Elo TouchSystems PayPoint for Android User manual

Revision F
P/N E545637
www.elotouch.com
Quick Installation Guide
Elo PayPoint® for Android
© 2017 Elo Touch Solutions, Inc. All rights reserved.
The information in this document is subject to change without notice. Elo Touch Solutions, Inc. and its Affiliates (collectively “Elo”) makes no
representations or warranties with respect to the contents herein, and specifically disclaims any implied warranties of merchantability or fitness for a
particular purpose. Elo reserves the right to revise this publication and to make changes from time to time in the content hereof without obligation
of Elo to notify any person of such revisions or changes.
No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer
language, in any form or by any means, including, but not limited to, electronic, magnetic, optical, chemical, manual, or otherwise without prior
written permission of Elo Touch Solutions, Inc.
Elo (logo) and Elo Touch Solutions are trademarks of Elo and its Affiliates.
North America
800-ELO-TOUCH
Tel [phone]
Fax [phone]
[email protected]
Europe
Tel [phone]
Fax [phone]
[email protected]
Asia-Pacific
Tel [phone]
Fax [phone]
[email protected]
Latin America
Tel [phone]
Fax [phone]
EloSales.LAT[email protected]
Elo Touch Solutions Technical Support
Online self-help:
www.support.elotouch.com
Contents:
1x PayPoint for Android
2x Receipt paper roll
1x Power cord
2x Cash drawer keys
For software development kit please visit
www.elotouch.com

Connect power and ethernet cables: Connections are
underneath the register near the back.
Install receipt paper: Install the paper by pressing the lid
release button and lifting up on the printer lid. Note the correct
paper orientation from the pictures above.
If an internet connection is not found in step 3, hold the power button
down for 3 seconds and release. This lets you enter the set-up page
to nd your WiFi connection. Under the Network Tab, select your WiFi
network. Once connected your device should start auto-provisioning itself
to your software provider. Once set up is complete, password 1elo can be
used to re-enter your control panel if needed.
Mini-USB
Ethernet
Power on the register: Press the power button. If an ethernet internet
connection is available, registration will start automatically when the
device powers on.
1
2
3
Power
4