ELRO IP CAMERA User manual

jK
CO7000 Manual EN Version 2
USER MANUAL
FULL HD OUTDOOR IP CAMERA
Home is not a place, it’s a feeling
CO7000

- 1 -
Content
1. Introduction...........................................................................................................................- 2 -
2. Package contents...................................................................................................................- 2 -
3. Overview of the camera ........................................................................................................- 2 -
4. Camera Mounting..................................................................................................................- 3 -
5. ELRO Home Safe App.............................................................................................................- 3 -
6. Add camera ...........................................................................................................................- 4 -
7. Explanation about the camera ..............................................................................................- 6 -
8. Explanation of the settings....................................................................................................- 7 -
9. Reset......................................................................................................................................- 9 -
10. Frequently asked questions / FAQ.......................................................................................- 10 -
11. Specificaties.........................................................................................................................- 11 -
12. Symbols ...............................................................................................................................- 11 -
Go to www.elro.eu to download the latest version of this manual.

- 2 -
1. Introduction
Congratulations on your purchase of the ELRO CO7000 Outdoor Camera! This camera allows you
to keep an eye on everything outdoors. The camera can be added in the free ELRO Home Safe App.
This app allows you to control multiple cameras. This way, you put together a security system that
keeps an eye on all the important things for you. Give yourself time to read this manual carefully
before you start installing.
2. Package contents
a. 1080P Full HD Outdoor Camera
b. Mounting materials; screws and dowels
c. Power cable with adapter
d. Manual
3. Overview of the camera
1. Mounting bracket
2. Antenna
3. Camera lens
4. Day/night sensor
5. 18x Infrared LEDs
6. LAN-input
7. Adapter input
8. Reset button
9. Speaker
10. Micro SD card slot
11. Waterproof protective rubber
12. Wiring speaker (speaker is attached to protective cover)
13. Microphone

- 3 -
4. Camera Mounting
Important!
•Before you start mounting, check performance by pre-connecting the camera to the
internet and testing from the same location/position where the camera will be mounted.
•The location should be free of dust and not in view of a strong light source or direct
sunlight.
•Avoid thick walls, steel structures, double-glazed windows or other obstacles between the
camera and the Internet router. When connecting with LAN cable, this point does not
apply.
•This camera has built-in IR LEDs that allow images to be viewed in no/low light conditions.
Images will then be shown in black and white.
•Turn the supplied antenna on the back of the camera for better signal coverage.
4.1 Camera mounting
1. Mark the position of the screw holes using the mounting bracket on the wall.
2. Drill the holes and insert the 4 plugs.
3. Attach the camera, insert the screws through the mounting bracket into the dowels and
tighten the screws securely.
4. Now point the camera at the area you want to monitor.
Attention! Observe public order and point the camera only at property.
5. Connect the power adapter to the camera.
6. Press the plugs together properly.
5. ELRO Home Safe App
Download the free ELRO Home Safe app from the Google Play Store or App Store.
Read through User Agreements and Privacy Policy and accept them to
continue.
Google Play Store iOS Apple App Store
5.1 Register
If you do not yet have an account, you can register one for free.
A. Click on "Sign up".
B. Enter your country and enter the correct e-mail address.
C. Check the box next to the Privacy Policy and User Agreement. Then press ''Retrieve
Verification Code''.
D. Check if you received an e-mail with the verification code. Also check for SPAM. When
received, enter this code.

