Electra Basic TL User manual

safety & comfort for your family
1
TOUCH LINE Video-audio Intercoms
for blocks of flats
USER MANUAL
The functioning of the TOUCH LINE outdoor panels for BLOCKS OF FLATS
Basic TL audio panel Evolution TL audio panel Evolution TL video panel
with surface mounting with surface mounting with flush mounting
Basic TL outdoor panel
1. The panel in stand-by mode
The keyboard of the outdoor panel is permanently lighted.
At the models with inhabitant list display module, the list is also permanently lighted.
2. How to make the call?
Any visitor must ask permission to enter. The visitor must dial the number of the apartment he is looking for.
The TOUCH keyboard is a graphic representation on the GLASS surface of the outdoor panel, and the call is selected
through a simple touch of the printed surface. The touch of the key must be maintained approx. 0,5 s until the command is
confirmed by an acoustic signal (beep). The keyboard only reacts to the contact with the human body and it will not be activated
if it is touched with a glove on the hand or with another object.
After dialing the number, the panel calls the indoor terminal associated with it. The call is acoustically signaled.
If the inhabitant answers, the communication with the interior is initiated. If the inhabitant does not answer, the call is automatically
cancelled after 40 sec.
The call is cancelled with the key.
3. How to use the access tag ?
Approach the tag the area of the outdoor panel that is marked with the symbol. If the tag was programmed on the panel, the
lock opens. Otherwise, the panel emits an acoustic error signal, and the door remains locked.
The operating distance of the access tag is 10 ... 20 mm.
Orientable video camera
Lighted TOUCH keyboard
Proximity tag access
Inhabitant list display
(optional)
GLASS surface
Infrared lighting LEDs
Electronic display: 4 rows

safety & comfort for your family
2
Evolution TL outdoor panel
1. The panel in stand-by mode
The keyboard of the outdoor panel is permanently lighted. The LCD display is also permanently lighted and it displays the address of the
building and use instructions for the panel.
For the panels with an integrated video camera, a blinking red lighted LED signals the presence of the camera, indicating that the entrance
may be monitored at any time.
The LCD display in stand-by mode
Main message:
L
I
B
E
R
T
Y
S
T
R
.
6
B
L
O
C
K
5
E
N
.
A
D
I
A
L
N
O
.
O
R
S
E
A
R
C
H
w
i
t
h

,

It can optionally alternate every 3 s with a display of other
messages, for example:
I
N
S
T
A
L
L
E
R
S
C
E
L
E
C
T
R
A
S
R
L
I
A
S
I
t
e
l
:
0
7
9
0
1
2
3
4
5
6
2. How to make the call?
Any visitor must ask permission to enter.
If the visitor knows the number of the apartment he is looking for, he can dial it directly, using the numeric keyboard.
If he does not know the number of the apartment, he can use the orkeys to search the electronic list. When he finds the desired
apartment, he must press the key. With the key the end of the list can be reached.
The TOUCH keyboard is a graphic representation on the GLASS surface of the outdoor panel, and the call is selected
through a simple touch of the printed surface. The touch of the key must be maintained approx. 0,5 s until the command is
confirmed by an acoustic signal (beep). The keyboard only reacts to the contact with the human body and it will not be
activated if it is touched with a glove on the hand or with another object.
After dialing the number, the panel calls the indoor terminal associated with it. The call is acoustically and visually signaled - on the display,
the number of the apartment and the name of the called inhabitant blink intermittently.
If the inhabitant answers, the communication with the interior is initiated. If the inhabitant does not answer, the call is automatically
disconnected after 40 sec.
The call is cancelled with the key.
During use, the display shows additional instructions, indicating the status of the functioning: conversation, granting access.
The LCD display during functioning
Touch a numeric key. The first displayed text is:
_
_
_
D
I
A
L
N
U
M
B
E
R
F
O
R
I
N
C
O
R
R
E
C
T
D
I
A
L
p
r
e
s
s
1, 2 or 3 digits can be dialed. For example, for apartment no. 1: 1, 01, or 001 can be dialed.
If 1 or 2 digits are dialed, the panel will call the indoor terminal with a short delay of 3s.
If 3 digits are dialed, row number 1 is filled with in the name (made of 12 letters, if they exist) and the panel will call the terminal
directly.
If an arrow key is pressed, it returns to the original display.
Touch an arrow key:
0
0
1
:
S
m
i
t
h
A
0
0
2
:
J
o
h
n
s
o
n
I
0
0
3
:
M
i
c
h
a
e
l
s
C
C
h
o
o
s
e
n
a
m
e
b
y


