ELECROW Monitors carry a one (1) year limited warranty from the purchase date. In order to
receive warranty service, proof of purchase of the ELECROW product is required. To obtain warranty
service, please contact Customer Support.
• This limited warranty does not cover for:
Improper installation or maintenance; Misuse or Neglect; Repair, modification, or installation of
options or parts by you or any third party; Improper environment- Excessive or inadequate
heating or air conditioning or electrical powers failures, surges or other irregularities; Fire, flood,
earthquake or other accidents.
Problem
No Power
No Picture/No Signal
No Sound
Dark/Light Picture
Image is Blurred
Possible Solutions
1. Make sure the power cord is plugged properly.
2. Press the power button to check if the monitor is ON.
1. Check whether the monitor and the signal output device are in
the ON mode.
2. Reconnect the signal cable.
3. Check if the signal is matched with the input function.
4. Connect another available output device/signal cable/monitor
to check whether the issue is caused by the output device
hardware, the video signal to the monitor or the monitor itself.
1. Adjust the volume settings via the button.
2. Check whether the headphone is inserted.
3. The silencer is working.
Adjust the Brightness settings via the button.
Select the correct resolution.
5-3. Customer Support
• If you have any questions, customer support is always stand by.
@[e-mail] @elecrow