- 4 -
E. Set a new password. Use 6-20 characters with a combination of letters and numbers. Then
press ''Done''.
F. Accept all permissions to complete the registration. Once this is done, you can use the
ELRO Home Safe App.
5.2 Login
If you already have an account, you can log in with your details.
A. Click on ''Log In''.
B. Enter your country, email address and password.
C. Check the box next to the Privacy Policy and User Agreement. Press ''Log In''.
D. Now you are logged in and can use the ELRO Home Safe App.
6. Add camera
The camera can be easily added in three ways. QR-Code, wired or EZ-Mode. Follow the steps
below carefully and the camera will be added to the app within minutes.
6.1 QR Code
a. Connect the power cable to the camera and plug the adapter into the wall socket. Wait a
few seconds for the camera to say ''ELRO CO7000 Starting Up''. The camera then indicates
that it is ready to be connected by saying ''Please connect the camera to your wifi''.
b. Go to the ''Home'' tab Press the ''+'' right at the top and select ''Add device''.
c. In the left-hand row, select the ''Camera'' category and press the ''CO7000'' camera.
d. Select the QR Code option at the top right. This is a default choice and you do not need to
change anything else here.
e. When you hear ''Please connect the camera to your wifi'', you can tick the box. When this
is checked, you can press the ''Next'' button.
f. The WiFi name is filled in automatically. Then enter the password of
this network. Press ''Next''.
g. A QR-Code will now appear on the screen. Hold this QR code
approximately 20 cm in front of the camera so that the camera can
read it.
h. The camera will say ''Scanning QR-Code successfully'' when it has
succeeded. This is followed by: ''Your Wifi is Connected. Welcome
to using ELRO CO7000 Outdoor Camera''.
After this, press ''I heard a prompt''.
g. The camera is now automatically added to the app. When the addition is successful, the
app will indicate this. Then press ''Done''.
h. The camera is now successfully added to the app and will immediately play live images.

- 5 -
6.2 EZ-Modus
a. Connect the power cable to the camera and plug the adapter into the power socket. Wait a
few seconds until the camera says; ''ELRO CO7000 Starting Up''. Then the camera indicates
that it is ready to be connected by saying ''Please connect the camera to your wifi''.
b. Go to the ''Home'' tab Press the ''+'' right at the top and select ''Add device''.
c. In the left-hand row, select the ''Camera'' category and press the ''CO7000'' camera.
d. Press QR-Code at the top right and select EZ-Mode.
e. When you hear ''Please connect the camera to your wifi'', you can tick the box. When
checked, you can press the ''Next'' button.
f. The WiFi name is filled in automatically. Then enter the password of this network. Press
''Next''.
g. The camera is now automatically added to the app. When it has succeeded in connecting,
the camera says: ''Your Wifi is Connected. Welcome to using ELRO CO7000 Outdoor
Camera''. When the addition is successful, the app will indicate this. Then press ''Done''.
h. The camera is now successfully added to the app and will immediately play live images.
6.3 Cable
a. Connect the power cable to the camera and plug the adapter into the wall socket. Wait a
few seconds until the camera says; ''ELRO CO7000 Starting Up''. Then the camera indicates
that it is ready to be connected by saying ''Please connect the camera to your wifi''.
b. Then insert a LAN cable into the camera's designated port and connect the camera directly
to the internet router.
b. Go to the ''Home'' tab Press the ''+'' right at the top and select ''Add device''.
c. In the left-hand row, select the ''Camera'' category and press the ''CO7000'' camera.
d. Press QR-Code at the top right and select Cable.
e. When you hear ''Please connect the camera to your wifi'', you can tick the box. When this
is checked, you can press the ''Next'' button.
g. The camera is now automatically added to the app. When it has succeeded in connecting,
the camera says: ''Your Wifi is Connected. Welcome to using ELRO CO7000 Outdoor
Camera''. When the addition is successful, the app will indicate this. Then press ''Done''.
h. The camera is now successfully added to the app and will immediately play live images.
Important
-Connect to your router/modem's 2.4Ghz WiFi signal.