When pressing the key, the panel calls the indoor terminal.
0
0
2
:
J
o
h
n
s
o
n
I
C
o
r
r
e
c
t
?
P
r
e
s
s
W
r
o
n
g
?
P
r
e
s
s

,

The apartments and the displayed names will be the ones positioned at the beginning or the end of the list, depending on which arrow key
is pressed. After pressing oryou can navigate through the list and, at 3s from the last stroke of an arrow key, the number of the
apartment and the name of the inhabitant must appear.
Display during call:
0
0
2
:
J
o
h
n
s
o
n
I
W
A
I
T
Display during conversation:
0
0
2
:
J
o
h
n
s
o
n
I
C
O
N
V
E
R
S
A
T
I
O
N

safety & comfort for your family
3
The inhabitant press the ACCESS key:
0
0
2
:
J
o
h
n
s
o
n
I
C
O
M
E
I
N
If the conversation time is up:
0
0
2
:
J
O
H
N
S
O
N
I
D
I
A
L
A
G
A
I
N
After the lock is closed, the panel returns to stand-by mode.
Messages for potential defects:
N
u
l
l
t
e
r
m
i
n
a
l
D
i
s
c
o
n
n
e
c
t
e
d
o
r
u
n
p
r
o
g
r
a
m
m
e
d
t
e
r
m
i
n
a
l
L
a
c
k
o
f
d
i
g
i
t
a
l
c
o
m
.
C
o
n
n
e
c
t
i
o
n
p
r
o
b
l
e
m
s
3. How to use the access tag ?
Approach the tag to the area of the outdoor panel that is marked with the symbol. If the tag was programmed on the panel,
the lock opens. Otherwise, the panel emits an acoustic error signal, and the door remains locked.
The operating distance of the access tag is 10 ... 20 mm.
The LCD display during the use of the access tag
Recognized tag:
C
O
M
E
I
N
or unrecognized tag:
W
R
O
N
G
C
O
D
E
The functioning of the TOUCH LINE indoor terminals
Basic TL audio terminal Evolution TL audio terminal Evolution TL video terminal
The TOUCH keyboard is a graphic representation on the GLASS surface of the indoor terminal, and the call is selected
through a simple touch of the printed surface. The touch of the key must be maintained approx. 0,5 s until the command is
confirmed by an acoustic signal (beep). The keyboard only reacts to the contact with the human body and it will not be
activated if it is touched with a glove on the hand or with another object.
1. The indoor terminal in stand-by mode
In stand-by mode, the TOUCH keyboard is not lighted. For the video terminals, the display is also not lighted.
Only in the case in which the audio volume is TURNED OFF, the VOLUME key is permanently red lighted.
At the first touch, the keyboard exits the stand-by mode and is completely lighted, waiting for the selection of the desired function.
If no function is selected, the keyboard will automatically turn off after 6 sec.
GLASS surface
ACCESS key
Duplex hands-free (without handset)
3,5”or 2,4”color
LCD display
ON/OFF key
AUX key
VOLUME key

safety & comfort for your family
4
2. Call, conversation
When someone calls from the outdoor panel, the indoor terminal rings and the keyboard is completely lighted.
The ON/OFF key blinks, signaling that it is the first one that needs to be pressed.
At the video terminals, the image transmitted by the video camera from the panel appears on the display.
To talk to the person at the entrance, press the ON/OFF key only once. Afterwards, the conversation takes place freely,
without having to press the key again, or to hold a handset (hands-free duplex communication).
By pressing the ON/OFF key only once, the conversation can be ended. In any case, the conversation is ended automatically
after 2 min.
3. Granting access
To open the access door (after call and conversation), press the ACCESS key.
If you do not wish to initiate, or to end the conversation voluntarily, the terminal will automatically disconnect after 15 sec.
4. VOLUME ADJUSTMENT and TURN OFF mode
The volume of the ringing bell is adjusted on several levels, through the use of the VOLUME key.
If this key is pressed successively, the volume of the audition successively passes through the TURN OFF - 1 - 2 - 3 - 2 - 1 - TURN OFF
levels.
The TURN OFF mode is signaled by the lighting of the VOLUME key, which is permanently red, both in stand-by mode, and
during use.
5. Monitoring (only for the TOUCH LINE Evolution video terminals)
The space in front of the entrance can also be visualized when the video terminal is not called, by pressing the ON/OFF key.
The duration of the monitoring is 6 sec.
If several video cameras are connected to the installation, the images can be viewed one at a time, the camera being shifted
through the successive touch of the ON/OFF key.
The monitoring is not possible if another terminal from the installation is called or during conversation.
6. Auxiliary command - turning on the light (only for TOUCH LINE Evolution)
The indoor terminal also has the option of an auxiliary command - the AUX key - for this additional application. This function
can be used if a lighting device is connected to the installations.
7. The personalization of the ringtone (only for TOUCH LINE Evolution)
You have the possibility to choose your favourite ringtone from 3 options. The selection procedure is:
a. Simultaneously press the ACCESS and AUX keys. The terminal enters the ringtone selection mode.
b. Then successively press the VOLUME key, to listen to the available ringtones.
c. The last heard option is automatically programmed if the key is not pressed again after 5 sec.
8. Signaling the open access door (only for TOUCH LINE Evolution)
In the case in which the electromagnetic lock installed at the access door is the YEM.21x model from ELECTRA (the smart lock),
there is an extra option for increasing the security level. Thus, when the entrance door remains open, for certain reasons, the
key from the indoor terminal blinks, indicating that the door must be closed.
Maintenance
The TOUCH LINE outdoor panels and the indoor terminals have a front screen made of glass. They must be kept away from: water,
lime or any other liquid substances; mechanical shocks; corrosive vapors; dust; etc. The products can be cleansed with a soft cotton
cloth, soaked very little in water and detergent.
The access tags are made of plastic and they must be kept away from: dissolving substances, sources of heat, mechanical shocks.

safety & comfort for your family
5
Warranty
A warranty of 24 months is granted, but no more than 28 months from the production date (according to existing legislation), in the
case of using the device according to these instructions. Warranty is not granted for: inappropriate use, intentional damage, theft,
fire, natural disasters, unauthorized interventions to the system, the lack of protection in case of renovation. For the warranty to be
granted, the product must be accompanied by the proof of purchase.
The access tags/cards are expendable materials and they are not granted warranty. Within 30 days’ time from the start-up of the
device, the tags/cards that are delivered by ELECTRA and have a production defect are replaced for free.
Technical features of the installation
Power tension 230V/50 Hz, ± 10%/ max. 0,2A
Functioning temperature for the parts on the exterior of the building: - 20...+40 oC
Functioning temperature for the parts on the exterior of the building: - 20...+40 oC
The ELECTRA TOUCH LINE audio-video intercom installations are produced in compliance with the European standards in the
field of security and electromagnetic compatibility and are bearing the CE mark.
Expected life time: 8 years
In the European Union, this symbol signifies the fact that after the equipment is out of use it becomes a waste (WEEE) that is not thrown as
solid waste or municipal waste, but is selectively collected and handed over to WEEE collecting centers.