Elmo Boxi MP-350 User manual

■Read this guide and the separate “IMPORTANT SAFEGUARD” carefully before
using the projector.
■This guide describes the basic operation of the projector taking for example of the
connection to a computer. Refer to the instruction manual of the BOXi for any other
operations and detailed information.
©2012 Copyright ELMO Co., Ltd. All rights reserved.
Any names, company names and product names referred to in this guide are trademarks
or registered trademarks of the respective companies.
MP-350
QUICK START GUIDE
《BOXi Instruction manual》
Download the instruction manual from the following BOXi
website.
BOXi Product Website：http://boxi.elmoglobal.com/
ENGLISH

2
TABLE OF CONTENTS
TABLE OF CONTENTS ....................................................................................... 2
1GETTING STARTED........................................................................................... 3
Checking the package contents ........................................................................... 3
Part names and functions..................................................................................... 4
Preparing the remote control................................................................................ 5
2USING THE PROJECTOR.................................................................................. 6
Installing the projector.......................................................................................... 6
Connecting to a device......................................................................................... 7
Powering on ......................................................................................................... 8
Detecting the input signal..................................................................................... 9
Adjusting the projected image............................................................................ 10
Powering off ........................................................................................................11

3
1GETTING STARTED
Checking the package contents
Projector AC adapter Power cord Remote control
*Battery included
Protective cover IMPORTANT
SAFEGUARD WARRANTY CARD CD-ROM
*with Hook and loop
fastener (2pcs)
*QUICK START
GUIDE included
■Refer to the instruction manual of the BOXi for details how to use
the Protective cover.
N o t e

4
Part names and functions
TOP/FRONT TOP/BACK
Control
panel
RGB IN
HDMI USB
DC IN 12V
Security slot
Rear panel
Power indicator
Wireless LAN indicator Warning indicator
Power button Menu button
UP button
LEFT button RIGHT button
DOWN button
Enter button
Rear panel
Remote sensor
Focus dial
Lens
Intake vents
Speaker
Exhaust vent
Control panel

5
Remote control
Preparing the remote control
A battery is pre-installed in the remote control
at the time of shipment (with insulation sheet).
Remove the insulation sheet before using the
remote control for the first time.
LEFT button RIGHT button
ENTER button
Blank screen button Input selection button
Keystone + button
Keystone - button
Volume＋button
Volume－button
MUTE button
UP button
DOWN button
Menu button
Power button
Insulation sheet

6
2USING THE PROJECTOR
Installing the projector
Decide the position to place the projector.
The distance between the projector and the screen should be between 48cm (screen
size: 25 inch) and 133cm (screen size: 68 inch).
Screen size Projection distance
Inch Width (cm) Height (cm) L(cm)
25 53.8 33.7 48
30 64.6 40.4 58
35 75.4 48.0 68
40 86.1 53.8 78
45 96.9 60.6 88
50 107.7 67.3 98
55 118.5 74.0 108
60 129.2 80.8 118
65 140.0 87.5 128
68 146.5 91.5 133
→ Refer to the instruction manual of the BOXi for detailed information.
■The values in the table are design values and may vary. Use them
as an indication only.
■The aspect ratio of the projected image in full screen is 16:10. When
the aspect ratio of the input signal is different from 16:10 (such as
16:9 or 4:3), top and bottom or left and right of the image will not be
displayed and the screen size becomes smaller than those specified
in the above table.
N o t e
L
Screen size (inch)
Width
Height

7
Connecting to a device
1. Connect the power supply (AC adapter and power cord) to the projector.
2. Connect the projector to the device such as a computer using RGB cable.
BACK
When using HDMI, use the HDMI terminal and HDMI cable (sold separately).
RGB cable
(Sold separately)
Device (such as a computer)
AC adapter
Power cord
-Connecting using RGB terminal

8
Powering on
1. Press button on the projector or the remote control.
Power indicator turns green.
(Wireless LAN indicator turns on at the same time.)
The opening screen appears.
■It will take some time before you can operate the projector after the
power is on.
■Refer to the instruction manual of the BOXi for details about the
wireless LAN indicator and functions of the wireless LAN.
Remote control
Control panel
N o t e

9
Detecting the input signal
Wait until the projector automatically detects the input signal
AUTO function to automatically detect the input signal is enabled at the time of
shipment. When the device is connected using RGB terminal or HDMI terminal,
the input signal is detected automatically.
Selecting the input signal from the menu
1. Press button on the remote control or button on the control panel.
「Input signal selection menu」appears.
2. Select the input signal using buttons.
3. Press button to execute.
Input signal selection menu
HDMI RGB USB WiFi
HDMI
RGB
Remote control
Control panel
■Take the following steps to select the input signal manually.
■Input signal selection can only be done from the menu when
USB or WiFi is selected.
■Refer to the instruction manual of the BOXi for details about
the operation.
N o t e
N o t e

10
Adjusting the projected image
Focusing the image
1. Use the focus dial to focus the image.
Correcting the keystone distortions
1. Press + or - of button on the remote control.
「Keystone adjustment dialog」appears.
2. Press + or - of button on the remote control.
Remote control
Press＋button
(
Press this button when the projection
angle is increasing.)
Press－button
(
Press this button when the projection
angle is decreasing.)
Keystone adjustment dialog
Remote control

11
Powering off
1. Press button on the projector or the remote control.
2. The message appears. Then press button again.
Power indicator turns off.
(Wireless LAN indicator turns off at the same time.)
Unplug the cable after the fan has stopped.
When the warning indicator is lit or flashing, it indicates that some malfunction
occurred to the projector. Refer to the instruction manual of the BOXi.
CAUTION
Remote control
Control panel
Press Power button again to
turn off the projector.

12
6-14, Meizen-cho, Mizuho-ku
Nagoya, 467-8567, Japan
ELMO USA CORP.
ELMO Europe SAS
Headquarters
Headquarters
1478 Old Country Road
Immeuble Elys
é
es La D
é
fense,
Plainview, NY 11803, U.S.A. 7C, Place du Dôme,
Tel. [phone] Fax.[phone]
92056 Paris La Défense, France
E-mail: [e-mail] Tel. [phone]
Web: http://www.elmousa.com
Fax. [phone]
West Coast Branch
German Branch
5676 Corporate Avenue Hansaallee 201, Haus 1
Cypress, CA 90630, U.S.A.
40549 Düsseldorf Germany
Tel. [phone] Fax. [phone] Tel. [phone]
Fax. [phone]
6X1SPJBC3(en) R0-Xex
OVERSEAS SUBSIDISRY COMPANIES