Elo Touch Solutions 17" X-Series User manual

User Manual: X-Series Rev AAiO Touchcomputer
SW602213 Rev A, Page 1 of 51
USER MANUAL
Elo Touch Solutions
15” X-Series Rev. A All-in-One Touchcomputer
17” X-Series Rev. A All-in-One Touchcomputer
SW602213 Rev. A

User Manual: X-Series Rev AAiO Touchcomputer
SW602213 Rev A, Page 2 of 51
Copyright © 2015 Elo Touch Solutions, Inc. All Rights Reserved.
No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or
translated into any language or computer language, in any form or by any means, including, but not
limited to, electronic, magnetic, optical, chemical, manual, or otherwise without prior written permission
of Elo Touch Solutions, Inc.
Disclaimer
The information in this document is subject to change without notice. Elo Touch Solutions, Inc. and its
Affiliates (collectively "Elo") makes no representations or warranties with respect to the contents
herein, and specifically disclaims any implied warranties of merchantability or fitness for a particular
purpose. Elo reserves the right to revise this publication and to make changes from time to time in the
content hereof without obligation of Elo to notify any person of such revisions or changes.
Trademark Acknowledgments
AccuTouch, CarrollTouch, Elo, Elo (logo), Elo Touch, Elo Touch Solutions, Elo TouchSystems,
IntelliTouch, IntelliTouch Plus, IntelliTouch Pro, SecureTouch, TouchTools and VuPoint are trademarks
of Elo and its Affiliates. Windows is a trademark of Microsoft Corporation.

User Manual: X-Series Rev AAiO Touchcomputer
SW602213 Rev A, Page 3 of 51
Table of Contents
Read this first .........................................................................................................4
Chapter 1: Product Overview ................................................................................6
Product Description............................................................................6
Precautions........................................................................................6
X-Series Layout..................................................................................7
X-Series Expansion Module (optional accessory) Layout.................10
Chapter 2: Getting Started...................................................................................12
Unpacking the X-Series Touchcomputer..........................................12
Adjusting the X-Series Display Title..................................................13
Touchscreen Calibrating ..................................................................14
Chapter 3: Operation............................................................................................16
General Information..........................................................................16
Front OSD Control Buttons...............................................................16
L.E.D. Functionality –POWER LED.................................................17
L.E.D. Functionality –Wireless LAN LED.........................................17
L.E.D. Functionality –Ethernet LAN LED.........................................18
Using the Input/output Panel............................................................18
Setting Up the Operating System.....................................................19
Creating the Recovery Flash Drive...................................................22
Recovering the Operating System....................................................25
Chapter 4: Options and Upgrades.......................................................................28
Adding Optional Upgrades ...............................................................28
Optional Peripherals KITs ................................................................28
Chapter 5: Technical Support..............................................................................41
Solutions to Common Problems.......................................................41
Technical Assistance........................................................................41
Chapter 6: Safety & Maintenance........................................................................42
Safety...............................................................................................42
X-Series Power Adapter Support Notice...........................................43
X-Series Care and Handling.............................................................43
Waste Electrical & Electronic Equipment..........................................44
Chapter 7: Regulatory Information......................................................................45
Chapter 8: Warranty Information.........................................................................50

User Manual: X-Series Rev AAiO Touchcomputer
SW602213 Rev A, Page 4 of 51
Read this first
Before using the X-Series All-In-One touchcomputer, read the important safety and handling
information (this section), Safety & Maintenance (Chapter 6), Regulatory Notice (Chapter 7),
and the Warranty Information (Chapter 8) chapters in this user manual.
This section provides guidance on the safe handling and use of your X-Series. Please read to
understand all of the details.
ENERGY STAR Support information
Your touchcomputer is ENERGY STAR®qualified. Elo is a partner in the
Environmental Protection Agency’s (EPA) ENERGY STAR®Program and has
designed the computer to meet the latest ENERGY STAR®guidelines for energy
efficiency.
Your touchcomputer ships with the power management options preset to a configuration that
will provide the most stable operating environment and optimum system performance.
To conserve energy, your computer is set to dim the display after 5 minutes of inactivity, and
enter the low-power Sleep mode which shuts down the system after 30 minutes of inactivity. We
recommend that you leave this and other energy saving features active, so that your
touchcomputer will operate at its maximum energy efficiency. You can wake the touchcomputer
from Sleep mode by pressing the power button.
When considering additions to your business, purchase products that have earned the
ENERGY STAR®for all your equipment needs, which can save your money, save energy, and
help protect the climate.
Visit http://www.energystar.gov or http://www.energystar.gov/powermanagement for more
information regarding the ENERGY STAR®Program.
Important safety and handling information
To avoid personal injury, property damage, or accidental damage to your Elo X-Series
(hereafter referred to as the X-Series), please read through all of the information provided in this
section before using the X-Series.
For detailed operating instructions, refer to the X-Series User Manual (this publication).
Protect your data and software:

User Manual: X-Series Rev AAiO Touchcomputer
SW602213 Rev A, Page 5 of 51
Do not delete or change the name of files or directories that were not created by you; as this
may prevent the X-Series software from operating properly.
Be aware that accessing network resources can render your X-Series vulnerable to computer
viruses, hackers, spyware, and other malicious activities that might damage your X-Series,
software, or data. It is your responsibility to ensure that your X-Series have adequate
protection in the form of firewalls, antivirus software, and anti-spyware software and keep
them up to date.
Keep electrical appliances such as an electric fan, radio, high-powered speakers, air
conditioner, and microwave oven away from your X-Series because the strong magnetic fields
generated by these appliances can damage the screen and the data on the X-Series.
Take precautions with plastic bags:
The X-Series comes with plastic packaging material.
DANGER: Plastic bags can be dangerous. Keep plastic bags away from babies and
children to avoid danger of suffocation.

User Manual: X-Series Rev AAiO Touchcomputer
SW602213 Rev A, Page 6 of 51
Chapter 1: Product Overview
This chapter provides an overview of the new Elo Touch Solutions X-Series, including the
locations of the connectors and controls, X-Series features, accessories, specifications, and
operating environment.
Product Description
The new Elo All-in-One Touchcomputers X-Series combines Elo Touch Solutions reliable
performance with the latest developments in touchscreen technology and display design. This
combination creates a natural flow of information between a user and the X-Series AiO
Touchcomputers.
The Elo Touch Solutions X-Series provides a powerful, compact, configurable, touchcomputer
in two screen sizes: 15-inch and 17-inch. These models are ruggedized and available with a
choice of industry-leading Elo touch technologies:AccuTouch (“micro bezel” resistive) or
IntelliTouch Plus (zero-bezel multi-touch surface acoustic wave), IntelliTouch (single-touch
surface acoustic wave), IntelliTouch Pro (projective capacitive). This X-Series incorporates a
24-bit color, 1024x768 (15”), 1280X1024 (17”) LCD panel to provide superior display
performance for displaying graphics and images and running applications. The X2 models are
fan-less —well-suited for environments where noise may be an issue. The X3, X5, and X7
models with the 4th generation Intel Core-i3, i5 and i7 processors and HD4600 graphics are
fan-cooled and deliver superior performance when needed.
The X-Series touchcomputers have a compact, stylish design, with a choice of configuration
and customer- installable peripheral options as well as ease of serviceability. These models
feature a powerful line-up of Intel processors, and support multiple memory and storage
configurations. Optional accessories are also available for purchase from Elo Touch Solutions.
Precautions
Follow all warnings, precautions and maintenance tips as recommended in this user manual to
maximize the life of your unit and prevent risks to user safety. See Chapter 6 for more
information on safety.
This manual contains information that is important for the proper setup and maintenance of the
X-Series All-in-One Touchcomputers. Before setting up and powering on your new X-Series,
please read through this manual in detail seriously and carefully.

User Manual: X-Series Rev AAiO Touchcomputer
SW602213 Rev A, Page 7 of 51
X-Series Layout
Figure 1. X-Series front view (left), clerk right side view (middle), and back view (right)
Figure 2. X-Series back view (up) and rear IO view (down)

User Manual: X-Series Rev AAiO Touchcomputer
SW602213 Rev A, Page 8 of 51
1
Display w/Touch SRN
12
+24V Power USB Port (X3/X5/X7 only)
2
Speaker (built-in)
13
Serial Port (RS-232)
3
Front OSD Control Buttons
14
VGA Output (D-Sub)
4
Wireless indicator LED
15
USB 3.0 Port
5
Power indicator LED
16
USB 2.0 Port (X2/X3)
USB 3.0 Port (X5/X7)
6
Stand Module
17
Ethernet LAN Port
7
Cable Cover
18
Serial Port (RJ-45)
8
Expansion Module (Optional)
19
Audio Port (Line-out)
9
Edge USB port (Accessory KITs)
20
Front USB Port
10
Kensington Lock
21
Microphone (built-in)
11
Power Connector (DC-IN)
22
Cable Exit Hole
1. Display w/Touch SRN
The main display with different touch screen solution is made by two different sizes, 15-inch and
17-inch. The touch technology is defined as below touch type for composition of the system.
- AccuTouch (“micro bezel” resistive).
- Intellitouch Plus (zero-bezel multi-touch surface acoustic wave).
- Intellitouch (single-touch surface acoustic wave).
- Intellitouch Pro (projective capacitive).
2. Speaker (built-in)
The integrated speaker provides audio output for video and music playback.
3. Front OSD Control Buttons
The front OSD control buttons provide the OSD functions control.
4. Wireless indicator LED
Flashes blue when the X-Series is connected to a Wi-Fi network and flashes blue when the
X-Series Bluetooth is on.
5. Power indicator LED
The power indicator LED is to show the state of the touchcomputer. The table below shows LED
state and corresponding colors.
6. Stand Module
The stand module is a strong design to support all 15-inch and 17-inch Elo All-In-One
Touchcomputers.
7. Cable cover
Open the back cable cover to access the system IO function ports.

