Electra evolution User manual

KIT VIDEO DOOR PHONE evolution
2 families
Call from the Outdoor panel keys;
Possibility to see on the Terminal's display the person calling ;
Full duplex hands-free audio communication;
Command of the access gate/door opening from the indoor Terminal ;
Video and audio monitoring of the entrance of the property, by the inhabitant;
Optional connection of up to 4 additional video cameras;
Optional auxiliary command: auto-access, garage door, etc.;
Optional 1 video Terminal or up to 3 audio Terminals in parallel, for each family;
Optional maximum 3 Outdoor panels in parallel;
.UTP CAT 5e (AWG 24) cable required
Harry Johnston
Oliver Thompson
USER MANUAL EN

02
1 KIT COMPONENTS
Outdoor panel
1 pc.
294 × 144 × 53 mm
Indoor terminal
2 pcs.
212 × 96 × 30 mm
Supply control unit
1 pc.
130 × 141 × 73 mm
Access tag
10 pcs.
35 x 62 x 7 mm
Video connection box
1 pc.
100 × 71 × 60
Supply tension of the system
(supply of the control unit)
Video communication
230 V±10% / 50 Hz
0,4A AC
Audio communication Full-duplex
Data communication Digital
Analog video signal
Maximum power expenditure
from the 230 V AC network
2 TECHNICAL FEATURES OF THE SYSTEM
Supply tension 12,0 ... 14,3 V DC(stabilized)
Steerable video camera module
- CCD, 1/3”, 573(H) x 597(V) pixel resolution;
420 TV Lines;
- angle of visualization: 96° horizontal, 45° vertical;
- video signal: 1Vvv/75 PAL;
- presence of video camera – 1 RED LED,
intermittently on;
- left-right rotation angle: ± 25°
13 LED's = 850 nm; 7mW/sr per LED radiated
luminous intensity
Infrared illumination
2.1 Technical features of the Outdoor video panel
Harry Johnston
Oliver Thompson

03
EN
2.2 Technical features of the video Terminal
Supply tension 12,0 ... 14,3 V DC(stabilized)
Keyboard Permanent RED signaling of the VOLUME key if the
terminal is turned off.
Adjustments
Audio communication volume:
MAXIMUM LEVEL – MEDIUM LEVEL – TURNED OFF
- Image characteristics: luminosity, chrominance, video
impedance adjustment
TOUCH type,4 keys Backlit on touch
3.5” or 2.4” LEC, TFT, resolution: 320 x RGB x 240;
Display Up/down/right/left visibility angle: 10/35/50/50
Display
Range of transport and storage
temperatures - 33°C ... + 55°C
Dimensions
Weight 0,4 kg
212 x 96 x 30 mm
Operating temperature range 0°C ... + 45°C
Case ABS Glass screen, 3 mm thick
Mounting Surface
Casing protection level (IP) IP31
Display of the inhabitant's name
Case Aluminum profile painted in electrostatic field;
Secured glass screen, 8 mm thick
Mounting Flush
Keyboard TOUCH type, permanently backlit
Casing protection level (IP) IP44
Operating temperature range - 30° C ... + 60°C
Transport and storage
temperature range - 33° C ... + 55° C
Dimensions 294 x 144 x 53 mm
Weight 1,52 kg
Backlit name space

