Eleiko 3062962 User manual

ELEIKO
ADJUSTABLE BENCH
Art.no. 3062962, 3062963

Read before installation and use
Safety instructions
Warning labels
List of components
Assembly instructions
Tools needed
User guide
Purpose
General instructions for use
Product specifications
Care and maintenance
Preventive maintenance and inspections
Spare parts and service
Warranty
3
3
4
5
6
6
10
10
10
10
11
11
11
11
CONTENTS

Install and use this equipment in a place where access and supervision are specifically controlled by the owner.
Be sure to install the equipment on a stable base and level the equipment properly. Eleiko recommends that all
equipment is secured to the floor and installed by a licensed contractor or an Eleiko installer.
This equipment is intended for indoor use only.
SAFETY INSTRUCTIONS
It is the responsibility of the purchaser of ELEIKO products to instruct all users and supervising personnel on
proper usage of the equipment.
All included warnings (labels) and instructions MUST be read before the use of any Eleiko 1.
equipment. Only use the equipment as it is intended.
A user MUST get a medical examination and proper instructions before using any Eleiko 2.
equipment.
DO NOT let anyone, under any circumstances, use equipment that appears to be damaged. Do not 3.
try to repair any equipment before consulting an Eleiko technician.
DO NOT replace components of Eleiko equipment with other, none Eleiko, equipment (magnetic 4.
safety pin, frames, bars etc.). Do not improvise! If there are any doubts, consult an Eleiko
representative prior to any intervention.
DO NOT overload the equipment and DO NOT try to exceed personal strength levels. 5.
Children under the age of 14 must be supervised by an adult. 6.
DO NOT remove any safety labels from the Eleiko equipment. Eleiko is not responsible if a label is 7.
removed. Replace damaged labels immediately.
Eleiko packaging for products an be made of wood. Be aware of splinters! You MUST use 8.
protective gloves and proper work wear.
Eleiko packaging material could be a risk when handling. Be aware of crushing! You MUST use 9.
work wear including protective gloves and hard shoes.
Eleiko products and packing material are heavy, You MUST use proper lifting techniques, work 10.
wear and hard shoes.
- 3 -
READ BEFORE
INSTALLATION AND USE

- 4 -
WARNING LABELS

8x
K6S M10 x 20
2000675-L20
2x
LOCKING NUT M10
2000718
2x
WASHER M8 BRB
2000668
1x
FRAME
3000197 p14
3085153 p12
2001345
1x
LEG WITH WHEELS
2000746
1x
BACK REST PLATE
3085437 p25
1x
PLATE COVER
3085437 p39
M10 x 30
2001436-L30
2x
1x
SEAT UPHOLSTERY POLYURETHANE
2001276
1x
SEAT UPHOLSTERY SKAI LEATHER
2001393
1x
BACK REST UPHOLSTERY POLYURETHANE
2001273
1x
BACK REST UPHOLSTERY SKAI LEATHER
2001391
- 5 -
OR
OR
LIST OF COMPONENTS

0,6 m
0,6 m
0,6 m
0,6 m
Socket Wrench Size 17mm
Allen Key Size 6
- 6 -
Before assembly, make sure you have enough clearance on all
sides of the equipment, not less than 0,6 meters. Take in account
the accessibility to remove and replace bar and weights.
TOOLS NEEDED
You need the following tools to assemble the equipment.
NOTE: Do not use electric power tools for assembly.
ASSEMBLY INSTRUCTIONS

1x
FRAME
1x
LEG WITH WHEELS
2x
LOCKING NUT M10
2x
WASHER M8 BRB
M10 x 30
2x
1.
- 7 -

1x
PLATE COVER
1x
SEAT UPHOLSTERY
4x
K6S M10 x20
2.
- 8 -

1x
BACK REST PLATE
1x
BACK REST UPHOLSTERY
4x
K6S M10 x20
3.
- 9 -
THIS END OF BACK REST TOWARDS THE WHEELS!
TURN BACK REST PLATE SO THAT HOLE PATTERN MATCHES PERFECTLY!

606
1230
440
- 10 -
PURPOSE
Adjustable bench that can be used for a variety of free weight training exercises.
Four seat positions and seven back positions offer a wide range of possibilities.
GENERAL INSTRUCTIONS FOR USE
To adjust the position graps the knurled knob and lift seat until it falls into 1.
desired position.
Use the handle to easily lift and move the bench. 2.
PRODUCT SPECIFICATION
Max user weight
Max training weight
Product weight
Dimensions (L x W x H)
150 kg / 330 lbs
350 kg / 770 lbs
34 kg / 75 lbs
1230 x 606 x 440 mm
48,42 x 23,86 x 17,32"
USER GUIDE

- 11 -
PREVENTIVE MAINTENANCE AND INSPECTIONS
NOTE: The safety level of the equipment can only be maintained if it is examined regularly for damage and wear.
Daily:
· Cleaning of upholstery.
Regularly:
· Clean surfaces on the frames and tubes from dust and dirt.
· Check that all bolts between parts, walls and floors are properly tightened, according to
recommendations.
· Check equipment for sharp edges. Replace parts with sharp edges.
See also www.eleiko.com.
SPARE PARTS AND SERVICE
Contact Eleiko for spare parts and service:
Eleiko Group AB | Klastorpsvägen 18 | SE-302 62 HALMSTAD | Sweden
E-mail: [email protected] | Phone: [phone]
WARRANTY
All products manufactured by ELEIKO are warranted to the original purchaser to be free from defects in
workmanship and / or materials under normal use or service as follows:
· 10 years on structural frame welds (NOT on moving parts)
· 1 year on upholstery
Normal wear and tear do not fall under the 10-year warranty.
CARE AND MAINTENANCE

Eleiko Group AB | Klastorpsvägen 18 | SE-302 62 HALMSTAD | Sweden
E-mail: [email protected] | Phone: [phone]
www.eleiko.com
rev. 2105