elero TempoTel 2 User manual

182020001_EN_0812
0682
Operating instructions (translation)
TempoTel 2 867/868/915 MHz
28265.0001, 28266.0001,
28267.0001, 28265.0901,
28266.0901, 28267.0901

© elero GmbH2 | EN © elero GmbH EN | 3
Contents
Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Safety instructions for radio operation . . . . . . . . . . . 5
Intended use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Exclusion of liability . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Scope of supply. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Mounting of wall bracket . . . . . . . . . . . . . . . . . . . . . . 7
Device explanation . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Explanation of functions. . . . . . . . . . . . . . . . . . . . . . . 9
Bidirectional radio system . . . . . . . . . . . . . . . . . . . . . 9
Unidirectional radio system. . . . . . . . . . . . . . . . . . . . 9
Initial operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Factory settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Operating mode . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Menu structure . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Menu mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
PROGRAM menu . . . . . . . . . . . . . . . . . . . . . . . . . . 18
ADMINISTRATION menu . . . . . . . . . . . . . . . . . . . . 19
SETTINGS Menu . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Settings for specific channels . . . . . . . . . . . . . . . . . 22
FUNCTION menu . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Programming the transmitter . . . . . . . . . . . . . . . . . 25
Programming additional transmitters . . . . . . . . . . . 26
Synchronous Programming Mode . . . . . . . . . . . . . 27
Stopping programming mode (bidirectional) in the
transmitter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Approaching end positions roller shutter/awning/
venetian blind . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Operation of the transmitter using Combio JA Pulse30
Deleting positions/deleting transmitters . . . . . . . . . 31
Battery replacement . . . . . . . . . . . . . . . . . . . . . . . . . 32
Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Towns for the selection. . . . . . . . . . . . . . . . . . . . . . . 33
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Repair . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
EC Declaration of conformity. . . . . . . . . . . . . . . . . . 37
Address . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Contents Contents

© elero GmbH4 | EN © elero GmbH EN | 5
Safety instructions
The instructions must be observed in order to
ensure the product can be operated smoothly and
safely and its properties can be fully realised.
• The operator/user must have completely read and understood
the instructions.
• The operator must ensure that the instructions are available to
the user in a legible form.
• The operator must ensure that all safety measures are observed
and complied with.
• The following safety and assembly instructions apply to the
device and not to the accessories and drive.
CAUTION!
Failure to observe these can cause physical
injury!
Observe all safety instructions.
• Never install or take into operation devices which are damaged.
• Only use unmodified and compatible original parts.
• If the device is opened without permission or used in an improper
manner, or if it is incorrectly installed or operated, there is a risk
of injury to persons and damage to property.
• The device contains small parts which can be swallowed.
Transport
• Should you receive the device in a damaged condition despite
proper packaging, you must not put it into operation. Complain
about any damage to the transport company immediately.
Installation
• Observe the regulations during installation.
Operation
• Use only in dry rooms.
• If one or more transmitters are used for controlling the system, its
operating range must stay visible during operation.
• Keep control systems out of the reach of children and the disabled.
• Dispose of used batteries properly.
Safety instructions for radio operation
Observe all safety instructions for radio operation.
Only use radio systems which are approved and can be operated
without interference.
• Radio systems must not be operated in areas where there is an
increased risk of interference (e.g. hospitals, airports).
• The remote control is only approved for devices and systems for
which any malfunction of the transmitter or receiver would not
result in a risk for persons, animals or property, or if such a risk is
covered by other safety equipment.
• The operator has no protection whatsoever against interference by
other telecommunication installations and local terminals (e.g. also
from radio installations which are operated properly in the same
frequency range).
• The range of the radio signal is limited by legislation and the
structural conditions.
Intended use
The TempoTel 2 is a multi-channel transmitter. It can be used
unidirectionally (compatible with the existing ProLine program) or
bidirectionally. The hand-held transmitter should only be used for
controlling roller shutters, venetian blinds and sun protection systems
which are fitted with elero radio receivers. Other use, or use beyond
Safet
y
instructions Safet
y
instructions for radio operation

© elero GmbH6 | EN © elero GmbH EN | 7
this is not considered to be use for intended purpose.
The hand-held transmitter is referred to as "device" in this manual.
Exclusion of liability
elero GmbH assumes no liability for personal injuries, property
damage and financial losses which arise from use other than
mentioned above, modifications to the device, improper use and
failure to observe the operating instructions. Liability for material
defects is excluded in such cases.
Scope of supply
TempoTel 2 (batteries included in the device),
wall bracket, 2 wall plugs, 2 screws.
Technical data
Name of device TempoTel 2
Operating voltage 3 V DC
Battery type 2 x LR06 (AA Mignon)
IP Code IP 20
Temperature range 0 to +55 °C
Radio frequency 867/868 MHz frequency band
Dimensions in mm (hand-held trans-
mitter)
L 150 x W 51 x H 26
Weight in grams (including batteries) 140
There are different regulations for the USA, Canada, Australia and
some countries in South America.
Radio frequency 915 MHz frequency band
Mounting of wall bracket
• The wall bracket must be fixed so
that the drill holes do not touch
any electrical cables.
• Before installing the unit in the
required position, check that
the transmitter and receiver are
functioning perfectly.
• Attach the bracket to the wall
with the wall plugs and screws
provided.
The top part of the wall bracket can be
moved.
E
xclusion of liabilit
y
M
ountin
g
of wall bracke
t

