Emerson RXi User manual

Quick Start Guide
GFK-3071C
December 2020
RXi –Industrial Monitor

i RXI Industrial Monitor Quick Start Guide GFK-3071C
Caution Notes as Used in this Publication
WARNING
Warning notices are used in this publication to emphasize that hazardous voltages, currents, temperatures, or other
conditions that could cause personal injury exist in this equipment or may be associated with its use.
In situations where inattention could cause either personal injury or damage to equipment, a Warning notice is used.
CAUTION
Caution notices are used where equipment might be damaged if care is not taken.
Note: Notes merely call attention to information that is especially significant to understanding and operating the equipment.
These instructions do not purport to cover all details or variations in equipment, nor to provide for every possible
contingency to be met during installation, operation, and maintenance. The information is supplied for informational
purposes only, and Emerson makes no warranty as to the accuracy of the information included herein. Changes,
modifications, and/or improvements to equipment and specifications are made periodically and these changes may or
may not be reflected herein. It is understood that Emerson may make changes, modifications, or improvements to the
equipment referenced herein or to the document itself at any time. This document is intended for trained personnel
familiar with the Emerson products referenced herein.
Emerson may have patents or pending patent applications covering subject matter in this document. The furnishing of
this document does not provide any license whatsoever to any of these patents.
Emerson provides the following document and the information included therein as-is and without warranty of any kind,
expressed or implied, including but not limited to any implied statutory warranty of merchantability or fitness for
particular purpose.

ii RXI Industrial Monitor Quick Start Guide GFK-3071C
Contents
Regulatory Information..............................................................1
Intended Use ................................................................................................................ 1
I/O and Connectors.....................................................................2
Connecting Input Power (24V DC-in)................................................................. 2
DC_IN1............................................................................................................... 2
HDMI (HDMI Input)............................................................................................. 3
DP1 (Display Port Input) .................................................................................... 3
DP2 (Display Port Output).................................................................................. 4
CN6 (USB 2.0) ................................................................................................... 4
CN7 (Line Out) ................................................................................................... 4
LED Indicators .............................................................................................................. 5
Operation Status LEDs (Screen)........................................................................ 5
OSD ..............................................................................5
AD Board OSD Functions .................................................................................. 5
Enter Burn-in Mode ............................................................................................ 5
Exit Burn-in Mode............................................................................................... 6
OSD Controls ............................................................................................................... 6
OSD Keypad ...................................................................................................... 6
Virtual OSD Keypad ........................................................................................... 6
Main Menu .................................................................................................................... 7
Picture ................................................................................................................ 7
Display................................................................................................................ 8
Color ................................................................................................................ 8
Input ................................................................................................................ 9
Audio ................................................................................................................ 9
Other .............................................................................................................. 10
Mounting Information..............................................................11
Panel Mount ............................................................................................................... 11
Panel Cutout Dimensions................................................................................. 11
Installation Steps .............................................................................................. 12
Mounting to Modular Display ...................................................................................... 13
VESA Mount ............................................................................................................... 14
Technical Support & Contact Information .................................17

1 RXI Industrial Monitor Quick Start Guide GFK-3071C
Regulatory Information
The FCC requires the following note to be published according to the FCC guidelines:
NOTE: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
CAUTION
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority
to operate the equipment.
Industry Canada requires the following to be published: CAN ICES-3 (A)/NMB-3 (A)
Intended Use
The RXi Industrial Monitor is intended for use in industrial environments only. Adherence to supplied documentation is part
of the intended use. Installation, commissioning, and maintenance shall be carried out by qualified personnel. For more
information, please consult GFK-3163, RXi2 LP/ RXI Display Installation and Maintenance Requirements.

2 RXI Industrial Monitor Quick Start Guide GFK-3071C
I/O and Connectors
Figure 1: Jumpers and Connectors Location
Connecting Input Power (24V DC-in)
To connect to power, follow these steps:
1. Verify that the power cable is not energized.
2. Loosen the screw clamps on the mating power connector.
3. Strip the insulation from the power cables.
4. Secure the power cable to the mating connector, noting polarity, and tighten the
screw clamps. The torque for the attaching screws is 0.3 Nm (2.26 in-lb).
5. Apply dc power to the unit. During normal startup and operation, the LED status indicator displays as follows:
•Solid amber while the RXi - Industrial Display unit is starting up
•Solid green during normal operation
6. Once power is applied, the unit begins initializing. The first thing to display is the splash screen.
Be sure to connect a DC power cord to this 3-pin power connector. Using a voltage out of the range may fail to boot
the system or cause damage to the system board.
DC_IN1
(3.5mm Pitch 1x3 Pin Connector), DC24V power input connector
Pin #
Power Input
Pin1
DC+24V
Pin2
Ground
Pin3
FG

