ELRO HOME MONITOR User manual

C704IP.2
GB WIFI NETWORK CAMERA
DE WIFI NETZWERK-KAMERA
PL BEZPRZEWODOWA KAMERA IP
NL WIFI NETWERKCAMERA
FR CAMÉRA EN RÉSEAU WIFI
ES CÁMARA IP WIFI
TR IP AĞI KAMERASI
GR ΔΙΚΤΥΑΚΗ ΚΑΜΕΡΑ
CZ IP SÍŤOVÁ KAMERA
HU IP HÁLÓZATI KAMERA
RO CAMERĂ VIDEO REŢEA IP
HR IP MREŽNA KAMERA
IT TELECAMERA RETE IP

2
GB C704IP.2 manual 15
DE Bedienungsanleitung C704IP.2 23
PL Instrukcja C704IP.2 32
NL Handleiding C704IP.2 40
FR Manuel C704IP.2 48
ES Manual del usuario C704IP.2 57
TR C704IP.2 kılavuzu 65
GR Εγχειρίδιο της C704IP.2 73
CZ Návod k použití C704IP.2 82
HU Kézikönyv C704IP.2 90
RO Manual de utilizare C704IP.2 98
HR Priručnik C704IP.2 106
IT Manuale C704IP.2 114

3
1
Page d’illustrations
Página de ilustraciones
Resim sayfası
Σελίδα εικόνων
Strana s nákresem
Oldal ábrákkal
Pagina cu imagini
Stranica sa slikama
Pagina immagini
27 1 456 3 8
2
6
5
2
1
3 4
Illustration page
Abbildungsseite
Strona ze strumieniami obrazu
Afbeeldingenpagina

4
3
4

5
5
6

6
7
8

7
9
10

8
B
A

9
!
4
3
1
5
2
D
C

10
E
F

11
H
!
G

12
I
J K
!
!
!
!

13
1
2
3
4
2
1
1 2
L M
N O

14
1
2
P Q
R

15
C704IP.2 manual
Thank you for your purchase of the C704IP.2 network camera. We recommend that you
carefully read this manual before use in order to use your camera as quickly and easily as
possible.
You can nd the illustrations from this manual prior to this chapter.
1. Preventive measures and
safety instructions
1.1. Safety symbols used
!
Warning! A warning indicates the risk of (serious) damage to the user or the product if
the user does not carry out the procedures with care.
!
Please note! A comment makes the user aware of possible problems.
!
Tip: A tip makes the user aware of coonvenient functions and additional options.
1.1.1. Notications
!
Warning! Do not install the product outdoors or in any place where it might become
wet.
!
Warning! Do not install the product in any place that might be exposed to extreme
heat or cold.
!
Warning! Before beginning assembly, check to make sure there are no electrical wires
or water pipes running through the wall where you want to drill.
!
Warning! By removing the plug from the power outlet, you immediately cut o power
to the product; then contact the Smartwares service desk when:
• the product's hardware components are open, drilled through, damp or have
suered a hard fall;
• the adapter's power cable is frayed or open, so that the metal is showing;
• the adapter housing is damaged;
• the adapter has come in contact with moisture or liquid;
• the glass of the camera is cracked or broken;
!
Warning! It is not permitted to open the product yourself or to have it opened, neither
is it permitted to repair the product yourself or to have it repaired. This will void
the warranties. Please let any maintenance be carried out by certied maintenance
personnel.
!
Warning! Only use original accessories from the manufacturer.
!
Warning! Keep the product out of reach of children.