User Manual: X-Series Rev AAiO Touchcomputer
SW602213 Rev A, Page 9 of 51
8. Expansion Module (Optional)
The expansion module is an option kit for additional functions of X-Series. Pls reference the
Expansion Module section for function description in detail below.
9. Edge USB Port (Accessory KITs - connection)
The edge USB port is design for X-Series optional Accessory KITs; the accessory kits can be
mounted and fixed at the edge for additional function requirement.
10.Kensington Lock
Kensington Lock is a standard anti-theft device for X-Series to protect and keep the unit safe.
11.Power Connector (DC-IN)
Plug the DC cable of theAC/DC power adapter kit into the power connector to power up the
X-Series system.
12.+24V Power USB Port (X3 / X5 / X7 only)
The +24V Power USB Port spec is design for X3/X5/X7 configuration only. The maximum
power rating of the +24V Power USB would limit to 24V@2A specification.
13.Serial Port (RS-232)
The serial port is a standard native RS-232 interface for connection.
14.VGA Output (D-Sub)
The X-Series system has a VGA output (D-Sub) to support 2nd display monitor.
15.USB 3.0 Port
The X-Series system has a two standard Super Speed USB 3.0 ports at rear IO side.
16.USB Port Configuration
- Two USB 2.0 Ports for X2 / X3 system configuration only.
- Two USB 3.0 Ports for X5 / X7 system configuration only.
17.Ethernet LAN Port
The Ethernet LAN Port has gigabyte speed capability for network of the X-Series.
18.Serial Port (RJ-45)
The serial port is a native RS-232 specification for RJ-45 interface connection.

User Manual: X-Series Rev AAiO Touchcomputer
SW602213 Rev A, Page 10 of 51
19.Audio port (Line-out)
The audio port is design for headphones (Line-out) can be connected to the X-Series system.
20.Front USB Port
The Front USB Ports are two standard USB 2.0 ports for user to easy access the USB
function when user fact to the X-series system.
21.Microphone (built-in)
The microphone port is built-in design for user can be connected to the X-Series system.
22.Cable Exit Hole
The cable exit hole is design for cable routing when the cables connect to rear port for each
function. It provides the good cable management experience for X-Series setup.
X-Series Expansion Module (optional accessory) Layout
Figure 3. X-Series expansion module clerk right side view (Left), module IO port view (middle), and back view (right).

User Manual: X-Series Rev AAiO Touchcomputer
SW602213 Rev A, Page 11 of 51
1
Expansion Module
4
+12V Power USB Port (Green)
2
Serial Port (RS-232)
5
Cash Drawer Port
3
Ethernet LAN Port
-
1.Expansion Module
The expansion module is an optional kit for X-Series touchcomputer. It is mounted to the center
of the system back cover as a peripheral port for all X-Series system.
2.Serial Port (RS-232)
The serial port is a standard native RS-232 interface for connection.
3.Ethernet LAN Port
The Ethernet LAN Port has gigabyte speed capability for network of the X-Series.
4.+12V Power USB Port
The +12V Power USB Port spec is design for Expansion Module only. The maximum power
rating of the +12V Power USB would be limited to 12V@2A specification.
5.Cash Drawer Port
The cash drawer port is a RJ-11 interface design and capable for +12V and +24V switchable
support. The default setting is at +24V and user can change the setting in system BIOS menu.

User Manual: X-Series Rev AAiO Touchcomputer
SW602213 Rev A, Page 12 of 51
Chapter 2: Getting Started
Unpacking the X-Series Touchcomputer
To unpack the X-Series:
1. Open the box.
2. Check that the following items are present and in good condition:
X-Series system unit.
Quick Install Guide
AC/DC Power adapter.
Power cable for North America, Europe, and U.K.
Cable Cover Locking Screw.
3. Remove the protection bag/cover, desiccant packs, and other packaging materials
appropriately. Please take extra caution to ensure they are not accessible by small
children.
4. Press the power button to start using the X-Series.
Figure 4. The X-Series system material package.

