ELRO CC60RIP11S User manual

User Manual
ELRO CC60RIP11S HD IP surveillance
camera with real white light for colour
nightview

2
HD Wi-Fi Camera with LED Light
Table of contents
(1) What’s in the box? -------------------------------03
(2) Camera Overview----------------------------------04
(3) iOS Device Operation----------------------------05
Getting Start ---------------------------------------------------------05
Internet Connection -----------------------------------------------06
Direct Connection--------------------------------------------------08
App icons/ buttons function and description------------11
Advanced Setting--------------------------------------------------13
Notice-------------------------------------------------------------------15
(4) Android Device Operation----------------------19
Getting Start ---------------------------------------------------------19
Internet Connection -----------------------------------------------20
Direct Connection--------------------------------------------------22
App icons/ buttons function and description------------25
Advanced Setting---------------------------------------------------27
Notice-------------------------------------------------------------------29
(5) Specification----------------------------------------29
(6) Camera Power LED Indication----------------30

3
What’s in the box?
WF692 Camera Power Adaptor
Screws & Anchors User Manual
Check your package to confirm that you have received the
complete system.

4
Camera Overview

5
iOS Device Operation
Getting Start
1.Go to App store to download and install ELRO Color Night
Vision IP Cam APP on your iPhone or iPad (support iOS7 or
above).
2.Install and set up the camera
1) Carefully unpack the camera
2) Attach power adapters to the cameras. Plug into power
Once power on ELRO CC60RIP11S, the power LED will start with solid
green, after 10 seconds it turns off, about 15 seconds later, it will change
to fast flash, means initialization finished.

6
3. There are two options to connect the camera with cell
phone: internet connection and direct connection
3.1 Internet Connection
1) Make sure your smart phone or tablet is connected to the same local
WiFi network (which the camera is using) and the power LED of the
camera is in fast flash mode.
2) Enter the APP, press”+” to add camera, and go to smart config

7
3) Input the local network password on the pop-up, then input camera
password（default 000000）on next pop-up, touch “save” to complete
the connection
Notice: At the first time you add a camera, to make the camera password
more secure, you need to change the password. Reset the new password
(8-16 alphanumeric characters), and “Save” your password.

8
3.2 Direct connection
1) Press the “reset” button on the camera, the power LED will stay on.
Remark: Once power on ELRO CC60RIP11S, the power LED will start
with solid green, after 10 seconds it turns off, about 15 seconds later, it will
change to fast flash, means initialize finished.
2) Go to “setting” on your cell-phone to search the camera Wi-Fi, and
connect to the camera Wi-Fi.
3) Enter the APP, and touch “+” to add the camera.

9
4) There are three ways to complete direct connection: search in local
network, QR code scan, manual input.
A: Search in Local network
Touch “Search in local network”, it will automatically search the camera DID,
then touch the selected camera and get the camera name and DID, input the
camera password (default 000000) and press “Save” to complete the
connection.

10
B. QR code scan
Touch QR code scan, and scan the QR code attached on the back of the
camera, then get the camera name and DID, input the camera password
(default 000000) and save the password.
C.Manual input
Touch Manual input, and get the camera name, input the DID attached on
the back of the camera and camera password (default 000000), then save
the password.

11
When the power LED in “stay on” mode, press and hold the camera reset
button for more than 5 seconds will change camera to factory default mode,
power LED will then be in fast flash mode.
4 In Live View
While the connection is completed, you can see the live video on the phone.
4.1 App Icons / buttons function and description

12
1 snapshot icon : Take snapshot of the image you are watching. The
picture will be saved automatically to your photo albums.
2 View icon ：Check the snapshots you took.
3 Talk-back icon : Activate the two-way communication function.
4Event list : Playback the recorded files. The recorded videos can to be
searched by time. Choose the period and search.
: Tap this button to download the event, and the file will be kept in
“PHOTO “folder. The downloaded mp4 document will be changed into MOV
format Video if you download in your computer.

13
5 Manual Recording button : Tap to activate manual recording, tap
again to stop manual recording.(manual recording lasts 2 minutes every
time, however, automatic record only lasts 15 seconds per trigger ).
6 Light icon : Turn on/ off the LED light.
7 Advanced Setting button : Enter Advanced Setting menu.
4.2 Advanced Setting
1) Video Rotation: the camera can be placed on a flat surface, wall or ceiling,
you may need to adjust the video rotation to get a better angle.
2) WLAN Networks: when your Smartphone and camera are in direct
connection, you can use WLAN network to choose a local router for the
WF692, and change the camera to internet mode.
Touch WLAN Networks and select the local network, input your local Wi-Fi
password. Press “Save” to complete setting.

14
While the camera is connected to the router and power LED in slow flash
mode,you will be able to use any Wi-Fi or GSM signal to see the video from
the app.

15
3) Light Setting: you can set duration of the camera light (off, 1 minute, 3
minutes, 10 minutes), Dimmer ( 25%, 50%, 75%,100%) and Timer( the time
for light on or off, repeat) as per your preference.
5. Notice
1 You can enter the advanced setting by tapping the icon on the right of the
connected camera. Submenus will show up, and choose the “More”. You
can adjust the advanced setting part.

16
2 Once the advanced setting is completed, please remember to press
“ Save”and “OK” to preserve the setting.
3 Default Wi-Fi Camera: press “ reset” button of the camera for more than 5
seconds and then release, the power LED will flash quickly. The default
setting completes.
4 If the camera lost connection, please press the screen and pull down, it
will automatically reconnect (refresh).

17
Android Device Operation
Getting Start
1.Go to Googleplay to download and install ELRO Color Night
Vision IP Cam APP to your Android phone or tablet (support
Android 4.1 or above).
2 Install and set up the camera
1) Carefully unpack the camera
2) Connect to a local power outlet using the included power adapter.
Once power on ELRO CC60RIP11S, the power LED will start with solid
green, after 10 seconds it turns off, about 15 seconds later, it will change
to fast flash, means initialization finished.

18
3 There are two options to connect the camera with
cell-phone: internet connection and direct connection.
3.1 Internet Connection
1) Make sure your smartphone or tablet is connected to the same local
network (which the camera is using, non-5G) and the power LED of the
camera is in fast flash mode.
2) Enter the APP, press”+” to add camera, and touch smart config

19
3) Input the local network password on the pop-up, then input camera
password（default 000000）on next pop-up, save the password to
complete connection
Notice: At the first time you add a camera, to make the camera password
more secure, you need to change the password. Reset the new password
(8-16 alphanumeric characters), and touch “Save”.

20
3.2 Direct connection
1) Press the “reset” button on the camera, the power LED will light up
continuously.
Remark: Once power on ELRO CC60RIP11S, the power LED will start
with solid green, after 10 seconds it turns off, about 15 seconds later, it
will change to fast flash, means initialization finished.
2) Press “setting” button of your device to search the camera Wi-Fi, and
connect to camera Wi-Fi
3) Enter the APP, and touch “+” to add the camera.