Electus Distribution QP5586 User manual
Basic Troubleshooting
LED not displayed
Check the power source is correct voltage
and correct polarity.
Display appears scrambled
Check that all connections are correct and tight.
Check that there is no harsh interference nearby.
Just display 999
Voltage out of range.
Check the connection of signals cable.
Installation Size
Basic Troubleshooting
LED not displayed
Check the power source is correct voltage
and correct polarity.
Display appears scrambled
Check that all connections are correct and tight.
Check that there is no harsh interference nearby.
Just display 999
Voltage out of range.
Check the connection of signals cable.
Installation Size
QP5586 (8-30VDC Power Source Measure DC8-30V)
Digital Panel Meter
MANUAL
23mm+0.5
Distributed by:
Electus Distribution Pty Ltd
320 Victoria Rd
Rydalmere NSW 2116Australia
Phone: 1300 738 555
Fax: 1300 738 500
48mm+0.5 www.electusdistribution.com.au
QP5586 (8-30VDC Power Source Measure DC8-30V)
Digital Panel Meter
MANUAL
23mm+0.5
48mm+0.5
Distributed by:
Electus Distribution Pty Ltd
320 Victoria Rd
Rydalmere NSW 2116Australia
Phone: 1300 738 555
Fax: 1300 738 500
www.electusdistribution.com.au
WIRING DIAGRAM:
QP5586 Digital Voltmeter
Power Source DC8-30V measure DC8-30V
FEATURES:
-Ultra-bright LED display
-Polarity: Automatic Sensing
-Automatic Calibration upon zero reading for 0V input
-High accuracy and Low cost
-Easy to install
-Re-calibrated by adjusting the calibration potentiometer
-Ideal for auto, boat, industrial, commercial & domestic use
OPERATION SPECIFICATIONS:
Power Source DC8-30V
Maximum Count 999 (3 digit)
Operating Temperature 0 to 55
Storage Temperature -10 to 80
Relative humidity 20%~80%
Weight 30-35g
Dimension W50mm x H26mm x D23.5mm
Panel Cutout 48mm×23mm
Sample Frequency 400ms
QP5586 Digital Voltmeter
Power Source DC8-30V measure DC8-30V
FEATURES:
-Ultra-bright LED display
-Polarity: Automatic Sensing
-Automatic Calibration upon zero reading for 0V input
-High accuracy and Low cost
-Easy to install
-Re-calibrated by adjusting the calibration potentiometer
-Ideal for auto, boat, industrial, commercial & domestic use
OPERATION SPECIFICATIONS:
Power Source DC8-30V
Maximum Count 999 (3 digit)
Operating Temperature 0 to 55
Storage Temperature -10 to 80
Relative humidity 20%~80%
Weight 30-35g
Dimension W50mm x H26mm x D23.5mm
Panel Cutout 48mm×23mm
Sample Frequency 400ms
DC -
21
QP5586 Meter
DC +
PIN 1: DC8~30V + (Positive pole)
PIN 2: DC8~30V - (Negative pole)
CAUTION
Do not disassemble
The power polarity is not reversed
PARAMETER
Model Range Resolution Accuracy
QP5586 DC8-30V 100mV
±0.3%+1digit
WIRING DIAGRAM:
DC -
21
DC + QP5586 Meter
PIN 1: DC8~30V + (Positive pole)
PIN 2: DC8~30V - (Negative pole)
CAUTION
Do not disassemble
The power polarity is not reversed
PARAMETER
Model Range Resolution Accuracy
QP5586 DC8-30V 100mV
±0.3%+1digit