© elero GmbH8 | EN © elero GmbH EN | 9
Device explanation
Front of device
1 Display
2 Left menu button
3 Right menu button
4 Joystick
5 Operating mode indicator
6 UP button
7 STOP button
8 Status indicator
9 DOWN button
10 Select button
Back of device
11
12
13
Only for experts:
12 DIP switch 1
13 DIP switch 2
Explanation of functions
Bidirectional radio system
A bidirectional radio system transmits radio signals to a radio receiver
and enables feedback from the radio receiver to the transmitter. The
radio signal can be sent directly to the target receiver. If this is not
possible then the radio signal is forwarded via other bidirectional
participants until the signal reaches the target receiver. The target
receiver carries out the command and sends a confirmation back to the
transmitter.
Bidirectional radio operation is only possible if all participants are
bidirectional. Otherwise, the system is only unidirectional.
Unidirectional radio system
A unidirectional radio system transmits radio signals to radio receivers.
However, in contrast to the bidirectional radio system, the radio
receivers cannot send back a reply to the transmitter. The transmission
of radio signals from radio receiver to radio receiver is also not
possible.
Initial operation
Press a button to switch on the hand-held transmitter and illuminate
the display, status display and operating mode display. The hand-held
transmitter is in automatic mode during initial operation.
Note
Do not press the P button until the receivers are in programming
mode. The active channel for a radio system is decided during the
programming. If the receivers are not in programming mode, the
channel of the sender changes to the unidirectional mode. In order
to restore the starting condition, press the STOP and Pbuttons
simultaneously for 6 seconds until the status display lights.
Select the required language by navigating the menu during initial
operation.
D
evice ex
p
lanation
E
x
p
lanation of functions

© elero GmbH10 | EN © elero GmbH EN | 11
Factory settings
Program
Individual Off
Open 07:00 / Sat + Sun 08:00
Close 20:00
Astro On
Lock time opening 06:30 / Sat + Sun 08:00
Lock time closing --:-- (off)
Astro evening Off
Open 07:00 / Sat + Sun 08:00
Lock time closing --:-- (off)
Settings
Holiday Off
Astro offset In the Morning +0:00 minutes
Evening +0:30 minutes
Language German
Lighting (display) On
SU/WI time Automatic changeover ON
Intermediate position --- (without specifying run time)
Ventilation position --- (without specifying run time)
Program position ↓End position (for timed switching com-
mand
DOWN )
Program position ↑End position (for timed switching com-
mand UP )
Priority Off (automatic switching commands
not prioritised)
Shading Off (automatic shading system not
deactivated with automatic timed
switching command
DOWN )
Product selection Roller shutter
Note
Settings according to channels are only available if at least one
channel has been programmed.
Notice: Confirming “Factory settings” in the menu FUNCTION
restores all the internal settings of the hand-held transmitter to
the factory settings (“Settings”, “Program”) except the setting for
deleting the channel.
Status display
A radio signal is displayed by the illumination of the status display
(LED ring around the STOP button). The different colours of the
status display mean:
E
x
p
lanation of functions
E
x
p
lanation of functions

© elero GmbH12 | EN © elero GmbH EN | 13
Status display Meaning
Flashing orange Channel (transmitter) not programmed in any
receiver
Quick flashing orange Channel (transmitter) in bidirectional program-
ming mode. Operation of already programmed
receivers not possible.
Every 3 seconds in group programming mode
(also without pressing a button)
Orange then green Channel (transmitter) is operating bidirection-
ally and receiver has received the signal
Orange then flashing
red
Channel (transmitter) is operating bidirection-
ally and one of the receivers has not received
the signal
Red then green Channel (transmitter) is operating bidirection-
ally and receiver has received the signal,
batteries weak
Red then flashing red Channel (transmitter) is operating bidirection-
ally and one of the receivers has not received
the signal, batteries weak
Green Channel (transmitter) is operating unidirection-
ally: Transmit signal is being sent
Green with repeat,
then red (unidirec-
tional)
Channel (transmitter) is deleted
Alternating orange and
green (or red), then
red (bidirectional)
Channel (transmitter) is deleted
Flashing red Batteries weak
The transmitting power or the radio range will be reduced by the
reduction in the performance of the battery. Weak batteries are
indicated on the display using BAT. If the voltage drops below 2 V,
functions are no longer executed and nothing is displayed.
Group control unit
A group is understood to mean the control of several receivers at the
same time. The selected group is controlled by a travel command.
All 10 channels (transmitter) can be used for the group control.
Any number of receivers can be programmed and controlled in each
channel.
Joystick
Pressing the joystick briefly up and down enables you to select from
10 channels. The channels are shown in the display with the channel
number or with the name input by the user.
An additional channel is reserved for the central channel (All) which
is automatically assigned to all individual channels. The central
channel can be selected by moving the joystick briefly to the left.
When the central channel is selected, this controls all radio channels
simultaneously.
If the hand-held transmitter has two or more bidirectional individual
channels, you can configure and select two group control systems
by moving the joystick briefly to the right. The bidirectional channels
can be allocated for a group via the “Administration” menu.
Selection button
Pressing the selection button briefly allows you to query the current
status (automatic/manual) of the programmed receivers (bidirectional
receivers only) and the hand-held transmitter.
Pressing the selection button for longer (approx. 1 second) switches
off automatic mode of the respective bidirectional channel or all
unidirectional channels. The operating mode display lights red
and changes to MANUAL mode in the display. →The receiver now
only carries out manual travel commands and does not respond to
automatic travel commands.
Note
In the case of unidirectional channels only the automatic
system for timed switching functions in the transmitter is
E
x
p
lanation of functions
E
x
p
lanation of functions

© elero GmbH14 | EN © elero GmbH EN | 15
switched off in the manual mode. The automatic shading
system stays switched on in unidirectional receivers.
In the case of bidirectional channels all the automatic
functions in the receivers are switched off in manual mode.
This means the receivers do not respond to automatic
timed switching commands and shading commands from
programmed sensors.
Upward travel of the receiver is initiated when the automatic
system is activated.
Pressing the selection button for longer (approx. 1 second) switches
on automatic mode of the respective bidirectional channel or all
unidirectional channels. The operating mode display lights green
and the operating mode in the display changes to AUTO. →The
receiver now executes automatic and manual travel commands.
Pressing the selection button in the central channel for longer
(approx. 1 second at the most) changes the AUTO or MANUAL
operating mode for all the individual channels. Switching all the
channels to AUTO operating mode sets a different operating mode
for individual channels (AUTO and MANUAL),as indicated by the
orange operating mode display and the letters A+M in the display.
Operating mode
Each time a button is pressed, the following are shown in the
display: the currently selected channel, the current operating
mode (AUTO or MANUAL) and the symbol for the control status.
Activating a switching time function for a channel displays the type
of switching time function and the next automatic switching time.
Room allocation is also shown in the display if the channel is
allocated to a room in the editing menu.
Display in operating mode
Menu Horloge
AUTO
Cuisine
18:35
Volet 1
DST BAT PS ↔
02.11.2010 17:25
Room allocation (optional)
Function bar:
↔= Bidirectional
→= Unidirectional
Channel number or name of the
channel
Operating mode, status symbol
Switching time type, next switching
time
Pressing the menu button “Timer” can activate or deactivate the
automatic timed switching function for the channel.
The display switches off after 2 minutes if no buttons have been
pressed.
Function bar abbreviations and display symbols
DST Daylight saving time activated
BAT Low battery charge
P Channel-related priority for timed switching command activated
S Channel-related activation or deactivation of the automatic shad-
ing system when automatic timed switching command is activated
Travel up
Travel down
End position top
End position bottom
Stop status
Wind interlock
Individual switching time ON
Astro switching time ON
E
x
p
lanation of functions
E
x
p
lanation of functions

© elero GmbH16 | EN © elero GmbH EN | 17
Menu structure
Date/Time
Program
Administration
Settings
Function
Holiday
Factory setting
Lighting
Intermediate position or
Intermediate position 1 (in secs)
Ventilation/tilting position
or intermediate position 2
or fabric tensioning position
(in 0.1 seconds)
Program – Position ↓
Language
Astro
Astro
Individual
Version
Channels
Rooms
Groups
Reset
Summer/winter time
Channel selection
Product selection Product-specific transmitter configuration
(not for groups and central channel)
Priority Priority automatic commands On/Off
Astro evening Astro mode closing
Menu structure
Shading Activate auto shading for clock UP On/Off
Channel settings
Select town
Latitude/longitude
Astro offset
Program – Position ↑ Setting travel on time switching
command UP
Town selection by geographic data
with continental assignment for astro function
Freely selectable input of geographic data
Latitude, longitude and UTC for astro function
Switching time off All day switching times switched off in the channel
Individual switching times
Astro mode switching times
Channel-specific allocations
Room-specific allocations
Group allocations
Reset all allocations and names
Holiday mode On/Off
Setting a travel time to intermediate position
Setting a travel time to desired position
Setting travel on time switching
command DOWN
Shift astro time for opening and closing
Language selection
Display lighting On/Off
Set summer/winter time changeover to automatic,
manual or changeover disabled
Reset all settings to factory settings
(without changing channel assignment)
Version details
Menu mode
Pressing the “MENU” button opens the menu mode for setting the
time, date, switching times and function parameters.
Selections and changes in the menu can be made using the left
and right menu buttons and the joystick. The keyboard layout is
specified in the text above the menu button.
Joystick functions
Movement down Downward scrolling function or value
change (-)
In the Time Change menu: Selection of the
days
Movement up Upward scrolling function or value change (+)
In the Time Change menu: Selection of the
days
Movement to the left/
right
Changes the setting ranges or activates the
field.
Note
If the hand-held transmitter is in the menu mode and the
buttons are not pressed for longer than 90 seconds, the menu
is automatically changed back to operating mode without
saving the changes.
DATE/TIME menu
Setting the date and time. Using the automatic switching commands
requires a current setting.
E
x
p
lanation of functions
E
x
p
lanation of functions

© elero GmbH18 | EN © elero GmbH EN | 19
PROGRAM menu
Once you have selected the channel, you
can set different switching times:
• Individual (each day can be selected)
• Astro (each day can be selected), set
ON at the factory
• Astro evening (each day can be
selected)
The selection of the switching or lock times
assigned to days is performed using the
activation of the days of the week using the
joystick (up/down).
Switching time
example:
All switching times can also be deactivated per channel for all
days, display "–:–" for deactivated switching times.
Note
It is not possible to select different switching times for specific
channels for several unidirectional function channels (switching
time applies to all unidirectional channels).
Individual
Automatic up and down movements at the set times and days.
Astro
Controls the up and down movement according to Astro function in
accordance with the sunrise and sunset times. Programmable lock
times prevent up and down movements occurring too soon.
A switching time adapted to the local conditions for the up and down
movements can be achieved using input of the geographic data by
selection of a town or inputting longitude and latitude. This can be
supplemented with an individual Astro offset (see settings).
Astro evening
This controls the up movement according to the set switching time
and the down movement according to the Astro function.
Change Back
Switching times channel 4
07:25
Mo Tu We Th Fr Sa Su
20:15
The programmable lock time prevents down movement using the
Astro function occurring too soon.
A switching time adapted to the local conditions for the down
movements can be achieved by inputting the geographic data
according to town selection or input of longitude and latitude and
individual Astro offset (see settings).
Lock time
This prevents up or down movement using the Astro function
occurring too soon. Changing lock times: "Program" menu, select
channel, Astro evening (or Astro), select "Change", select days by
moving joystick completely to the right, change lock times, save.
ADMINISTRATION menu
You can select channels, rooms and groups and set their names
and assignments. Selecting the menu item “Reset" enables all the
designations to be restored to the factory settings.
Channels
You can allocate a selected channel to a room or group
(bidirectional channels only). You can change the designation
individually for the selected channel. The channel's position in the
list can be moved for the operating mode.
Rooms
Once you have designated individual rooms, you can allocate
channels or groups to selected rooms and change the room
designations. However, no functions can be assigned.
Groups
You can select two groups, allocate individual channels or rooms to
them and change their group designation.
E
x
p
lanation of functions
E
x
p
lanation of functions

© elero GmbH20 | EN © elero GmbH EN | 21
Note
Group allocation is only available if at least 2 bidirectional
radio channels exist. Group allocation is not possible for
unidirectional channels.
SETTINGS Menu
Adjusting the functions as required.
Global settings
Settings for holidays, Astro, language, lighting and Summer/Winter
time apply to all channels.
Holiday
The holiday function simulates an occupied house while you are on
holiday. If this function is active, all the programmed switching times
are delayed by 0 - 30 minutes at random.
Astro
When the Astro menu is selected, the input of a town or the direct
input of longitude and latitude with UTC and a defined Astro offset
of the switching time are available for adapting the Astro switching
times according to geographic data or individual requirements.
Town selection
It is possible to select a town using the geographic data. The towns
are sorted by continent. The continents are selected by moving the
joystick sideways; a town is selected by moving the joystick up or
down. The town of Kassel for Germany is set at the factory. See the
"Towns for selection" chapter for selectable towns.
Longitude / latitude
The direct input of geographic data for the Astro function is possible
using the "Longitude", "Latitude" and "UTC" input fields. When
a town is selected, the geographic data of the selected town are
displayed. If data are entered directly which are different from the
town-related coordinates, the previous selection of the town is
cancelled.
Astro offset
Individual or local adjustment of the Astro switching times with
the option of offsetting the opening and/or closing time by up to a
maximum of ± 120 minutes.
Language
You can select the language of the menu texts from a list:
• German
• Spanish
• Dutch
• Polish
• English
• Italian
• Swedish
• French
• Portuguese
• Danish
Lighting
Switching the display background lighting on and off.
This is switched off automatically if no button is pressed for
5 seconds. The lighting function is switched on at the factory.
Su/Wi Time
Su/Wi designates the automatic Summer/Winter time changeover.
The automatic changeover is activated at the factory; the timer
adjusts automatically.
In the menu, you can select between an automatic Summer / Winter
time changeover in accordance with country-specific rules or a
manual Summer time changeover for areas without defined rules
for the Summer time. Automatic Summer time changeover is not
available in these areas. Both changeover types can be deactivated
with resetting to the local standard time.
An activated Summer time is indicated in the function bar of the
display with "DST" (daylight saving time).
Note
If the automatic Summer time changeover cannot be selected,
a possibly necessary manual Summer time setting must
E
x
p
lanation of functions