3 RXI Industrial Monitor Quick Start Guide GFK-3071C
HDMI (HDMI Input)
(HDMI Connector), High Definition Multimedia Interface connector, provide high-quality video and audio input.
Figure 2: HDMI Layout
Signal Name
Pin#
Pin#
Signal Name
DATA2+
1
2
DATA2 Shield
DATA2-
3
4
DATA1+
DATA1 Shield
5
6
DATA1-
DATA0+
7
8
DATA0 Shield
DATA0-
9
10
CLK+
HDMI CAB DET
11
12
CLK-
NC
13
14
NC
HDMI SCL
15
16
HDMI SDA
GND
17
18
HDMI 5V
HDMI HPD
19
DP1 (Display Port Input)
(Display Port Connector), Display Port Interface connector, provide high-quality video and audio input.
Signal Name
Pin#
Pin#
Signal Name
LANE3-
1
2
GND
LANE3+
3
4
LANE2-
GND
5
6
LANE2+
LANE1-
7
8
GND
LANE1+
9
10
LANE0-
GND
11
12
LANE0+
GND
13
14
GND
AUX_CHP
15
16
DP CAB DET
AUX_CHN
17
18
DP HPD
RETURN
19
20
DP 3.3V

4 RXI Industrial Monitor Quick Start Guide GFK-3071C
DP2 (Display Port Output)
(Display Port Connector), Display Port Interface connector, provide high-quality video and audio output.
Signal Name
Pin#
Pin#
Signal Name
LANE0+
1
2
GND
LANE0-
3
4
LANE1+
GND
5
6
LANE1-
LANE2+
7
8
GND
LANE2-
9
10
LANE3+
GND
11
12
LANE3-
GND
13
14
GND
AUX_CHP
15
16
GND
AUX_CHN
17
18
DP HPD
RETURN
19
20
DP 3.3V
CN6 (USB 2.0)
(2.0mm 1x9 Pin wafer connector), For external USB2.0 signal.
Figure 3: USB 2.0
Pin #
Signal Name
1
USB 5V
2
USB-
3
USB+
4
GND
CN7 (Line Out)
(Diameter 3.5mm Jack), Line Out audio port. Line Out can be connected to headphones, speakers, or an amplifier.
Figure 4: Line Out

5 RXI Industrial Monitor Quick Start Guide GFK-3071C
LED Indicators
Operation Status LEDs (Screen)
All RXi Industrial Displays have a tri-color LED built into the screen that provides a visual indication of the operation status.
LED State
System State
Amber, Solid
Operating system starting
Green, Solid
Normal operating state
Green, Blinking
Backlight off
Red, Blinking
Backlight failure
Off
Power not applied to the unit
OSD
AD Board OSD Functions
Figure 5: AD Board OSD Functions Legend
Power switch: To turn ON or OFF the power
Shift the icon to the left side or shift it up
Shift the icon to the right side or shift it down
Menu: To enter the OSD menu for related icon and item
Auto Button: One-touch auto adjustment
Enter Burn-in Mode
Before entering the burn-in mode, first, disconnect the AC power cord, then press and hold the buttons, then
release after the AC power cord is connected and the “RGB” appears on the top left corner of your screen. Now it can be put
into the burn-in mode for changing colors.

6 RXI Industrial Monitor Quick Start Guide GFK-3071C
Exit Burn-in Mode
Before exiting burn-in mode, please first disconnect the AC power cord, then press the button (If for any reason
this button is non-functional, press and hold the button) until the AC power cord is connected. Do not release
the button until the AC power cord is connected again and the wording of “RGB” appears on the top left corner of
your screen, then wait for 3 seconds. If there is no input plugged into the unit, the “CABLE NOT CONNECTED”
message will denote that it has successfully left burn-in mode.
If unable to exit Burn-in Mode
If the RGB is still on the top left corner of the screen, press to enter Miscellaneous and choose Reset, and then select Yes,
and press . When the screen goes black, disconnect power and repeat the above steps.
If the RGB is not found, disconnect the AC power cord first, then press and hold the buttons until the AC power cord
is connected, and wait for 2 to 3 seconds. When RGB appears, repeat the above steps.
OSD Controls
OSD Keypad
To make any adjustment to the settings of the Industrial Monitor, select the following:
1. Press (Menu) to show the OSD menu or dismiss the OSD menu.
2. Select the icon that you wish to adjust with the ( / or +/-) key in the menu.
3. Press (Menu) and then choose the item with the ( / or +/-) key.
4. Press (Menu) and then adjust the quality with the ( / or +/-) key.
Virtual OSD Keypad
Figure 6: Virtual OSD Keyboard

7 RXI Industrial Monitor Quick Start Guide GFK-3071C
Main Menu
Picture
Figure 7: Picture Menu Options
Menu Items
Descriptions
AutoBacklight
Adjusts the brightness of the screen based on the brightness level of
the video in use
Backlight
Adjusts the brightness of the display
Brightness
Adjusts the colors levels to simulate brightness
Contrast
Adjusts the scale factor (gain) to the red, green, and blue signals
Sharpness
Adjusts the clarity of a display’s picture or text

8 RXI Industrial Monitor Quick Start Guide GFK-3071C
Display
Figure 8: Display Menu Options
Menu Items
Descriptions
AutoAdjust
The screen will calibrate the display to show the best screen
orientation and position
H Position
Moves the screen left or right (horizontally)
V Position
Moves the screen up or down (vertically)
Disp Rotate
Rotates the display orientation (landscape/portrait)
Color
Figure 9: Color Menu Options
Menu Items
Descriptions
Panel Uniformity
Adjusts color consistency across the screen
Gamma
Adjusts gamma value
Temperature
Adjusts temperature value
Color Effect
Adjusts color effect

9 RXI Industrial Monitor Quick Start Guide GFK-3071C
Input
Figure 10: Input Menu Options
Menu Items
Descriptions
Auto Select
Automatically displays input from whichever ports are supplying media
DP
Manually displays input from DisplayPort port
HDMI
Manually displays input from HDMI port
Audio
Figure 11: Audio Menu Options
Menu Items
Descriptions
Volume
Increases or decreases the volume level
Mute
Toggles volume on or off

10 RXI Industrial Monitor Quick Start Guide GFK-3071C
Other
Figure 12: Other Menu Options
Menu Items
Descriptions
Reset
It will reset the values to original/ default values.
Menu Time
Adjusts the time that the menu will remain on-screen after pressing
the menu button.
OSD H Position
Moves the virtual OSD menu left or right (horizontally)
OSD V Position
Moves the virtual OSD menu up or down (vertically)

11 RXI Industrial Monitor Quick Start Guide GFK-3071C
Mounting Information
Panel Mount
The RXi Industrial Monitor can be panel-mounted as presented in the section entitled Mounting to Modular Display.
A Type 4, Type 4X, or IP 66 rating is achieved when mounted to the flat surface of a sufficiently rated enclosure. Please follow
the instructions in the section entitled Installation Steps.
Panel Thickness: 16
1
to 7 Gauge (1.6 to 5mm)
Panel Cutout Dimensions
Figure 13: Panel Cutout Dimensions
Width
Height
Display Size (in)
Width (mm)
Height (mm)
12
317
214.5
15
398
245.5
19
482
297
24
581
360
All panel cutout measurements should be within ±0.5 mm.
Values presented are width and height only.
1
For IP66 installations of 12-inch displays (IC758CSW12SCREEN-A and IC758COW12SCREENSLR-A) use a 14 to 7 gauge (2 to 5 mm) thick panel.

12 RXI Industrial Monitor Quick Start Guide GFK-3071C
Installation Steps
1. Verify that the gasket is present and properly seated in the bezel channel located on the sides of the unit. Carefully
insert the unit into the mounting panel cutout.
Figure 14: Panel Install View
2. Insert the hook of the mounting bracket into the mounting hole as displayed in the following figure.
Figure 15: Mounting Bracket Insertion
3. Tighten all mounting brackets by hand until the gasket seal contacts the mounting surface uniformly.
4. In a cross pattern around the monitor tighten all mounting clip screws to a torque 13-13.9 in-lbs (15-16kgf-cm
making sure not to overtighten the bracket.
Figure 16: Tighten Mounting Bracket

13 RXI Industrial Monitor Quick Start Guide GFK-3071C
Mounting to Modular Display
Figure 17: 12” Panel Mount
Figure 18: 15” Panel Mount

14 RXI Industrial Monitor Quick Start Guide GFK-3071C
Figure 19: 19”/24” Panel Mount
VESA Mount
The RXi Industrial Monitor can also be VESA mounted as shown in the figures below. All 7” through 24”
units include VESA mount dimensions of 100mm x 100mm. All units are fastened with four M4x8 screws.
Figure 20: 10” VESA Mount

15 RXI Industrial Monitor Quick Start Guide GFK-3071C
Figure 21: 12” VESA Mount
Figure 22: 15” VESA Mount

16 RXI Industrial Monitor Quick Start Guide GFK-3071C
Figure 23: 19”/24” VESA Mount

Technical Support & Contact Information
Home link: http://www.emerson.com/industrial-automation-controls
Knowledge Base: https://www.emerson.com/industrial-automation-controls/support
Note: If the product is purchased through an Authorized Channel Partner, please contact the seller directly for any
support.
Emerson reserves the right to modify or improve the designs or specifications of the products mentioned in this manual at
any time without notice. Emerson does not assume responsibility for the selection, use or maintenance of any product.
Responsibility for proper selection, use and maintenance of any Emerson product remains solely with the purchaser.
© 2020 Emerson. All rights reserved.
Emerson Terms and Conditions of Sale are available upon request. The Emerson logo is a trademark and service mark of
Emerson Electric Co. All other marks are the property of their respective owners.