- 6 -
7. Explanation about the camera
Description of all menus and functionalities of the app.
Navigation
-Go back to the previous screen.
Full screen mode
-Ensures screen-filling and tilting of images.
Snapshot
-Tap this to take a photo. The photo is stored locally in the app and uses the smartphone's
memory.
Talk –One-way communication
-Tap this and hold down. This will allow you to speak through the smartphone's microphone
and you will be heard from the camera. When the Talk mode / Two-way call (see 8
Explanation of the settings, Talk mode) is set, the icon will change to a phone symbol.
Manual recording
-Tap this and a recording is made. Tap again to stop and save the recording. The video is
stored locally in the app and thus uses the smartphone's memory.
Functionalities
-Tap this and with menu with all functions of the camera are displayed. Press to close
the menu.
Volume muted
-Tap this and the volume is switched on. Press again to mute the volume again.
Fill screen
-Fill the image screen without tilting the image. Tap again to restore the image.
Image quality
-Sets the image quality, tap to change to and vice versa. This affects the images
and photos recorded and may affect the smartphone's memory.
Full High Definition 1920 x 1080
Standard Definition 640 x 360
Playback
-Review all recordings stored on the SD card.
Timeline
-Slide on the timeline to the moment you specifically want to watch back.
Full screen
-While recording, tap here and watch the recording in full screen.
Manual recording
-Tap this and a recording is made. Tap again to stop and save the recording. The video
is stored locally in the app and thus uses the smartphone's memory.
Snapshot
-Tap this to take a photo. The photo is stored locally in the app and thus uses the
smartphone memory.

- 7 -
Reduce timeline
-Tap here to reduce the size of the timeline. Tap again to enlarge the timeline.
Calendar
-Select a specific day to watch recordings here.
Volume muted
-Tap this and the volume is switched on. Press again to mute the volume again.
Gallery
-Review all photos and recordings stored locally in the app.
Theme Color
-Change the app's theme to a Light Mode or Dark Mode.
Night Mode
-Specify whether the camera should automatically switch between day and night vision.
This can also be switched on and off manually.
Motion Detection
-Switch on and the camera will record and send notifications when motion is detected. The
icon will turn red when the function is enabled. Further settings via general settings.
Sound Detection
-Switch on and the camera will record and send notifications when sound is detected. The
icon will turn red when the function is enabled. Further settings via general settings.
Buttons Management
-View all functions and shortcuts.
Messages
-View all recent notifications detected by the camera. Press ''All'' to view and filter more
specific moments. You can filter by (human) movement, among other things. In addition,
you can view all notifications from a specific day and delete notifications.
Cloud
-Make optional use of cloud storage. Activate a subscription of your choice.
Features
-Open the menu to view, enable or disable all functions.
8. Explanation of the settings
In the top right corner, press to go to settings.
Icon / Device name
-Change camera icon, device name and device location.
Device information
-View further information on the device.
Tap-to-run / Automation
-See all linked scenes here.

- 8 -
Basis function settings
-Change some basic functions here.
-Flip screen; rotate the screen when hanging the camera upside down.
-Talk mode; Change the direction of a communication conversation.
▪One-way communication; press and hold the microphone button
to speak through the camera.
▪Two-way conversation; communicate via smartphone and
camera like a phone call.
IR Night Vision
-Specify whether the camera should automatically switch between day and night vision.
This can also be switched on and off manually.
Detection alarm settings
-Change detection alarm settings here.
-Motion
▪Enable Motion Detection.
▪Set the sensitivity of motion detection.
▪Set an area. Change the red box of your choice and save. Press
the ''+'' to add more boxes and save.
▪Human movement filtering; Enable Human Body detection, the
doorbell will recognise ''human'' movement via AI and send a
specific notification for this.
-Sound Detection
▪Enable Sound Detection.
-Alarm Timer Settings
▪Set a schedule when the camera should record certain detection.
This can be set completely as desired.
-Alarm Interval
▪Set the notification interval. This can be set to 1min, 3min, 5min.
Alarm interval means that, for example, the camera checks for
detection every 1min and sends a notification every minute
when it is present.
Storage settings
-View the capacity of the SD card here. From here, you can also format (empty) the SD card.
Recording settings
-Change the settings for recording on the SD card.
-Local recording; Specify whether the camera should record or not. The
recorded images are saved on the SD card.
-Mute recording; No sound will be recorded.
-Recording mode; Change whether the camera should record non-stop
(continuous) or on an event (motion or sound).
-Schedule; Set a schedule when the camera should record certain detection.
This can be set completely as desired.