© elero GmbH22 | EN © elero GmbH EN | 23
always be made using the "Su/Wi time" menu in order to
prevent unwanted switching time offsets of the Astro function
(closing and opening too soon).
Settings for specific channels
The following settings apply to each channel.
Possible running time to the intermediate position: from 0 to 360
seconds, running time to the ventilation position: roller shutters 0 to
120 seconds, venetian blinds 0 to 180 seconds.
In addition, you can program intermediate/ventilation/tilting
positions. You can also program on the receiver.
Product selection
After selection of a channel, a product-specific designation of
individual functions and a maximum running time can be assigned
to the channel. Product-specific basic characteristics of venetian
blind products as compared with other product groups are
recognised and configured automatically.
Roller shutter
Awning
Interior shading
Available setting: intermediate position and
ventilation position
Available setting: intermediate position and
fabric tautening position
Available setting: intermediate position 1 and
intermediate position 2
Maximum running time in each case 120 seconds
Venetian blinds Available setting: intermediate position and
tilting position
Maximum running time 180 seconds
Intermediate position or intermediate position 1
The transmitter can store a run time for the intermediate position for
each channel. A common run time for the intermediate position can
be set for unidirectional channels.
After selection of a channel, a running time for the approach of
an intermediate position from the top end position can be set in
1 second steps using the joystick (up/down) or using the UP/DOWN
buttons.
Approach of the intermediate position (according to the preset
running time): short double press of the DOWN button.
The intermediate position run time is set at 0 (---) at the factory.
Ventilation, tilting, fabric tautening position, intermediate
position 2
The transmitter can store a running time for this position for each
channel. A common run time can be set for unidirectional channels.
After selection of a channel, a running time for the approach of a
ventilation position (roller shutter) or tilting position (venetian blind)
from the bottom end position can be set in 0.1 second steps using
the joystick (up/down) or using the UP/DOWN buttons.
Approach of the ventilation or tilting position (according to the preset
running time): short double press of the UP button.
The ventilation position running time is set to 0 (---) at the factory.
Program position ↓(DOWN)
After selection of a channel, the way an automatic closing command
is carried out (if the timed switching function for the channel is
activated) can be selected. You can set a common program position
for unidirectional channels.
End position Roller shutter, awning, venetian blind or interior
shading moves to the bottom end position
Intermediate position/
intermediate posi-
tion 1
Roller shutter, awning or venetian blind moves to
the programmed position
Intermediate position
2/ventilation/tilting/
fabric tautening
position
Roller shutter, awning, venetian blind or interior
shading moves to the bottom end position and
then to the programmed position
E
x
p
lanation of functions

© elero GmbH24 | EN © elero GmbH EN | 25
Program position ↑(UP)
After selection of a channel, the way an automatic opening
command is carried out (if the timed switching function for the
channel is activated) can be selected. You can set a common
program position for unidirectional channels.
End position Roller shutter, interior shading, venetian blind or
awning moves to the top end position (factory
setting)
Intermediate position
2/ventilation/tilting/
fabric tautening
position
Roller shutter, awning, venetian blind or interior
shading moves to the programmed position or
travels for the programmed running time
Priority
After a channel has been selected, it can be defined using an
activated priority that automatic switching commands from the
hand-held transmitter channel are given priority in all receivers
and also accepted in the MANUAL operating mode of receivers.
Automatic switching commands are prioritised in the factory
settings.
The activated prioritisation of timed switching commands is
indicated in the function bar of the display by a "P".
In unidirectional channels only a common setting of the priority is
possible.
Automatic shading system
A time-controlled down command switches off the automatic
shading system (privacy protection). A time-controlled opening
command switches on the automatic shading system again. The
shading setting must be set to "Automatic ON".
The shading setting is set to “Automatic OFF” at the factory.
The activated automatic shading system is indicated in the function
bar of the display by an "S".
In unidirectional channels only a common setting is possible.
FUNCTION menu
Factory setting
Resets all settings except the receiver assignments linked to
channels to the factory settings. All the initial operation steps must
then be carried out.
During the initial commissioning, the following must be set using the
automatic menu guidance: "Language setting" -> "Town selection"
-> "Date/time".
Version
Indication of the current firmware version.
Programming the transmitter
Requirement
The receiver is installed. Check whether the channel is deleted or
in the correct mode according to the status display.
Stand in front of the blind to be programmed for the programming.
1. With electrical receivers which have already been installed,
switch the fuse off, and on again a few seconds later.
The receiver is now in programming mode for about 5 minutes.
2. Press the programming button Pon the back of the device briefly
(approx. 1 second) until the status display lights for a short time.
The blind moves up and down for approx. two minutes, showing
that the receiver is in programming mode.
3. Press the UP button as soon as the blind starts moving in Open
direction (within 1 second at the most). The status display lights
briefly.
The blind stops briefly, starts moving again, stops and then
moves in the Down direction.
4. Immediately (within maximum 1 second) after starting down
travel, press the DOWN button. The status display lights briefly.
The blind stops. The transmitter channel is programmed.
E
x
p
lanation of functions
E
x
p
lanation of functions

