emerio FH-117208 User manual

FH-117208
Construction fan heater (EN)
Bauheizlüfter (DE)
Radiateur soufflant pour chantiers de construction (FR)
Värmefläkt (SE)
Bouw ventilator kachel (NL)
Struktura wentylatora (PL)

- 1 -
Content –Inhalt –Teneur –Innehåll –Inhoud –Treść
Instruction manual –English ......................................................................................- 2 -
Bedienungsanleitung –German .................................................................................- 9 -
Mode d'emploi –French ..........................................................................................- 17 -
Bruksanvisning –Swedish ........................................................................................- 25 -
Gebruiksaanwijzing –Dutch.....................................................................................- 33 -
Instrukcja obsługi – Polish........................................................................................- 41 -

- 2 -
Instruction manual –English
Thank you very much for purchasing our products. In order to
ensure correct operation, please read this manual and
instruction carefully before use.
This product is only suitable for well insulated spaces or
occasional use.
IMPORTANT INSTRUCTIONS
When using electrical appliances, basic precautions should
always be followed to reduce the risk of fire, electric shock,
burns and other injuries.
1. This appliance can be used by children aged from 8 years
and above and persons with reduced physical, sensory or
mental capabilities or lack of experience and knowledge if
they have been given supervision or instruction concerning
use of the appliance in a safe way and understand the
hazards involved.
2. Children shall not play with the appliance.
3. Cleaning and user maintenance shall not be made by
children without supervision.
4. Children of less than 3 years should be kept away unless
continuously supervised.
5. Children aged from 3 years and less than 8 years shall only
switch on/off the appliance provided that it has been
placed or installed in its intended normal operating
position and they have been given supervision or
instruction concerning use of the appliance in a safe way
and understand the hazards involved. Children aged from 3
years and less than 8 years shall not plug in, regulate and
clean the appliance or perform user maintenance.
6. CAUTION —Some parts of this product can become very
hot and cause burns. Particular attention has to be given
where children and vulnerable people are present.
7. If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified

- 3 -
persons in order to avoid a hazard.
8. WARNING: In order to avoid overheating, do not cover the
heater.
9. The heater must not be located immediately below a socket
outlet.
10. Do not use this heater in the immediate surroundings of a
bath, a shower or a swimming pool.
11. Make sure the appliance is in good condition after remove
it from the package.
12. Check your mains voltage; it must match the specification
of this heater.
13. Check the power cord and plug carefully before use to
ensure that they are not damaged.
14. Be sure the power is turned off before unplugging the
heater. Do not touch the plug with wet hands.
15. Don't cover the heater.
16. Don't allow moisture and dust to enter the appliance. Don't
use this heater in bathrooms or laundries. Store it in dry
areas.
17. Don't put the heater on soft surfaces such as beds or sofas.
18. Children must not play with or plug in the heater. Keep
children away from the package. Polyethylene bags can be
dangerous.
19. Avoid using extension cords, as they may cause a fire
hazard due to overheating.
20. Indoor use only.
21. Do not allow the power cord to hang (e.g over the edge of
a table or counter) or place/run the power cord under rugs,
carpeting, or in high-traffic areas where it may be tripped
over or pulled.
22. Do not plug or unplug the appliance from the electrical
outlet with a wet hand.
23. Do not put any stress on the power cord where it connects
to the appliance, as the power cord could fray and break.
24. Keep the power cord and product always away from
heated surfaces.
25. Do not insert any other objects into the heater, as it may
cause an electric shock, fire or damage to this appliance.

- 4 -
26. Do not use this appliance to dry or heat clothing, shoes,
pipes or any other items.
27. Use the appliance in a well-ventilated area, this heater is
hot when in use, to avoid burns, do not let bare skin touch
a hot surface, if provided, use handle when moving this
heater, keep combustible materials, such as furniture
pillows, bedding, paper, clothes, and curtains at least 4 feet
( 1.2 meters) from all sides of the heater.
28. Use this heater only as described in the manual, any other
use not recommended by the manufacturer may cause fire,
electric shock or personal injury.
29. Do not operate the heater with a damaged cord or plug.
After the heater malfunctions or has been dropped or
damaged in any manner, return the appliance to a service
facility for examination, electrical or mechanical
adjustment or repair.
30. The appliance should not be operated by means of an
external timer-switch or by means of a separate system
with remote control not originally belonging to this
appliance.
31. This heating device is not suitable for assembling in vehicles
and machines.
32. The rotor guard shall not be disassembled/opened to clean
the rotor blades.
33. This appliance is not a toy.
34. Do not immerse the unit in water.
35. To avoid the risk of fire or electric shock do not remove the
housing.
36. Any servicing other than cleaning and user maintenance
should be performed by an authorized service
representative only.
37. Means “DO NOT COVER “.

- 5 -
FH-117208 EN
PARTS DESCRIPTION
1. Control panel
2. Digital display
3. Remote control
4. Air outlet
5. Base
6. Fireplace illumination
7. Remote control storage
8. Air inlet
9. Power switch
Control panel
a. ON/OFF button
b. Power setting button
c. ECO button
d. Oscillation button
e. Fireplace illumination button
f. Timer button
g. Temperature button
ASSEMBLY
Remove the appliance from the packaging. Upside the appliance body. Attach the base onto the bottom of the
body and fix with the four tabs buckled firmly.
OPERATION
Plug the appliance into an appropriate electrical outlet. Turn on the appliance by pressing the power switch.
Beep sound will be heard. The appliance is standby with the icon “ ” illuminate on the digital display. Press
the on/off button on the control panel to start setting your heater.
1. On/off button
Press the button “ ” to run your heater under low heating power with icon “ ” illuminating on digital
display. The digital display shows the set temperature 25℃by default. Once the set temperature is reached, the
appliance will stop working. Press the button “ ” again, the digital display will count down from 10 to 0 to
shut down the appliance.
2. Oscillation button
Under working condition, you can press button “ ” to activate or deactivate the swing function. The digital
display will show icon “ ” lighted on when swing function is activated. When temperature is reached and
appliance stops working, the oscillation will also stop and only restart when the appliance starts working again.
You cannot activate the oscillation when the appliance is not working.

- 6 -
3. Timer / Temperature button
Timer: Press the button or to set the timer from 0 –24hours (0 = no timer). The corresponding
timer value with a symbol “h” will be shown on the digital display. The set timer will be activated in 5 seconds
without any other operation and then the digital display will show back the set temperature.
Temperature: Press the button or to set the temperature from 15 –35℃. The corresponding
temperature value with a symbol “SET℃”will be shown on the digital display. The set temperature will be
activated in 5 seconds without any other operation.
Note:
1) After timer and temperature are set, the digital display will show the set time and temperature alternatively.
If you do not set the timer and only set the temperature, the digital display will show the set temperature
only.
2) Once the timer is counting down to 0 (not shown on digital display), the appliance will stop working
automatically and enter into standby mode.
3) Once the set temperature is reached, the appliance will stop working, as well as the swing function if you
have set before. Once the room temperature is lower than the set temperature by 2℃, the appliance will
resume working automatically, as well as the swing function if you have set before. If you have set the timer,
please note the time for standby mode will not be counted as the set time.
4) This appliance begins to sense the room temperature in 10 seconds after the appliance is turned on, so even
your set temperature is already above the current room temperature, the appliance will still work for 10
seconds and then turn off automatically.
4. Power setting button
Under working condition, you can press button “ ” to switch the power setting between low heating power
and high heating power. This button is inactive when the appliance stops working.
-Low heating power: Icon “ ” will be shown on the digital display.
-High heating power: Icon “ ” will be shown on the digital display.
5. ECO button
Under working condition, you can press button “ ” to switch the appliance into ECO mode. The icon “ ”
will illuminate on the digital display. When the ECO function is operating, the button “ ” and temperature
adjustment are not active. You can press button “ ” again to exit form ECO mode.
When appliance is in ECO mode, the temperature will be set at 22℃by default. Under this condition, when the
room temperature is lower than 18℃, the high heating power works automatically; when the room temperature
is higher than 18℃but lower than 22℃, the low heating power works automatically. When the room
temperature reaches 22℃, the appliance stops working automatically.
6. Fireplace illumination button
Press the button “ ” to turn on or turn off the fireplace illumination.

- 7 -
ELECTRIC MEMORY FUNCTION
After use, switch off the appliance but not unplug it. Under this condition, if you turn on the appliance again, the
appliance will keep working with the functions set last time, except for the timer function.
CONTINUOUS MODE FUNCTION
If the appliance keeps working for more than 1 minute without changing any settings, the digital display will be
darkened, and then return to its original brightness after any manual operations.
REMOTE CONTROL
This unit has a remote control. One piece of CR2032 battery should be used for it. Follow bleow illustration to
place or remove battery. Pay attention to the battery polarity when placing the battery.
The functions of the remote control buttons are listed below. You can store the remote control in the recess
provided on the rear panel.
1. ON/OFF button
2. Fireplace illumination button
3. Temperature adjustment (up “+”)
4. Temperature adjustment (down “-”)
5. Timer adjustment (up “+”)
6. Timer adjustment (down “-”)
7. Mode seletion button
(Press it to switch among “low heating power”, “high heating
power” and “ECO mode”.)
8. Oscillation button
SAFETY SYSTEM
The appliance has a safety system which automatically switches off the unit when overheated.
If overheating occurs, switch off the appliance, remove the plug from the socket, and let it cool down for at
least 30 minutes. Put the plug in the socket and switch on the heater.
This heater is equipped with a tilt protection safety device. For safety reasons, the unit will automatically
switch off the power if it is put on unstable or uneven surfaces or if it is tilted accidentally.
CLEANING AND MAINTENANCE
Before maintaining, please unplug the appliance and make sure the heater has cooled down completely.
Please use soft cloth to wipe the dust on the appliance’s surface.
Do not use gasoline, thinner and any other abrasive cleaners to clean the appliance, as these can damage
the surface of appliance.
Make sure the appliance is cooled and dried before packaging. Store it in dry and ventilated places.

- 8 -
TECHNICAL DATA
Operation voltage: 220-240V ~ 50/60Hz
Power: 2000W
GUARANTEE AND CUSTOMER SERVICE
Before delivery our devices are subjected to rigorous quality control. If, despite all care, damage has occurred
during production or transportation, please return the device to your dealer. In addition to statutory legal rights,
the purchaser has an option to claim under the terms of the following guarantee:
For the purchased device we provide 2 years guarantee, commencing from the day of sale. If you have a defective
product, you can directly go back to the point of purchase.
Defects which arise due to improper handling of the device and malfunctions due to interventions and repairs
by third parties or the fitting of non-original parts are not covered by this guarantee. Always keep your receipt,
without the receipt you can’t claim any form of warranty. Damage caused by not following the instruction manual,
will lead to a void of warranty, if this results in consequential damages then we will not be liable. Neither can we
hold responsible for material damage or personal injury caused by improper use or if the instruction manual are
not properly executed. Damage to accessories does not mean free replacement of the whole appliance. In such
case please contact our service department. Broken glass or breakage of plastic parts is always subject to a charge.
Defects to consumables or parts subjected to wearing, as well as cleaning, maintenance or the replacement of
said parts are not covered by the warranty and are to be paid.
ENVIRONMENT FRIENDLY DISPOSAL
Recycling –European Directive 2012/19/EU
This marking indicates that this product should not be disposed with other household wastes. To
prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle
it responsibly to promote the sustainable reuse of material resources. To return your used device,
please use the return and collection systems or contact the retailer where the product was purchased. They can
take this product for environmental safe recycling.
BATTERY MUST BE RECYCLED OR DISPOSED OF PROPERLY. DO NOT OPEN. DO NOT DISPOSE
OR IN FIRE OR SHORT CIRCUIT.
Emerio Deutschland GmbH (no service address)
Höffer Weg 14
51519 Odenthal
Germany
Customer service:
T: [phone]
E: [e-mail]