04
2.3 Technical features of the Supply control unit
Supply tension
+14V - GND : +14V DC (stabilized)/ 2A DC
+ Uv GND : +14V DC -
Vcam GND : +12V DC -
(stabilized)/ 0.5A DC
(stabilized) / 0.4A DC
Generated power tensions/
power capability
Case
Mounting
Fireproof ABS
- On DIN rail: TH 35 x 15 or 35 x 7,5 in compliance
with DIN46277-3, EN50022, IEC60715
- Surface: with A3,5 x 32 plastic screws and
ø 6 mm pins
Casing protection level
Operating temperature range
IP31
0°C ... + 45°C
Transport and storage
temperature range
Dimensions
Weight
- 33°C ... + 55°C
130 x 141 x 73 mm
0,4 kg
230V±10%/50Hz
Outputs (derivations)
-On DIN rail: TH 35 x 15 or 35 x 7,5 in compliance
with DIN46277-3, EN50022, IEC60715
-Surface: with plastic screws and pins
2
Case ABS
Mounting
0,21 kg
100 x 71 x 60 mm
Casing protection level (IP) IP31
Operating temperature range 0° C ... + 45° C
Range of transport and storage
temperatures - 33° C ... + 55° C
Dimensions
Weight
Main input – output 1
2.5 Technical features of the Video connection box
Functioning frequency 125kHz
2.5 Technical features of the Access tag

3 BLOCK DIAGRAM OF THE SYSTEM
Main
terminal
6
/
6
/
Additional
terminal 1
From the
video
connection
box
All additional products are sold separately.
3
/
3
/
Additional
terminal 2
Additional
terminal 3
Additional terminals in parallel (optional)
For more than 1 external video camera and outdoor panels in parallel, a video selection
box is necessary.05
ACC
12V/1,3Ah (Optional)
Supply
control
unit
Terminal 1
Panel
OUTDOOR INDOOR
230 V AC
/
6
/
2
/
3
/
4
/
3
/
6
Terminal 2
/
6
/
6
Video
connection
box
EN
Accumulator
Electromagnetic
lock DC / AC
External
Video Camera
(Optional)
(Optional)
Case
Reading distance
ABS
25 mm
Casing protection level (IP)
Operating temperature range
IP 65
-30°C ... + 60°C
Range of transport and storage
temperatures
Dimensions
Weight
- 33°C ... + 55°C
35 x 62 x 7 mm
7,5 g
1 out of 1.099.511.627.700
Harry Johnston
Oliver Thompson

4.1 Recommended cables
Outdoor panel Supply control unit
UTP CAT5e (AWG24) cable for distances of maximum 70 m between the outdoor panel and
the supply control unit and 250m between the outdoor panel and the video terminal.
For distances greater than 250 m, please request additional information from the producer.
Video terminalVideo connection box
06
To the video
Terminal
/
6
/
6
Panel
Supply control unit
/
4
/
4
/
4
/
4
/
6Video selection box
3.2 Block diagram of the connection of additional Outdoor
panels (optional)
INSTALLATION4
To the video Terminal
Video selection box
Panel 1 Panel 2Panel 3Panel 4
/
6
Supply
control
unit 3
Supply
control
unit 2
Supply
control
unit 4
Supply
control
unit 1
/
6
/
6
/
6
/
6
/
6
/
6
/
6
/
6
3.1 Block diagram of the video selection box connected with
4 additional video cameras (optional)
Harry Johnston
Oliver Thompson
Harry Johnston
Oliver Thompson
Harry Johnston
Oliver Thompson
Harry Johnston
Oliver Thompson
Harry Johnston
Oliver Thompson