User Manual: X-Series Rev AAiO Touchcomputer
SW602213 Rev A, Page 13 of 51
Adjusting the X-Series Display Title
The X-Series all-in-one touchcomputer has two title positions for different scenario to use. It can
through the two screws of the stand bottom to adjust the low and high position. The title adjust
is shown as below.
Figure 5. X-Series display angle in low and high position.
X-Series 15-inch Display Title Adjustment.

User Manual: X-Series Rev AAiO Touchcomputer
SW602213 Rev A, Page 14 of 51
X-Series 17-inch Display Title Adjustment.
Touchscreen Calibrating
The touchscreen is pre-calibrated for accurate touch response.
If for any reason the touchscreen needs to be recalibrated, double-click the Elo Alignment
shortcut on the system desktop (for Windows 7)
This launches the calibration program. The window shown below opens. Follow the instructions
to calibrate the touchscreen.

User Manual: X-Series Rev AAiO Touchcomputer
SW602213 Rev A, Page 15 of 51
Note: X-Series IntelliTouch Pro (projective capacitive) models are fully HID compliant so they
do not need to be calibrated and configured. Therefore, EloConfig tool does not support
X-Series IntelliTouch Pro technology.

User Manual: X-Series Rev AAiO Touchcomputer
SW602213 Rev A, Page 16 of 51
Chapter 3: Operation
General Information
This chapter describes how to utilize the front OSD control buttons, I/O panel, and other unique
features that Elo All-in-One Touchcomputer provide.
All adjustments made to the brightness and volume controls are automatically saved. User
settings remain unchanged after powering off/on or in the case of a power failure.
Front OSD Control Buttons
The control buttons provide the following functions (from left to right).
Feature
Description
Brightness -
Decrease brightness
Brightness +
Increase brightness
Volume -
Decrease speaker volume
Volume +
Increase speaker volume
Power
Power on/off the system
Control Button
Locking
To Lock, press “Brightness +” and “Brightness -” buttons together
for 3 seconds. To unlock, perform the same procedure for another
3 seconds

User Manual: X-Series Rev AAiO Touchcomputer
SW602213 Rev A, Page 17 of 51
L.E.D. Functionality –POWER LED
The X-Series has a Power LED indicating the state of the touchcomputer. The table below
shows LED state and corresponding color.
LED Color to Observer
State
Off
No input power —Off mode
Red
Input power present —Off mode or hibernation
Orange
Input power present —Standby
Green
Input power present —Power On
L.E.D. Functionality –Wireless LAN LED
The X-Series has a Wireless LAND LED indicating the wireless status connection of the
touchcomputer. The table below shows Wireless LAN LED state and corresponding color.
Wireless State
Wireless LED Status
ON
Blue
OFF
NA

User Manual: X-Series Rev AAiO Touchcomputer
SW602213 Rev A, Page 18 of 51
L.E.D. Functionality –Ethernet LAN LED
LAN Speed State
LAN LED Status
10Mbps
No Color
100Mbps
Orange Color
1Gbps
Green Color
Activity State
ACT LED Status
No Link
No Color
Linked
Solid (Green Color)
Data Activity
Blinking (Green Color)
Using the Input/output Panel
To access the input/output (I/O) ports, remove the cable cover at the bottom of the unit. A
security screw is included and may be used to secure the cable cover to the touchcomputer.
Below are the I/O descriptions by model:
Note: As a safety precaution, always leave the cable cover door attached when the system is powered
on.

User Manual: X-Series Rev AAiO Touchcomputer
SW602213 Rev A, Page 19 of 51
Setting Up the Operating System
If configured with an operating system, the initial setup of the operating system takes
approximately 5-10 minutes. Additional time may be needed depending on touchcomputer
hardware configurations and connected devices.
To set up the Microsoft® Windows® Operating System for the touchcomputer, turn on the
touchcomputer by pressing the power button, and then follow the on-screen instructions.
Injecting a new language
Windows only allows the use of only one language at one time. But you can use the Elo Touch
Solutions language injection feature to modify your language preference. English is set as the
default language, but you can change this language to suit your preferences.
1. Power off your system completely.
2. Power on your system.
3. After the Elo splash screen (shown below), press “↑” or “↓” repeatedly to pause on
Windows Boot Manager.

User Manual: X-Series Rev AAiO Touchcomputer
SW602213 Rev A, Page 20 of 51
4. Select either Restore OS 32bit or Restore OS 64bit depending on your OS
environment.
5. The following User Interface (UI) will be presented: