EMC Security Connect+ User manual

Connect+
quick reference guide
1. To set your alarm when leaving home:
a. Close doors and windows until no zones show open.
b. Press the icon that says ARM AWAY .
c. The keypad will begin to beep. Exit the home, close the door, and
lock it behind you.
2. To disarm the system when you return home:
a. Press the icon that says DISARM and enter your four-digit user code.
3. To set the alarm with a delay when at home:
a. Close doors and windows until no zones show open.
b. Press the icon that says STAY .
4. In the morning, or before opening any protected door or window:
a. Press the icon that says DISARM , and then enter your four-digit
user code.
5. To set the alarm when at home with no delay:
a. Press the clock icon (top right). The display should change to
INSTANTLY .
b. Press the STAY icon.
6. If an alarm has been triggered:
a. Before proceeding, verify that the alarm was triggered accidentally.
If you aren’t sure, wait for the phone call from central station.
b. If accidental, press the icon that says DISARM and enter your
four-digit user code. This will silence the alarm and cancel
dispatch.
Continued on Back

7. To turn the door chime on or off:
a. Swipe right.
b. Press the icon that says SETTINGS then enter code.
c. Press the icon that say PANEL. Press blue slide to turn chime on or off.
8. To change your four-digit master code: Go to https://alulaconnect.com
a. Login with the Username and Password
b. After the login click on Users
c. Click on Edit beside your name
d. Click on Devices
e. Click on Edit Panel User
f. Enter a New Pin
g. Click on Ok
h. Your new code should work in about 30 sec.
The manufacturer of your security system recommends that you test it weekly to ensure
that the system is communicating fully with the Monitoring Station in the event that an
alarm is triggered. If for any reason you feel your security system is not functioning
properly, do not hesitate to call our office at 770-963-0305. We have technicians
available to assist you twenty-four hours per day.