07
EN
Supply control unit
Flexible, multistrand cable, (Cu) 2 or 3 x 0,75 mm² for distances of maximum 50 m or
(Cu)2 or 3 x 1 mm² for distances of maximum 100 m.
Electromagnetic lock (optional)
Supply control unit
Flexible, multistrand cable, (Cu) 3 x 0,75 mm²
230 V AC network
External video camera (optional)
UTP CAT5e (AWG24) cable for distances of maximum 200m between the external video
camera and the Supply control unit.
ATTENTION! Because the signal output of the video camera is on a coaxial cable, a balun
adapter will be used for the passage from a coaxial cable to AWG24 cable, installed between
the signal output of the video camera and the Vin2 and GNV2 inputs of the Supply control unit.
Supply control unit
èATTENTION! The installation, the connection to the 230V/50 Hz network and
the maintenance of the Supply control unit will only be carried out by
authorized personnel!
èThe installation of the Supply control unit is recommended to be made within
an electrical panel.
è ATTENTION! DO NOT UNFASTEN THE FRONT LID! DANGER OF ELECTRIC
SHOCK! Only the protection lids of the connections can be unfastened.
èATTENTION! It is mandatory for the supply of the Supply control unit from the
230 V/50Hz network to be made through two automatic fuses of 10 A (on
phase and null). The connection of the F and N terminals of the Supply control
unit will be made through two isolated (Cu) wires, with a section of 0,75mm²
è ATTENTION! During the installation, connection of the Supply control unit at
the 230 V/50Hz network and during service, the safety fuses from the panel
must be opened. (POWER OFF)
èThe connection of the (Cu) 0,75mm² grounding wire between the grounding
terminal of the electrical panel and the grounding terminal of the Supply
control unit is MANDATORY.
èIMPORTANT! Before connecting the Supply control unit's supply fuses, check
the precision of the connections in the system. Check both visually, and by
measurement with an ohmmeter.
èIMPORTANT! Install the protection lids of the Supply control unit's connections
before connecting the 2 supply fuses (230V/50Hz).
èPAY ATTENTION to the polarity of the terminals when connecting them to the
Supply control unit of a buffer accumulator (max. 7 Ah). The inversion of the
terminals leads to the failure of the accumulator. The installation and
connection of the accumulator will be carried out by authorized personnel.
èDO NOT TOUCH the wires exiting from the connectors and the terminals of the
control supply unit. Disconnect the fuses (10 A) from the supply's phase and
null of the Supply control unit.
èATTENTION! Do not supply components of the installation separately (Outdoor
panel, Terminals etc.) at tensions higher than 15V DC or directly from the
network (230V/50Hz). DANGER OF ELECTRIC SHOCK and of the door phone
system's destruction.
4.2 Safety instructions for installation

4.3 Installation of the Supply control unit
DIN rail mounting Wall mounting
RetainerDIN rail
1
2
3A3,5 x 32 screw (2 pcs.) B2,9 x 9,5 screw (4 pcs.)Protection lid (2 pcs.)
The accumulator will be connected to the terminals of the power supply, after the
commissioning of the system.
4.4 Installation of the Video connection box
Retainer
DIN rail
1
2
A3,5 x 32 screw (2 pcs.) B2,9 x 9,5 screw (4 pcs.)Protection lid (2 pcs.)
DIN rail mounting Wall mounting
08
Frontal view Lateral view Back view
Frontal view Lateral view
Back view

09
The terminal will be placed at the
155cm height (recommended height)
4.5 Installation of the video Terminal
Before starting...
1
2
A3,5 x 32(35) screw
(4 pcs.)
Cable retainers
– adapters
≈18 cm
Cable length
(from the wall)
4.6 Installation of the Outdoor panel
The Outdoor panel is installed at the entrance of the property or building, on the body closest
to the access door, at a height of approx. 1.7 m (upper part) from the ground, protected from
rain and sunrays.
Lateral viewFrontal view Back view
The Outdoor panel keys numbering is from the bottom up, the first key meaning address 1.
EN

10
Before starting...
The Outdoor panel
is installed at the
entrance to the
building, on the
body closest to
the entrance door.
Detail of camera adjustment
Customization of the name display
Remove the plastic pad from the
keyboard module Affix a sticker with the name, cut to size, on the white space allocated to it. Insert the pad back into the
keyboard module
frontal view lateral view back view
Door phone cable
Antitheft protection
12 3
Torx
Screw
The Torx screw must be completely screwed. Otherwise, when the system is powered, the panel emits a permanent acoustic signal.
This warning function is useful if an unauthorized person tries to open the Outdoor panel. The alarm turns on immediately after one starts
to unscrew the Torx. The function is turned off during the programming of the panel’s parameters.
2,5 x 8 mm screw
Video camera angle
adjustment
Torx Screw
for antitheft protection

EN
PROG
CONNECTION DIAGRAM
5
BROWN
GREEN
BLUE
ORANGE
External video
camera
GREEN
ORANGE
BLUE
GREEN
Accumulator
Cable
2 x 0,5 mm
ACC
12
V
/
7 Ah
Electrical panel
230 V AC/50Hz
Cable
3 x 0,75 mm
+1
4V
CD
IN
GND
P
Vi
n
1
GNV 1
GNV
2
Vin 2
Vcam
GND
+14
V
CD
OUT
GND
+Uv
Vout
GNV
BUT
LC
LA/C
LA
AU
X
2
AUX 1
F
N
-ACC
+ACC
.VDN.xxy
Supply control unit
BROWN
BROWN
ORANGE
BLUE
BROWN
ORANGE
BLUE
+1
4V
CD
GND
P
UTP CAT 5e
(AWG 24)
2x Sig. 10A
Vout
GNU
GREEN
UTP CAT 5e
(AWG 24)
Panel
(Optional)
INDOOR
OUTDOOR
Connected- without exterior camera
Not connected - with exterior camera
Doorbell
GREEN
ORANGE
BLUE
Vi
n
GNV
Vout
C
D
GND
+Uv
Db
l
+14V
BROWN
Terminal 1
Doorbell
GREEN
ORANGE
BLUE
V
in
GNV
Vout
CD
GND
+Uv
D
bl
+14V
BROWN
Terminal 2
+14V
in-out
CD
in-out
GND
in-out
GND
in-out
+14V
1+2
CD
1+2
GND
1+2
+Uv
1+2
Vout
1
GNV
out
GNV
1
Vin
in
Vout
2
GNV
in
GNV
2
+Uv
in-out
Vo
u
t
o
ut
GND
1+2
BLUE
BROWN
GREEN
ORANGE
ORANGE
BLUE
BROWN
GREEN
BLUE
BROWN
GREEN
ORANGE
Video conection box
UTP CAT 5e
(AWG 24)
(Optional)
UTP CAT 5e
(AWG 24)
Door Opening Button
DC Electromagnetic lock (Optional)
or
AC Electromagnetic lock
Auxiliary command
see ch. 5.3 Connection of
one external video camera
(Optional)
(Optional)
(Optional)
UTP CAT 5e
(AWG 24)
11

12
COMMISIONING OF THE SYSTEM
6
6.1 Description of the supply control unit
TIME:
Lock timing adjustment
The Supply control unit includes:
Protection lid for the
connections
Protection lid for the
connections
Front lid
LED signaling of programming /
defect within the system
*PROG. : programming button S2: existence of tension at the
+Uv - GND terminals
S1: presence of tension at the
+14V - GND terminals
*The kit does not require programming.
This button is used only if you add
additional Terminals or panels to the
system.
5.1 Installation of the electromagnetic lock
Direct current (DC)
Direct current
electromagnetic lock (DC)
LC2
Cable
2 x 0.75 mm
BUT
LC
LA/C
LA
Supply control unit
LC1
Cable
2 x 0.75 mm
Alternative current
electromagnetic
lock (AC)
BUT
LC
LA/C
LA
Transformer
12 V230 V AC
Supply control unit
Alternative current (AC)
ŸThe Supply control unit can supply a current of max. 1A
for the supply of the lock.
ŸThe tension of +14 V DC is present on the LC terminal of
the Supply control unit.
ŸThe connection of a lock actuating button from the
interior of the building will be made at the BUT and LC
terminals of the Supply control unit.
(optional)
AC
GND LA
AUX 2
AUX
1
Automation
Relay contact
Maximum switched current: 1.5 A
5.2 Connection of the auxiliary command (optional)
GNV 2
Vin 2
Vcam
GND
BUT
LC
LA/C
LA
AUX 2
AUX 1
5.3 Connection of one external video camera (optional)
External
video camera
V/(+)
Supply control unit
Jumper
G/(-)
Video Balun
BROWN
GREEN
BLUE
ORANGE
BLUE
BROWN
UTP cable
CAT 5e
Not connected - with exterior camera
ORANGE
GREEN
Core Cable (for power)
If in a system you want to install more than one External video camera, you need to connect it to the Video
Selection Box (VSB.4DN.BLW)
Coaxial Cable
(video signal)
BNC
connectors
RCA
connectors Braid (GND)
Central Conductor
(+12V)
Maximum output current from
the Supply Control Unit to power
a video camera is of 0,4 A
ŸThe Supply control unit can supply a
current of max. 1A for the supply of the
lock.
PROG

