Fit System
Refrigerated Well Units
The new Self Service Fit System is a flexible solution with compact dimensions to solve the problems of food
servery in any location. It is versatile and trendy (with its appealing aesthetics thanks to the cherry wood finish
or the stainless steel panelling). The refrigerated well units are ideal for the refrigeration, conservation and
display of GN containers, juices, yoghurt, milk and cold drinks or items.The models detailed on this sheet are
refrigerated well units (stainless steel and cherry wood finish) 1125, 2500 mm in lenght (3 and 4 GN). The codes
320136 and 320140 are available on a refrigerated cupboard suitable to store GN containers, bottles, cold
items.
320138
• Refrigerated well units include:
- wheels
- pannelings in stainless steel or
with cherry wood finish
- doors (on neutral base)on the
operator side in stainless steel or
with cherry wood finish
- 1 tray slider on the customer
side with stainless steel pipes or
cherry wood finish
- 1 refrigerated cupboards on
codes 320136 and 320140
- 1 overshelf with neon lights
• 304 AISI stainless steel top with
rounded edges.
• Well with all corners rounded to
facilitate cleaning.
• The well dimensions allow the
storage of 1/1 GN containers (2 in
the model 750 mm in lenght, 3 in
the model 1125 mm in length and
4 in the model 1500 mm in length)
or various combinations of
containers, all with a maximum
height of 200 mm (available as
accessories).
• Static cooling.
• Thermostatically controlled
temperature can be set from +2 to
+10°C, at ambient temperature,
following HACCP rules.
• Refrigerated cupboard with
thermostatically controlled
temperature can be set from +2 to
+10°C, at ambient temperature,
following HACCP rules.
• The cupboard underneath is
neutral, for the storage of
crockery, or refrigerated, for the
storage of food or cold items.
• Digital control panel.
• The tray slider is constructed in
304 AISI stainless steel tubing or
with cherry wood finish and is
installed on the customer side.
The tray slider can also be folded
down to facilitate passage of the
units through doorways.
• All units are mounted on four
wheels, 150 mm in height (two
with brakes), but can be mounted
on 150 mm high feet (as special).
• Optional tilting plinth can be
installed to cover the feet or the
wheels.
• All models comply with the
standards required by the main
international approval bodies and
are H marked.