16
!
Warning! Disconnect the device from all power sources before cleaning it.
!
Warning! Use a clean, dry cloth to clean the product.
!
Warning! Do not use any abrasive agents, corrosive cleaning products or any
substances that contain bleach or solvents to clean the product.
!
Warning! Remove the adapter from the power outlet during storms, lightning and
whenever the product will not be used for a longer period of time.
!
Please note! Install the product as indicated in this manual. If in doubt, consult
a recognised technician and always take account of local installation codes and
regulations.
!
Please note! The camera should be kept out of direct sunlight.
!
Please note! Do not point the camera at bushes, tree branches or other moving
objects.
!
Please note! The product must not be discarded as unsorted municipal waste, it must
be disposed of separately.
!
Please note! Find out about the options in your region for disposing of the product
after use. Do not throw away electrical appliances or components, but see whether the
product (components) can be turned in, recycled or reused.
!
Please note! Wireless systems can be aected by interference from wireless
telephones, microwave ovens and other wireless devices that operate in the 2.4
GHz range. Keep the product at least 3 metres away from any possible sources of
interference during installation and operation.
!
Please note! The camera is not able to view through glass at night. Keep this in mind
when positioning it.
2. Intended use
The C704IP.2 is a security camera that makes it possible to view surveillance images via a
local network, an Internet connection or the Elro App "ELRO INSTALL" on your smartphone.
The C704IP.2 can be connected either through an Ethernet cable or a Wi-Fi connection.
Two electrical rotary shafts let you rotate the camera 360 degrees remotely. You can also
choose for this to be done fully automatically.
The camera is equipped with infrared LEDS and is able to make video and audio recordings
both during the day and at night. The camera is also outtted with motion detection and
can switch on and o via an I/O port.
3. Technical specications
3.1. General product specications
Sensor: 1/4" Colour CMOS Sensor
Resolution: 640 x 480 pixels (300k pixels)
IR Lens: f: 6mm, F 2.0
Viewing angle: 60 degrees
Minimal brightness: 0.5Lux @ F2.0
Video compression: MJPEG
Images per second: 15fps(VGA), 30fps(QVGA)
Power source: 230VAC/5VDC/2A Adapter
Energy consumption: 5W (Max.)
Temperature: 0°C ~ 55°C (32°F~131°F)
CPU: 2.0 GHZ or higher

17
Memory: 256 MB or higher
Video card: 64 MB or higher
Supported OS: Windows 98/ME/2000/XP/Vista/7/8
Supported browsers: IE6.0-10.0, Firefox, Safari, Google Chrome
Certication: CE, FCC, RoHS, R&TTE
Warranty: Limited 3-year warranty
3.2. Main component parts 1
1. C704IP.2 camera
2. Camera base
3. Detachable antenna
4. 4 assembly screws and plugs
5. DC supply
6. Ethernet cable
7. Software CD-ROM
8. User's manual
3.3. Connections 2
1. Antenna port
2. Ethernet port
3. I/O port
4. DC connection
5. Audio connection
6. Reset opening
4. Camera installation
4.1. Connecting the camera
• Screw the antenna into the antenna port 3.
• Connect the adapter cable to the DC connection of the camera 4. Then insert the
adapter plug into the power outlet.
• Connect the included ethernet cable to the network port of the camera 5. Connect
the other end of the ethernet cable to your router. The green LED on the ethernet port
will light up when the camera is connected to the network. The LED on the front of the
camera will also begin ashing.
You can now operate your IP Camera using your smartphone or PC. Go to section 4.2 for
use with smartphone and go to section 4.3 for installation on your PC.
4.2. Set for smartphone use
!
Attention! To use the “ELRO INSTALL”App, you need a smartphone with internet
access.
!
Attention! To scan a QR code, you need the“BARCODE SCANNER”app.
• Download the“ELRO INSTALL”App in the App Store or via Google Play and install it.
This manual is based on the Android version of the App.
• Start the App. The start screen of the app appears. L
• Press the“Click here to add camera”option. The“Add camera”menu appears. M

18
• Press the“Scan”button. M1 Next, scan the QR code on the bottom of your camera. You
can also choose to manually enter the code behind“UID”. M2 You can nd this code
under the QR code on your IP camera.
• Next, enter the code: 000000 after“Security code”. M3
• After“Name”enter the name you want to assign to the camera.
• Then press the“OK”button. M4
Your camera has been added to your phone and will appear on the start screen of
your App. NOn this you can see if the camera is connected (ONLINE) N1 or if it is not
connected (OFFLINE).
• For instructions on placing your camera go to section 4.6.
• For instructions on using your camera with the App go to chapter 5.
4.3. Install your camera on your PC
• Insert the included CD-ROM into your computer.
• Launch "IPCamSetup.exe" from the CD-ROM.
• Go through the installation by double clicking on "Next".
• Complete the installation by clicking on "Restart computer".
The IP camera tool is now installed on your computer. You will nd the shortcut on your
desktop.
!
Please note! Do not remove this shortcut! You will have to re-install the IP camera tool
if you do.
4.4. Linking to your camera
!
Please note! To be able to use the IP camera's full functionality, you have to use
Internet Explorer 6 or higher (32 bit) and select ActiveX Mode. It is not possible to
create audio or video recordings in other web browsers.
!
Please note! If you opt for the ActiveX mode there is a possibility that you will not have
any picture yet. If this is the case, perform the following steps:
• In Internet Explorer, go to: Tools-> Internet options-> Security settings ->Custom
level D
• Change the deactivated options to "Questions" under the ActiveX control elements
and insertion applications. If the "Questions" option is not available, tick "Activate".
See also: EFG
!
Tip: if you wish to use a dierent web browser than the standard browser, copy the
link from the open browser to a browser of your choice.
• Start the IP Camera Tool via the "IP camera tool" shortcut on your desktop. The IP
camera tool automatically searches for the IP camera(s) connected to your network.
A window opens A. This window displays all your IP cameras. If no cameras are
connected, the window will remain empty.
• Double click on the camera you want to use. In your standard web browser, an
identication window will open up asking for your user name.
• For the user name, enter "admin" and click on "sign in". You do not need to enter a
password.