How to adjust the audition level of the video Terminal:
Through consecutive touches of the VOLUME key, different audition levels are obtained: OFF
(mute) – red LED, MEDIUM white-red LED, MAXIMUM – white LED
After checking leave the Terminal on open volume position (white on).LED
EN
13
6.3 Checking the functions and adjustments
Check anywhere in the installation, during the call and the communication, and make sure
that the +14V – GND and +Uv – GND supply tension is higher than 12,0V.
Check the functions of the Terminals and of the Outdoor panel: call, communication, access,
audio and video monitoring. The system is adjusted by the producer in what concerns the
audio part, for standard functioning conditions.
How to adjust the image characteristics on the video Terminal:
If due to the type of system (type of cable) the image on
display is not qualitative, successively adjust (on the back
of the Terminal) until the maximum result is obtained,
in the following order:
1. Impedance adjustment;
2. Luminosity;
3. Chrominance.
Any intervention in the system will be made with the system disconnected from the 230V AC
supply network (the phase and null fuses are opened) and from the accumulator (the +ACC
terminal is disconnected).
6.4 Troubleshooting
Check the existence of the supply tensions with the values mentioned below, at the terminals
of the Supply control unit (use a direct current voltmeter)
Ÿ Tensions measured at the terminals of the Supply control unit :
+14V – GND /13,8 … 14,3V DC
+Uv – GND /13,5 … 14,3V DC
Ÿ Tensions measured at the terminals of the Outdoor panel and at the terminals of the
Terminals: anywhere in
the system
+ 14V - GND min. 12 V DC
+ Uv - GND min. 12 V DC
If necessary,
adjust the image of the Terminal :
• In case of an unclear image, adjust:
IMPEDANCE ADJUSTMENT 6
• For color or brightness, adjust
CHROMINANCE 4
LUMINOSITY 5
Make sure that the Torx screw of the Outdoor panel is completely screwed to prevent turn
ing on the anti-theft alarm.
Connect the Supply control unit to the 230 V AC network, by connecting the two automatic 10A
fuses, installed on phase and null.
Optionally, connect the accumulator to the +ACC and –ACC terminals of the Supply control unit.
PAY ATTENTION to the polarity of the accumulator!
Check the precision of the connections in the system!
The +14V , GND , CD , GNV and Uv signals are common to all components of the system.
The Vin and V out signals are specific to each Terminal or video camera (they are not to be
connected jointly).
Any short circuit between them leads to the non-operation of the entire system.
6.2 Checking the precision of the connections in the system and the
connection of the Supply control unit

