Emerson Bettis XTE3000 User manual

Quick Start Guide
FCIM-20009-EN Rev. 0
March 2023
Bettis XTE Electric Actuator – RDM
Quick Start Guide

Quick Start Guide
FCIM-20009-EN Rev. 0
Notes
March 2023
This page intentionally left blank

i
Quick Start Guide
FCIM-20009-EN Rev. 0
Table of Contents
March 2023
Table of Contents
Table of Contents
Section 1: XTE3000 with Remote Display
Module (RDM) Overview
XTE3000 with Remote Display Module (RDM) Overview ................................................1
Section 2: XTE3000 – RDM Wiring Connection
XTE3000 – RDM Wiring Connection...............................................................................2
Section 3: XTE3000 – RDM Power Requirement
XTE3000 – RDM Power Requirement .............................................................................4
Section 4: XTE3000 – RDM Communication Cable Requirement
XTE3000 – RDM Communication Cable Requirement ....................................................5
Section 5: XTE3000 – RDM Parts List and Option Kits
XTE3000 – RDM Parts List and Option Kits .....................................................................6
Section 6: XTE3000 – RDM Operation Method
XTE3000 – RDM Operation Method ...............................................................................7
Section 7: XTE3000 – RDM Functional Table
XTE3000 – RDM Functional Table.................................................................................10

Quick Start Guide
FCIM-20009-EN Rev. 0
Notes
March 2023
This page intentionally left blank

Quick Start Guide
FCIM-20009-EN Rev. 0
March 2023
1
Section 1: XTE3000 with Remote Display Module (RDM) Overview
XTE3000 with Remote Display Module (RDM) Overview
Section 1: XTE3000 with Remote Display
Module (RDM) Overview
RDM module allows actuator to be remote controls, local control and monitors the status
of actuator through RS485 communication up to 4000 ft (1200) distance from XTE3000
electrical actuator.
Figure 1

A1 A2 A3 A4 A5 A6
RDM+ RDM- Shield
24 V DC
110 to 220 V AC
50/60 Hz
Quick Start Guide
FCIM-20009-EN Rev. 0
March 2023
2
Section 2: XTE3000 – RDM Wiring Connection
XTE3000 – RDM Wiring Connection
Section 2: XTE3000 – RDM Wiring Connection
Bettis electrical actuator XTE3000 with RDM card VAXTE-494MOD3400 provides one channel
of MODBUS at A1, A2, A3 terminal and one channel of RDM port at A4, A5, A6. The wiring
connection between XTE3000 to RDM module shows in Figure 2 and RDM module has 2
options to be powered.
Figure 2

Quick Start Guide
FCIM-20009-EN Rev. 0
March 2023
3
Section 2: XTE3000 – RDM Wiring Connection
XTE3000 – RDM Wiring Connection
a) RDM power by external single phase 110 V to 220 V AC, 50/60 Hz
• AC Line connect to pin1 on P2 connector
• AC Neutral connect to pin2 on P2 connector
• Connect RS485(+) from A4 to pin 3 (RDM+)
• Connect RS485(-) from A5 to pin 5 (RDM-)
• Connect Shield from STC24 to pin 4 (RDM)
b) RDM power by external 24 V DC
• 24 V DC(+) connects to pin10 on P2 connector
• 24 V DC(-) Ground connects to pin2 on P2 connector
• Connect RS485(+) from A4 to pin 3 (RDM+)
• Connect RS485(-) from A5 to pin 5 (RDM-)
• Connect Shield from STC24 to pin 4 (RDM)

Quick Start Guide
FCIM-20009-EN Rev. 0
March 2023
4
Section 3: XTE3000 – RDM Power Requirement
XTE3000 – RDM Power Requirement
Section 3: XTE3000 – RDM Power Requirement
RDM can be power by external power 24 V DC (+/-10%) or single phase 110 V to 220 V AC
(+/-10%) 50/60 Hz and the nominal power consumption of RDM is 10 Watts and maximum is
14 Watts.

Quick Start Guide
FCIM-20009-EN Rev. 0
March 2023
5
Section 4: XTE3000 – RDM Communication Cable Requirement
XTE3000 – RDM Communication Cable Requirement
Section 4: XTE3000 – RDM Communication
Cable Requirement
With the best performance, A4, A5, A6 communication cable requires using Belden 9841
(or equivalent) for RS485 communication.

Quick Start Guide
FCIM-20009-EN Rev. 0
March 2023
6
Section 5: XTE3000 – RDM Parts List and Option Kits
XTE3000 – RDM Parts List and Option Kits
Section 5: XTE3000 – RDM Parts List and
Option Kits
XTE3000 with RDM is option item from Standard XTE3000 unit.
Option: XTE RDM upgrade kits is also available, “480KAMOD45” for XTE 10/20/30 size,
“480KAMOD46” for XTE 40/50 size.