19
A menu will open B. You can choose from the following options:
ActiveX Mode: Internet Explorer
Server Push Mode: Safari, Firefox and Google Chrome
VLC Mode: Internet Explorer, Safari, Firefox, Google Chrome and
Opera
!
Please note! You have to download the VLC player for VLC Mode.
Sign in mobile phone: Access with a mobile browser
• Click on "Sign In" under the option that applies to your web browser.
You are now logged in to the Network Camera browser screen C. You can manage your
camera and camera settings via this screen. (see chapter 6)
4.5. Linking to your camera wirelessly
!
Please note! In order to set up a wireless connection, your camera must be linked to
your network via the included ethernet cable during set-up.
!
Please note! You need a wireless router in order to establish a wireless connection with
your camera.
!
Please note! If your router is password protected, you will need to know the password.
• In the Network Camera browser screen Cclick on the "Network" tab. A list of settings
will appear H.
• Select the Wireless Lan Settings: the Wireless Lan Settings screen will appear.
• Double-click on "scan" in the Wireless Lan Settings screen. A list of available wireless
networks will appear.
• Click on your wireless network.
• If you do not require a password for your wireless network, just click on 'submit' after
this.
• If your wireless network does require a password, you will need to enter your password
after "Share Key" or "key1", depending on the encryption.
• Click on 'submit' after this.
The camera restarts automatically when you click 'submit'. This takes approximately 30
seconds.
• Close your browser and camera tool after the computer has restarted.
• Remove the network cable from the camera.
• Open the IP camera tool and click on your camera's address. You can now operate your
camera wirelessly.
• If your camera is not in the camera tool window, right click on the tool window, then
press the "refresh camera list" option.
4.6. Camera installation
!
Please note! Make sure that the camera functions properly in the chosen location
before starting installation.
You can choose to place the camera on a at surface, or to attach the camera to the
location of your choice with screws.
You can install the camera either with or without the base.

20
4.6.1. Installing the camera without the base 6
• Screw two of the included screws into the surface where you want to mount the
camera, 68 mm apart.
!
Please note! If the surface is too hard for the screws (stone/concrete), you will need to
drill holes and use the screw plugs which are included.
• Use the two slots on the bottom of the camera to mount the camera on the screws.
4.6.2. Installing the camera with the base
• Unscrew the hinge on the base until loose. 7
• Adjust the angle of the base as desired. Then tighten the hinge again.
• Screw the base of the camera into the surface of your choice, using two of the included
screws. 8
!
Please note! If the surface is too hard for the screws (stone/concrete), you will need to
drill holes and use the screw plugs which are included.
• Then screw the camera onto the base, using the knob underneath the base. 9
5. Managing your camera using your
smartphone
Make sure your camera(s) is/are connected to your smartphone via the ELRO INSTALL App
(see section 4.1 and 4.2).
5.1. View your camera image on your mobile
• On the initial screen of the App press the camera you want to manage. NThe camera
picture appears on your smartphone. O
• Swipe your nger across the screen to zoom in and out and to move the camera image.
!
Attention! If you do not have a picture it is possible that your wireless connection is
not fast enough. In that case change the resolution of your camera image (see section
5.2)
The camera screen provides a number of options:
• Press the“Snapshot”button O1 to make a snapshot of your camera image.
• Press the“mute/listen/speak” button O2 to adjust your sound settings.
5.2. Changing camera settings
• On the start screen of your App press the arrow button next to the camera you want to
manage. N2 A menu with options opens. P
• Press the“Edit camera”button and then the “Advanced settings”button. OThe
“Advanced settings”window opens. RIn the “Advanced settings”window you can
change a number of properties of the camera.
The main functions are described below:
Modify security code R1 : Adjust the code of your camera. The default code is:
000000.
Video Quality R2 : Adjust the resolution of your camera. If you have a slow
wireless connection, you need to change this setting to
“MIN”.