14
Short circuit in
the system
between +14V
and GND
Control unit:
S1: green
S2:
PROG:
There is no image on
the display, the
system functions only
on audio mode
3
Identify the spot of the short
circuit.
Remedy the defect and turn
the system on.
4The CALL does not
function
Control unit:
S1: green
S2: green
PROG:
Terminal:The keyboard
is functioning, it does not
take the call command.
Outdoor panel:
Emits an error signal .
No CD connection
at the terminals of
the Terminal, or CD
wire interrupted
before reaching the
terminals of the
Terminal.
Connect the CD to the
Terminal or check the
continuity of the CD wire
from the audio connection
box to the Terminal.
The system does not
Function (Supply
control unit without
accumulator)
2
Control unit:
S1: intermittent green
S2:
PROG:
Identify the spot of the
short circuit.
Remedy the defect and turn
the system on.
Control unit:
S1: green
S2: green
PROG: intermittent
red
Terminal: The keyboard
is functioning, it does not
take the call command.
Outdoor panel:
Emits an error signal
The CALL does not
function Remedy the short circuit.
(by case)
Short circuit
between the CD
and GND , +14V
connections.
5
6
Control unit:
S1: green
S2: green
PROG:
During call or
monitoring there is
no image on the
screen of the
Terminals.
All the other
functions of the
system are active
- Check the +Uv
connection between the
Supply control unit – Video
connection boxes –
Terminals.
- Locate and remedy the
defect.
- Lack of tension
between the +Uv and
GNV terminals of the
Terminals
- Lack of Vout
connection at the
terminals of the
Outdoor panel or at the
Vin or Vout terminals
of the Supply control
unit.
The system does not
function
(Supply control unit
without accumulator)
Lack of tension from
the 230V AC network
1
Check the 10A fuses from
the electrical panel and
the 1,6A Fuse 1 from the
Supply control unit input.
Check the continuity of the
supply cables.
Control unit:
S1:
S2:
PROG:
Short circuit in the
system between
+Uv and GNV .
Problem Signaling Solutions
No. Possible causes
The system functions
correctly
0
Control unit:
S1: green
S2: green
PROG:

15
EN
The system functions
(Supply control unit
with accumulator)
The accumulator is
in charging mode
9ok
8
At a repeated
monitoring
command on any
video Terminal
installed, the image
disappears (black LCD
screen)
Connect the JP1 jumper.
Check that at a repeated
monitoring command, the
image on the Terminal's
screen remains unchanged.
The system functions
(Supply control unit
with accumulator)
Defect accumulator
or discharged
10
The system functions
(Supply control unit
with accumulator)
Lack of tension from
the 230V AC network
The system
functions powered
by the accumulator
11
Replace the
accumulator
Check the 10A fuses from
the electrical panel and the
1,6A Fuse 1 from the Supply
control unit input.
Check the continuity of the
supply cables.
7 USE
Do not hit the glass screen with hard objects!
If the front glass screen cracks, DO NOT touch the product!
7.1 User safety instructions
The JP1 jumper on the
Supply control unit is
NOT
CONNECTED, at each
stroke of the
MONITORING key ,
the image on the
screen of the Terminal
will change from the
image sent by the
video Outdoor panel to
off screen (there is no
video signal
connected to the Vin2
input of the Supply
control unit)
Control unit:
S1: green
S2: green
PROG:
Control unit:
S1: intermittent red
– green
S2: green
PROG:
Control unit:
S1: intermittent red –
green
S2: green
PROG:
acoustic signal
Control unit:
S1: red
S2:
PROG:
During the call and/or
communication, the
image on the
Terminal's screen
presents horizontal or
oblique lines, fixed or
mobile (moar)
Control unit:
S1: green
S2: green
PROG:
7
Locate and remedy the
defect.
The wires connected
to the Vin / Vout and
GNV terminals are not
twisted until close to
the terminals (until
approx. 1 cm from the
terminals).

16
3 ACCESS
After the command, the lock is unblocked for 1...10 s for the access of the
visitors.
// You cannot grant access without having a prior communication. .
2 CALL AND COMMUNICATION
Call duration: maximum 15 s (3 calls)
Communication duration: maximum 2 min.
The LED of the key blinks and the display shows the image sent by the video
camera of the Outdoor panel. By touching the key, communication is initiated.
The LED does not blink anymore
Do not touch the key during communication.
END COMMUNICATION
NO ACCESS!
The second touch of the key ends communication without granting access and
the Terminal returns to stand-by mode.
7.2 Use of the video Terminal
1 STAND-BY
The keyboard is not backlit.
At the first touch, the keyboard is backlit and the Terminal may receive the
following commands:
AUDIO – VIDEO MONITORING
+VIDEO CAMERA SELECTION
Monitoring duration: 10 s
By touching this key, you may see and listen to what goes on at the entrance, in
front of the Outdoor panel. Monitoring is not possible if another Terminal of the
system is being called or is during communication.
// If several video cameras are installed within the system, the successive stroke
of the key changes the camera through which the monitoring is done.
VOLUME ADJUSTMENT OR
“TERMINAL TURNED OFF”
By successive touches of this key, the 3 volume levels are passed through:
maximum (white LED), medium (red-white LED) and turned off (red LED). The red
LED will remain permanently turned on until the key is pressed again.
ANSWER THE CALL
ACCESS and
END COMMUNICATION!
No matter what the state of the Terminal is: monitoring, call or
communication, this key may action an automation connected to the
system: auto access or garage gate, lighting system etc.
4 COMMAND AUX
AUXILIARY COMMAND
Stand-by
Call
Communication