© elero GmbH26 | EN © elero GmbH EN | 27
Note
If the blind does not stop, it must be programmed again.
A bidirectional programming process in the hand-held
transmitter can be cancelled by pressing the STOP button for
6 seconds.
Programming additional transmitters
Note
If several receivers are connected to the same feed line,
then all are simultaneously in programming mode for approx.
5 minutes after switching on the mains power.
If the Pbutton on the transmitter is now pressed, all the
receivers start programming mode at the same time (up/down
movements). Randomly different intervals between open /
down movements cause the receivers to become offset against
one another. The longer programming is delayed, the greater
the offset will be.
The short up/down movements can be stopped by pressing
the STOP button briefly on a transmitter which has already
been programmed. The programming mode in the receiver is
interrupted.
The transmitter can now be assigned without having to
disconnect individual receivers. If the blind moves in the wrong
direction, delete the transmitter and program it again.
(→see Deletion of transmitter)
For programming additional transmitters to one receiver:
1. Press the UP, DOWN buttons and the programming button P
(back of device) simultaneously (for 3 seconds) on a transmitter
which has already been programmed to the receiver. The status
display lights briefly. The receiver is now in programming mode.
2. Press the programming button Pon the transmitter to be
programmed until the status display lights briefly. The receiver is
now in programming mode (up/down movements).
3. Press the UP button as soon as the blind starts moving in Open
direction (within 1 second at the most). The status display lights
briefly. The blind stops briefly, starts moving again and then
moves downwards.
4. Immediately (within maximum 1 second) after starting down
travel, press the DOWN button. The status display lights briefly.
The blind stops. The transmitter channel is programmed.
If more than 10 bidirectional receivers are being programmed at the
same time, the transmitter channel in programming mode switches
to group mode. The group mode is indicated by fast flashing with
pauses.
Programming in group mode is completed after a 2-minute pause or
pressing the STOP button for 6 seconds.
Note
A jogging mode for venetian blinds for quickly reaching
receivers which are further away is not possible in a transmitter
channel with more than 10 programmed receivers.
Synchronous Programming Mode
For programming additional receivers to one transmitter at the same
time:
1. Press the DOWN button and the programming button P(back
of device) simultaneously (for 3 seconds) on a transmitter which
has already been programmed to the receivers). The status
display flashes. The receivers are now in programming mode.
2. For bidirectional operation only: press the programming button
Pon the transmitter to be programmed until the status display
lights briefly. The receivers are now in programming mode (up/
down movements).
3. Press the UP button as soon as the blind starts moving in open
direction (within 1 second at the most). The status display lights
briefly. The blinds stop briefly, start moving again, stop and then
move downwards.
E
x
p
lanation of functions
E
x
p
lanation of functions

© elero GmbH28 | EN © elero GmbH EN | 29
4. Immediately (within maximum 1 second) after starting down
travel, press the DOWN button. The status display lights briefly.
The blinds stop moving. The transmitter channel is programmed.
Stopping programming mode (bidirectional) in the
transmitter
Press the STOP button for at least 6 seconds until the status
display lights orange.
Approaching end positions roller shutter/awning/
venetian blind
Requirement
The transmitter/transmitter channel is programmed. The end
positions of the drive have been set.
Approaching bottom end position (roller shutter/awning)
Press the DOWN button briefly. The blind moves to the bottom end
position/the awning extends completely.
Approaching the lower end position (venetian blind)
Press the DOWN button until the status display lights briefly. The
blind approaches the lower end position.
Only press the DOWN button briefly (jog mode) for venetian blind
drive, pulse mode for Combio JA Pulse), the blind approaches
briefly and stops again.
Approaching top end position (roller shutter/awning)
Press the UP button briefly. The blind approaches the upper end
position/the awning retracts.
Approaching the upper end position (venetian blind)
Press the UP button until the status display lights briefly. The blind
approaches the upper end position.
Only press the UP button briefly (jog mode) for venetian blind drive,
pulse mode for Combio JA Pulse), the blind approaches briefly and
stops again.
Intermediate positions of the blinds
Roller
shutter
Awning Venetian
blind
Interior
shading
Pos▼Intermediate
position
Intermediate
position
Intermediate
position
Intermediate
position 1
Pos▲Ventilation
position
-- /fabric
tensioning
Tilting posi-
tion
Intermediate
position 2
Programming the intermediate position in the receiver
Requirement
The transmitter/transmitter channel is programmed. The end
positions of the drive have been set. The blind is in the top end
position.
1. Move the blind to the required position using the DOWN button.
In doing so, keep the DOWN button pressed.
2. Also press the STOP button. The blind stops. The status display
lights briefly.
The intermediate position is programmed.
Programming the ventilation/tilting position in the receiver
Requirement
The transmitter/transmitter channel is programmed. The end
positions of the drive have been set. The blind is at its lower end
position.
E
x
p
lanation of functions
E
x
p
lanation of functions