- 9 -
Cloud Storage
-Choose and manage a cloud subscription per camera. Further adjust the settings for the
cloud function.
Offline notification
-Enable the app to notify when the camera is offline for more than 30 minutes.
FAQ & feedback
-Quickly go to the FAQ or provide feedback on the product, app or other services.
Share device
-Share the camera with one or more users who also wish to use the camera and its
features. Sharing can be done by linking an existing ELRO Home Safe account or by sharing
a link from the camera.
Add to home screen
-Create a shortcut from the smartphone to open the camera directly, without first opening
the ELRO Home Safe and activating the camera.
Device update
-Check whether any updates are available. When they are available, you can also download
and install them from here. It is possible to have these updates installed automatically.
Restart device
-The camera will reboot.
Remove device
-Delete the camera from the app. The camera will also be reset. The camera will say ''The
reset is successful''.
9. Reset
You can easily reset the camera. This can be done in three ways.
Method 1:
Hold down the reset button (see 3 Camera Overview, 8 Reset button) and release as soon as
the camera says; ''The reset is successful''.
Then delete the camera from the app by holding the selected camera in the home screen and
then press ''Remove Device''.
Method 2:
Delete the camera from the app from the general settings (see 8 Explanation of the settings,
Remove device). The camera will say ''The reset is successful''.
Method 3:
Delete the camera from the app by holding the selected camera in the home screen and then
press ''Delete Device''. The camera will say ''The reset is successful''.

- 10 -
10.Frequently asked questions / FAQ
View all frequently asked questions on our website www.elro.eu. Is your question not among
them? Then contact our customer service team at [email protected].
Q: My wifi name is not entered automatically during installation.
A: Make sure the location feature is on. This way, the wifi name is filled in automatically.
Q: After installing a new router, my camera remains offline.
A: Reset and reinstall the camera with the data from the new internet router.
Q: How big should the hole be for cabling?
A: At least 2cm.
Q: Why is my SD card not recognized?
A: Check the camera settings and make sure the camera is recording through the SD card. Also
try inserting the SD card into the camera when it is active.
Q: Why am I not receiving notifications?
A: Make sure all notifications permissions are accepted and that the app is allowed to send you
messages.
Q: Can I add multiple cameras to the app?
A: Yes, you can add multiple and different ELRO cameras to the ELRO Home Safe App.

- 11 -
11. Specificaties
Resolution
1920 x 1080 (Full HD)
Focal length
f3.6mm
Image sensor type
1/2.7 "Full HD CMOS
Aperture
F 2.0
Angle
110° - Horizontal : 90° / Diagonal : 50°
Frame rate
Max 15fps
IR LEDs
18 units
Night-time visibility
10 m
Day and Night
IR -CUT filter auto switch
Smartphone version
iOS7 or above, Android 4.0 or above
Signal-to-Noise ratio
≥52dB
Audio Input
Built-in microphone with -38dB noise reduction
Audio Output
Built-in 8 ohm / 2W HIFI speaker
Wireless standard
IEEE802.11b/g/n 2.4G
Wireless security
WPA, WPA2
Wired standard
RJ-45 10M/100M
Power supply (adapter)
Input 100-240V AC 50/80Hz 0.3A max.
Power consumption
Output 12V/1A 12W
Storage
Less than 4W max.
Dimensions
Built-in SD card slot, max 128gb Micro SD (excl.)
Net weight
105 mm (L) x 60 mm (W) x 60 mm (H) (excl. bracket)
Density class
350g
Ambient temperature
IP66
Humidity
-20℃~+50℃
12. Symbols
Recycling and disposal: The WEEE symbol means that this product and batteries should be disposed of
separately from household waste. When this product reaches the end of its life, take it to a designated
waste collection point nearby to ensure safe disposal or recycling. Protect environment and public
health, handle natural resources responsibly!
Read the manual before use and keep it in a safe place for future use and maintenance.
Guarantee visit www.elro.eu
ELRO Europe | www.elro.eu
PO Box 9607 - Box E800
1006 GC Amsterdam - The Netherlands