17
EN
7.3 Use of the Outdoor panel
1 STAND-BY
The key of the Outdoor panel and the inhabitant’s name are permanently backlit.
The intermittent RED led signals the presence of video monitoring.
2 CALL AND COMMUNICATION
Call duration: maximum 15 s ( 3 calls)
Communication duration: maximum 2 min.
Touch the key .
The call to the inhabitant is signaled acoustically. You may end the call by
pressing again the key . If the inhabitant answers, communication is initiated.
If access is granted, the panel emits an acoustic signal, and the lock remains
unblocked for maximum 10 seconds. If the inhabitant does not answer, after a
minute, the panel returns to stand-by mode.
The symbol indicates the RFID tag reading area.
7.4 Use of the Access tag
Step
1Supply control unit PROG Long stroke of PROG.
The red LED is on.
The tags are already memorized. When used, the panel emits a recognition acoustic
signal and the symbol blinks green.
7.5 Programming additional tags
Touch with the tags, piece by piece, the symbol.
BEEEEEP
After each memorized tag [ ].
Outdoor panel
Step
2
Step
3PROG Press PROG.
The red LED is off, programming procedure is terminated.
Any error during programming is signaled with [ ] .
BEEEEEP
In this case, the procedure must be recommenced from Step 2 .
Supply control unit
7.6 Deleting all the programmed tags
Use this procedure only if you lost one or more of your tags. The remaining ones must be programmed
again.
First
Key
from
bottom up
Long press the key [ . The Panel enters programming.
BEEEEEP]
7 short touches 2 x [BEEP].
BEEEEEP
Immediately one long press [ The tags are deleted.].
Step
3PROG Press PROG.
The red LED is off, programming procedure is terminated.
Supply control unit
Step
1Supply control unit PROG Long stroke of PROG.
The red LED is on.
Outdoor panel
Step
2
Harry Johnston
Oliver Thompson

11.2014 USM.KIT.VPE.2F0.ENY
Designed and Manufactured by ELECTRA
Made in EU
ELECTRA Building Communications GmbH
Parkring 10, Liebenberggasse 7 | 1010 Wien – Austria
Phone [phone] – 3817 | Fax + 43 1 516 33 – 3000
offic[email protected]
MAINTENANCE
8
The Outdoor panels must be kept away from corrosive substances, lime or mechanical shocks.
The Terminals must be kept away from water, or any other liquids, mechanical shocks, fumes,
dusts etc.
The components of the system can be cleaned with a piece of soft, cotton cloth.
The optional accumulator connected with the Supply control unit will be replaced after the
expiry of its life span. The Supply control unit ensures the accumulator's charging, as long as
the accumulator is not defect. The state of the accumulator is indicated by the signals of the
LED S1 and the acoustic warning in case of a defect.
WARRANTY
9
A three year warranty is granted, from the purchase date, on the basis of the proof of purchase
and if the system was used according to the technical manual.
NO WARRANTY IS GRANTED for: inappropriate installation and use, deliberate
damaging, theft, arson, natural disasters, unauthorized interventions to the
system, the lack of protection of the system's components in case of renovation
activities in the building.
The BELLCOME video systems for residential buildings are produced in compliance with the EU
standards and bear the CE conformity marking.
AUTHORIZED REPRESENTATIVE of ELECTRA S.R.L.
10