Elite Screens Insta-DE Series User manual

020614-JA www.elitescreens.com 1
Insta-DE Series
Soft-padded Dry-erase Whiteboard Projection Screen
User’s Guide
Product Features
Award winning and GREENGUARD certified VersaWhite material.
1.1 gain with 160 degree wide viewing angle.
Special anti-scratch layer to ensure long use as a dry-erase
projection screen.
Application Advantages
Instantly converts flat surfaces/walls into a dry-erase whiteboard projection screen.
Includes dry-erase pens, eraser, and pen holder.
Perfect dry-erase and projection solution for today's short throw projectors.
Ideal and effective instructional presentation tool in the classroom, boardroom, and training
facilities.
What’s in the package Pad
Please make sure all parts listed below are included. If anything is missing please contact us immediately.
a. b. c. d. e. f.
Notes:
1. For best results and maximum product longevity, ONLY
use Elite Screens high density whiteboard Eraser
2. Please use a microfiber cloth and clean water to cleanse
the surface every 2-4 weeks to maintain a fresh and clean
projection surface.
Commercial use installation recommendation
If you would like your screen to have a professional-grade finish that is flat, durable, and free from imperfections
– Elite Screens strongly recommends hiring a professional wallpaper installer, and using a stronger adhesive
material such as Shur-Stik Heavy Duty Clay Wallcovering Adhesive. You can purchase this product easily online,
or consult with your wallpaper installer for other options.
Parts List
QTY
a. Insta-DE Screen Material
1
b. Pen Holder
1
c. Double-sided tape
1
d. Whiteboard markers
2
e. Elite special high density eraser
2
f. 4.5mmx30mm Screw
1

020614-JA www.elitescreens.com 2
Pre-Installation Notice:
1. Make sure the surface of the wall has been properly patched, sanded, and primered.
2. Remove anything from the wall that may puncture the Insta-DE material.
3. Please consult with a professional wallpaper installer for further assistance. We strongly recommend
two or more people for this installation.
Installation
Watch the Installation video at: www.elitescreens.com/ide-install
1. Clean the location where the Insta-DE Screen will be installed.
2. Measure and mark the top-right and bottom-right corner of the installation location
3. Apply double-sided film tape all around the edges of the Insta-DE back padding.
4. Then, apply vertical double-sided film tape from top to bottom every 3-4 inches.
5. Completely peel the first vertical tape strip and peel off a 1-inch length tape film at the top of the double-
side tape on the rest of the vertical strips.
6. Attach the Insta-DE Screen to the top-right and bottom-right corner of the location
Wall
Tape strip
completely
removed
Double-sided tape

020614-JA www.elitescreens.com 3
7. Remove the tape film paper while unrolling the material and firmly attach the first taping line with
pressure.
8. Follow the taping line while unrolling the material and continue removing the tape film as the material unrolls.
Continue attaching the double-sided adhesive tape until you’ve reached the end.
9. Unroll the material to the left and firmly attach the following taping line onto the location. Make sure that the
material has completely rolled out perfectly flat.
Wall
Wall
Wall
Wall

020614-JA www.elitescreens.com 4
10. Repeat steps 7-9 to finish attaching the material to the wall and complete the Installation.
Pen holder installation
Method one: Peel the tape strip off the back of the pen holder and attach the pen holder to the wall or your
preferred location.
Method two:Install the included screw in the wall and hang the pen-holder. See diagram below for details.
Caution:
The double-sided tape is meant to be permanent for the life of the product. It does not remove easily. Please
attach very carefully to avoid having to remove the product and positioning it in a different location.
Use only the included erasers to remove and erase dry-erase markings. For a deep clean, we recommend using
a non-alcohol based dry-erase board cleaner with a soft microfiber cloth.
Elite offers a replacement kit (part number ZER3) which includes:
1 x bottle of 8.45 oz cleaning solution
1 x microfiber cloth
2 x high density foam erasers
2 x sets of dry-erase markers (4 total)
For more information visit www.elitescreens.com/zer3
Contact your reseller or visit shop.elitescreens.com for pricing and purchase.
For more information, technical support or your local Elite Screens contact,
please visit www.elitescreens.com
Wall
Pen holder