Emerson NR38 User manual

Thank you…………
For purchasing this Emerson Heritage Series Cathedral Style AM/FM Table Radio. Just like the original cathedral style
radios of the past, the cabinet of each Emerson Heritage Series radio is made by hand using real hardwood veneers, so
that – on the outside - no two units are exactly alike. On the inside however, we have used only state of the art electronic
components to provide excellent performance and trouble free operation.
We have taken great care during the manufacturing and testing of this product. Every component in this system was in
perfect working order when it left our factory. It has been designed to provide you with many years of musical enjoyment
and trouble free operation with an absolute minimum of care and maintenance. If you encounter any problems with the
set-up or operation of this system, please do not return it to the retail store. Please call the Emerson Customer Service Hot
Line, toll free, at 800-898-9020. One of our representatives will attempt to solve the problem for you. If it is not possible to
solve the problem by phone, you will be instructed on the procedure to obtain a replacement unit.
Once again, thanks for purchasing this Emerson audio product.
The serial number of your system is located on a label on the back panel of the main unit. Please take a moment now to
record the serial number in the space provided below. You may be asked to supply this number in the unlikely event that
you need to call our Customer Service Hot Line.
Model Number: NR38
Serial Number:
PREPARATION FOR USE
UNPACKING AND SET-UP
•Carefully remove the radio from the display carton and remove all packing materials from the radio.
•Unwind and fully extend the AC power cord and the FM wire antenna located on the back panel.
•Place the main unit on a stable, level surface such as a table, shelf, or stand, out of direct sunlight, and away from
sources of excess heat, dust, vibration, moisture, and humidity.
POWER SOURCE
This system is designed to operate on normal 120V/60Hz AC house current only. Attempting to operate this system on
any other power source could cause damage to the system, and such damage is not covered by your warranty.
Note:This unit has a polarized AC plug with one wide blade and one narrow
blade. This plug will only fit into a matching polarized AC outlet. This is a safety
feature to reduce the possibility of electric shock. If this plug will not fit in yourAC
outlet, you probably have an outdated non-polarized outlet. You should have your
outdated outlet changed by a qualified, licensed electrician. Do not file the wide
blade on the plug, or use an adapter to make the plug fit into your outlet. This
defeats the safety feature and could expose you to electric shock.
PROTECT YOUR FURNITURE
This model is equipped with non-skid rubber 'feet' to prevent the product from moving when you operate the controls.
These 'feet' are made from non-migrating rubber material specially formulated to avoid leaving any marks or stains on
your furniture. However certain types of oil based furniture polishes, wood preservatives, or cleaning sprays may cause
the rubber 'feet' to soften, and leave marks or a rubber residue on the furniture. To prevent any damage to your furniture we
strongly recommend that you purchase small self-adhesive felt pads, available at hardware stores and home improvement
centers everywhere, and apply these pads to the bottom of the rubber 'feet' before you place the product on fine wooden
furniture.
Model:NR38
AM/FMRadio
Visitourweb siteatwww.emersonradio.com
AC Plug
AC Outlet
NR38_031904.p65 19/3/2004, 9:501

AM FM
TUNING
VOLUME
F
M
A
M
1
7
1
1
0
8
1
0
6
1
4
0
1
0
0
1.) AC Power Cord.
2.) FM Wire Antenna (Back Cabinet).
3.) Speaker.
4.) FM Radio Dial.
5.) AM Radio Dial.
6.) Power ON/OFF-VOLUME Control.
7.) TUNING Knob.
8.) AM/FM Band Selector.
LOCATION OF CONTROLS
1
2
3
87
4
5
6
OPERATING INSTRUCTIONS
• Extend and position the FM WireAntenna to its full length for best FM reception.
• Connect theAC power cord to your householdAC outlet.
1.)Toturnthe system‘on’,rotatethe ON/OFF-VOLUMEcontrolclockwiseuntil a‘click’isheard,the dial light
comes ‘On’. Setthe Volumetoalowlevel.
2.) Set the Band selector to the FM or AM position.
3.) Rotate the TUNING knob to tune to the desired station.
4.)Adjustthe ON/OFF-VOLUMEcontroltothe desired level.
5.)When you arefinished listening turnthe ON/OFF-VOLUMEcontrolcounterclockwiseuntil a‘click’isheard.
The dial light goes ‘Off’.
Hints For Better Reception
If FM reception is noisy or weak, try changing the position and direction of the FM wire antenna until you find the
position that provides the best reception.
If AM reception is unsatisfactory, try repositioning the main unit slightly until the internal AM bar antenna picks
up the strongest signal.
NR38_031904.p65 19/3/2004, 9:502

CARE AND MAINTENANCE
NOTE: There are no user serviceable parts in this system. Any required service must be performed only by qualified
electronics service technicians at Emerson authorized service centers.
If the cabinets become dusty they should be wiped with a soft dust cloth only. Do not use any aerosol dusting sprays or
furniture polish.
If the front panels become smudged with fingerprints they may be wiped with a soft cloth, slightly dampened with a mild
soap and water solution. Do not use any type of abrasive cleaning powders or abrasive cleaning pads, as these will
scratch the finish on your system.
CAUTION:
Disconnect the unit from the AC outlet while cleaning and never allow any water, or any other liquid, to enter the
cabinet.
FCC INFORMATION
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.
LIMITEDWARRANTY
Emerson RadioCorp.warrantsmanufacturing defectsinoriginalmaterial,including originalpartsand workmanship,under
normaluseand conditions,foraperiod ofninety(90)daysfromthedateoforiginalpurchaseintheU.S.Withyourdatedproof
ofpurchase,wewill providerepairservice atno chargeforlaborand partsatanauthorizedDepotRepairFacility,orreplace the
productinourdiscretion.If yoursystemfailstooperateproperlyduring thewarrantyperiod duetoamanufacturing defect,do
notreturnthesystemtotheretail store.Pleasecall theEmerson CustomerService Hotlinetoll free at1-800-898-9020.Wewill
diagnosetheproblemand instructyou howtohaveyoursystemrepairedorreplaced,atourdiscretion.
Thiswarrantydoesnotcoverdamagefromnegligence,misuse,abuse,accident,failuretofollowoperating instructions,
commercialuse,rental,repairsby anunauthorizedfacility,orproductspurchased,used,servicedordamagedoutsideofthe
UnitedStates.
THISWARRANTYGIVESYOU SPECIFICLEGALRIGHTS,AND YOU MAY ALSOHAVEOTHERRIGHTSWHICH
VARYFROMSTATE TOSTATE.
AU898R
NR38_031904.p65 19/3/2004, 9:503

EMERSON
PartNo.:16-2948
403-01 PrintedinChina
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN EXTENSION CORD, RECEPTACLE OR
OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. TO PREVENT
FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
IMPORTANTSAFETYINSTRUCTIONS
1.) Read these instructions.
2.) Keep these instructions.
3.) Heed all warnings.
4.) Follow all instructions.
5.) Do not use this apparatus near water.
6.) Clean only with dry cloth.
7.) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8.) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that
produce heat.
9.) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than
the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for
your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10.) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where
they exit from the apparatus.
11.) Only use attachments / accessories specified by the manufacturer.
12.) Unplug this apparatus during lightning storms or when unused for long periods of time.
13.) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such
as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has
been exposed to rain or moisture, does not operate normally, or has been dropped.
14.) This appliance shall not be exposed to dripping or splashing water and no object filled with liquids such as vases shall be placed
on the apparatus.
15.) Do not overload wall outlet. Use only power source as indicated.
16.) Use replacement parts as specified by the manufacturer.
17.) The product may be mounted to a wall only if recommended by the manufacturer.
18.) Upon completion of any service or repairs to this product, ask the service technician to perform safety checks.
!
CAUTION
RISK OFELECTRICSHOCK
DONOTOPEN
The lightning flashwitharrow-
head symbol,withinan equi-
lateraltriangleisintended to
alertthe usertothe presence
ofuninsulated‘dangerousvoltage’
withinthe product’s enclosure
thatmaybe ofsufficient
magnitude toconstitutearisk
ofelectricshock topersons.
The exclamation pointwithin
an equilateraltriangleisin-
tended toalertthe userto
the presenceofimportant
operating and maintenance
(servicing)instructionsin
the literatureaccompany-
ing the appliance.
WARNING:TOREDUCETHE
RISK OFELECTRICSHOCK
DONOTREMOVE COVER
(ORBACK),NOUSER
SERVICEABLEPARTSINSIDE
REFERSERVICINGTO
QUALIFIEDSERVICE
PERSONNEL.
CAUTION
TOFIND THELOCATIONAND PHONE
NUMBEROFYOUR NEARESTSERVICE
CENTERPERMITTEDTOPERFORM
WARRANTY...
CALL TOLL FREE:1-800-695-0098
FORCUSTOMERSERVICE,PLEASE WRITETO:
Emerson RadioCorp.
ConsumerAffairsDept.
1901 DiplomatDrive,
FarmersBranch,TX75234.
FORADDITIONALSET-UPOROPERATINGASSISTANCE
PLEASE CALL:
1-800-898-9020
NR38_031904.p65 19/3/2004, 9:594