© elero GmbH30 | EN © elero GmbH EN | 31
1. Use the UP button to move the blind in the UP direction until
the ventilation gaps open or the slats are inverted. Keep the
UP button pressed during the movement.
2. Also press the STOP button. The blind stops. The status display
lights briefly.
The ventilation position/tilting position is programmed.
Approaching intermediate position
Requirement
The transmitter/transmitter channel is programmed. The blind is at its
upper end position.
1. Press the DOWN button twice briefly. The status display lights
briefly.
2. The blind travels to the stored intermediate position. In the case
of venetian blinds, the slats turn automatically after reaching the
intermediate position if a tilting position has been programmed. If
no intermediate position has been programmed, the blind moves
to the bottom end position (not when using Combio JA Pulse).
Approaching ventilation/tilting position
Requirement
The transmitter/transmitter channel is programmed. The blind is at its
lower end position.
1. Press the UP button twice briefly. The status display lights briefly.
2. The blind travels to the stored ventilation / tilting position. If no
ventilation/tilting position has been programmed, the blind moves
to the top end position (not when using Combio JA Pulse).
Operation of the transmitter using Combio JA Pulse
A Combio 867/868/915 JA Pulse can be used for the precise
adjustment of the slats for venetian blind drives.
The preset pulse time of Combio Pulse is cycled by pressing the UP
or DOWN button.
The pulse time can be changed by the user. Keep the STOP and
UP buttons on a programmed transmitter pressed for 6 seconds
for this. The drive starts to move in small pulses. As soon as the
blind has travelled the required distance, release the UP button,
then release the STOP button. The new pulse time is saved. The
new pulse time corresponds to the sum of all pulse times during
the programming of the pulse time. The Combio JA Pulse ends the
programming of the pulse time after 30 pulses.
Deleting positions/deleting transmitters
Deleting the intermediate position in the receiver
1. Press both the STOP and DOWN buttons.
2. Hold down this button combination for approx. 3 seconds.
The status display lights briefly.
Deleting the ventilation/tilting position in the receiver
1. Press both the STOP button and the UP button.
2. Hold down this button combination for approx. 3 seconds.
The status display lights briefly.
Deleting the transmitter channel in the receiver
1. Press both the STOP button and the programming button P(on
the back of the device).
2. Keep this button combination pressed for approx. 6 seconds
until the status display lights orange briefly and then lights red.
In unidirectional radio operation, the status display lights for
6 seconds: first green briefly twice and then red.
The channel in the transmitter is also deleted.
Deleting all the transmitters in the receiver
1. Press the STOP button and also the programming button P(on
the back of the device) + UP button + DOWN button.
2. Hold down this button combination for approx. 6 seconds.
The status display lights orange/green briefly twice, followed by
red (bidirectional).
E
x
p
lanation of functions
E
x
p
lanation of functions

© elero GmbH32 | EN © elero GmbH EN | 33
The channel in the transmitter is also deleted.
In unidirectional radio operation, the status display lights for 6
seconds: first green briefly twice and then red.
Expert Settings
DIP switch 2 on the rear of the device, under the cover:
switch up: OFF (bidirectional and unidirectional operation possible,
preset), switch down: ON (only bidirectional operation is possible).
DIP switch 1: OEM setting.
Battery replacement
Note
Replace batteries only with batteries of the
identical type.
1. Unscrew the underside of the device and
open the housing.
2. Remove the batteries.
3. Insert the new batteries in the correct
position.
4. Put the device back together again.
Dispose of used batteries properly.
Cleaning
Clean the device with a damp cloth. Do not use a detergent. This
may attack the plastic.
Disposal
After the end of its service life, dispose of the device in accordance
with the applicable regulations.
Towns for the selection
EUROPE
Town Country Town Country
Trondheim Norway Basel Switzerland
Oslo Norway Zurich Switzerland
Oestersund Sweden Bern Switzerland
Stockholm Sweden Geneva Switzerland
Helsinki Finland Budapest Hungary
Moscow Russia Lille France
Copenhagen Denmark Paris France
Glasgow Scotland Brest France
London England Lyon France
Manchester England Toulouse France
Amsterdam Netherlands Marseilles France
Brussels Belgium Venice Italy
Hamburg Germany Milan Italy
Kassel Germany Florence Italy
Berlin Germany Roma Italy
Cologne Germany Naples Italy
Dresden Germany Zagreb Croatia
Frankfurt Germany Bucharest Romania
Nuremberg Germany Istanbul Turkey
Stuttgart Germany Athens Greece
Munich Germany Corunna Spain
Warsaw Poland Madrid Spain
Krakow Poland Barcelona Spain
Batter
y
replacemen
t
T
owns for the selection

© elero GmbH34 | EN © elero GmbH EN | 35
ASIA
Town Country Town Country
Beijing China Singapore Singapore
Shanghai China Mumbai India
Hong Kong China New Delhi India
Manila Philippines Tehran Iran
AUSTRALIA / NEW ZEALAND
Town Country Town Country
Perth Australia Christchurch New Zealand
Sydney Australia
Troubleshooting
Fault Cause Remedy
Drive does not run,
status display does
not light
1. Batteries are low
2. Batteries are incor-
rectly installed
1. Insert new batteries
2. Insert batteries
correctly
Drive does not run,
status display lights
red or flashes orange
Unidirectional: Status
display lights green
1. The receiver is
outside the sending
range.
2. Receiver out of
order or defective
3. Receiver not yet
programmed
1. Reduce distance to
the receiver
2. Switch on or ex-
change receiver
3. Program receiver
Drive operates in the
wrong direction
Directions are incor-
rectly allocated
Delete transmitter and
reprogram
Required drive does
not run
Incorrect group or
channel selected
Select correct group
or channel
Town Country Town Country
Kiev Ukraine Malaga Spain
Vienna Austria Las Palmas Spain
Linz Austria Lisbon Portugal
Innsbruck Austria
Graz Austria
NORTH AMERICA
Town Country Town Country
Vancouver Canada Atlanta USA
Montreal Canada San Diego USA
New York USA Dallas USA
San Francisco USA Miami USA
Denver USA Mexico City Mexico
SOUTH AMERICA
Town Country Town Country
Medellin Colombia Sao Paulo Brazil
Lima Peru Buenos Aires Argentina
Santiago DC Chile
AFRICA
Town Country Town Country
Casablanca Morocco Cairo Egypt
Tunis Tunisia Cape Town South Africa
T
owns for the selection
T
roubleshootin
g

© elero GmbH36 | EN © elero GmbH EN | 37
Fault Cause Remedy
End positions are ap-
proached inaccurately
End positions not
yet set
Have the end
positions set by a
specialist in accord-
ance with the product
instructions
The hand-held trans-
mitter does not carry
out the set switching
commands
1. The date and time
are not set
2. "MANUAL" operat-
ing mode is set
3. The timed switch-
ing functions for
specific channels
are not activated
1. Setting the date
and time
2. Set “AUTO” operat-
ing mode
3. Activate the timed
switching function
for the channel
The hand-held trans-
mitter does not carry
out the set switching
commands accurately
Holiday function is
switched on
Switch holiday func-
tion off
The Astro program
switches inaccurately
1. Date set incorrectly
2. Holiday function is
switched on
3. Astro offset is set
1. Set correct date
2. Switch holiday
function off
3. Adjust Astro offset
There is no timed
switching function for
automatic switching
commands after the
batteries have been
replaced
Power supply inter-
rupted for too long
Setting the date and
time
Repair
Please contact your dealer if you have any questions.
Please always provide the following information:
• Item number and name on the type plate
• Type of fault
• Previously occurring unusual events
• Accompanying conditions
• Own presumption
EC Declaration of conformity
EC DECLARATION OF CONFORMITY
We hereby declare that the following mentioned product/s meet/s the standards of the European Community.
Product name:
ProLine 2
•MemoTec2 (-868) all versions
•Invio2 (-867 / -868) all versions
•AstroTec2 (-867 / -868 / -915) all versions
•MonoTel2 (-867 / -868 / -915) all versions (Progreso1)
•LumeroTel2 (-867 / -868 / -915) all versions (Progreso1M)
•VarioTel2 (-867 / -868 / -915) all versions (Progreso5M)
•TempoTel2 (-867 / -868 / -915) all versions
•MultiTel2 (-867 / -868 / -915) all versions
•SoloTel2 (-867 / -868 / -915) all versions
•UniTec2 (-867 / -868 / -915) all versions
Description: Wall-mounted and hand-held radio transmitters for bidirectional and standard
communication between transmitters and receivers to control roller shutters, awnings,
venetian blinds and indoor shading systems
The conformity of the above mentioned products with the relevant health and safety requirements is taken into
account by the following directives and standards:
•EMC Directive 2004/108/EC
EN 61000-6-2:2005, EN 61000-6-3:2001
EN 60730-1:2000, EN 60730-2-7:1991
•R&TTE Directives 1999/5/EC
ETSI EN 301 489-3 V1.4.1
ETSI EN 300 220-2 V2.1.2
•RoHS Directive 2002/95/EC
Beuren, 26.03.2012
Ralph Trost
-CE Manager-, -Representative documentation -
Re
p
air
E
C Declaration of conformit
y

© elero GmbH38 | EN
Address
elero GmbH
Antriebstechnik
Linsenhofer Straße 65
72660 Beuren
Deutschland / Germany
Tel: [phone]
Fax: [phone]
[email protected]
www.elero.com
Please visit our website if
you require a contact outside
Germany.
Address