Emerson Rosemount 3144P User manual

Reference Manual
00809-0100-4021, Rev JA
April 2017
Rosemount™3144P Temperature Transmitter
with Rosemount X-well™Technology

1
Reference Manual
00809-0100-4021, Rev JA
Contents
April 2017
Contents
1Section 1: Introduction
1.1 Using this manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
1.1.1 Transmitter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
1.2 Rosemount 3144P revisions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
1.3 Confirm HART revision capability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
2Section 2: Installation
2.1 Safety messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
2.2 Installation considerations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
2.2.1 General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
2.2.2 Electrical. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
2.2.3 Environmental. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
2.2.4 Moist or corrosive environments. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
2.2.5 Location and position. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
2.2.6 Software compatibility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
2.3 Commissioning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
2.3.1 Setting the loop to manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
2.3.2 Set the switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
2.4 Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
2.5 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
2.5.1 Typical North American installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
2.5.2 Typical European installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
2.5.3 Rosemount X-well™installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
2.5.4 In conjunction with a Rosemount 333 HART Tri-Loop™ (HART/4–20 mA only). . . . 17
2.5.5 LCD display. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
2.5.6 Multichannel installation (HART/4–20 mA only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
2.6 Wiring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
2.6.1 HART/4–20 mA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
2.6.2 Foundation Fieldbus. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
2.6.3 Sensor connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
2.7 Power supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
2.7.1 Surges/transients . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
2.7.2 Grounding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Contents

2
Reference Manual
00809-0100-4021, Rev JA
Contents
April 2017
Contents
3Section 3: HART Commissioning
3.1 Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
3.2 Confirm HART revision capability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
3.3 Safety messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
3.4 Field Communicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
3.4.1 Updating the HART communication software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
3.4.2 Device dashboard menu tree . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
3.4.3 Device dashboard Fast Key sequences . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
3.5 Review configuration data. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
3.5.1 Review . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
3.6 Check output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
3.6.1 Analog output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
3.7 Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
3.7.1 Variable mapping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
3.7.2 Sensor configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
3.7.3 Change type and connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
3.7.4 Output units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
3.7.5 Sensor 1 serial number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
3.7.6 Sensor 2 serial number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
3.7.7 2-wire RTD offset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
3.7.8 Terminal (body) temperature. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
3.7.9 Dual-sensor configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
3.8 Rosemount X-well Technology configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
3.8.1 Configure Rosemount X-well technology with a Field Communicator. . . . . . . . . . . . 88
3.9 Device output configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
3.9.1 Process variable damping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
3.9.2 Alarm and saturation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
3.9.3 HART output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
3.9.4 LCD display options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
3.10 Device information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
3.10.1 Tag. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
3.10.2 Long tag . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
3.10.3 Date. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
3.10.4 Descriptor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
3.10.5 Message . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
3.11 Measurement filtering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
3.11.1 50/60 Hz filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
3.11.2 Master reset. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94

3
Reference Manual
00809-0100-4021, Rev JA
Contents
April 2017
Contents
3.11.3 Intermittent sensor detect . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
3.11.4 Intermittent threshold. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
3.11.5 Open sensor holdoff. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
3.12 Diagnostics and service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
3.12.1 Loop test. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
3.13 Multidrop communication. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
3.14 Use with the HART Tri-Loop. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
3.15 Calibration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117
3.15.1 Calibration frequency . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117
3.16 Trim the transmitter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118
3.16.1 Sensor input trim . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119
3.16.2 Active calibrator and EMF compensation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120
3.16.3 Transmitter-sensor matching. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121
3.16.4 D/A output trim or scaled output trim . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127
3.16.5 Output trim . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127
3.16.6 Scaled output trim . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127
3.17 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128
3.17.1 Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128
3.17.2 LCD display. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132
4Section 4: Foundation Fieldbus Configuration
4.1 Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133
4.2 Safety messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133
4.3 General block information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134
4.3.1 Device description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134
4.3.2 Node address. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134
4.3.3 Modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134
4.3.4 Link Active Scheduler (LAS). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135
4.3.5 Capabilities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135
4.4 Foundation Fieldbus function blocks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136
4.4.1 Resource block (index number 1000). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136
4.4.2 Sensor Transducer Block (index number 1100) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137
4.4.3 LCD display Transducer Block (index number 1200) . . . . . . . . . . . . . . . . . . . . . . . . . . 137
4.4.4 Analog Input Block (index number 1400, 1500, 1600, and 1700) . . . . . . . . . . . . . . 137
4.4.5 PID Block (index number 1800 and 1900) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137
4.4.6 Input selector (index number 2000) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137
4.4.7 Output splitter (index number OSPL 2300) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137
4.4.8 Arithmetic (index number 2200). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137

4
Reference Manual
00809-0100-4021, Rev JA
Contents
April 2017
Contents
4.4.9 Signal characterizer (index number 2100). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137
4.5 Resource block. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 138
4.5.1 Features and Features_Sel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 138
4.5.2 Plantweb™alerts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 139
4.5.3 Recommended actions for Plantweb alerts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 142
4.5.4 Recommended actions for field diagnostics per NE107 . . . . . . . . . . . . . . . . . . . . . . . 143
4.5.5 Resource block diagnostics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143
4.6 Sensor transducer block. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 144
4.6.1 Sensor transducer block diagnostics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 145
4.7 LCD display transducer block . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 146
4.7.1 Custom meter configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 146
4.7.2 LCD display transducer block diagnostics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147
4.8 Hot Backup transducer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148
4.9 Analog Input (AI) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150
4.9.1 Simulation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150
4.9.2 Configure the AI block . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150
4.9.3 Filtering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 154
4.9.4 Process alarms. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 154
4.9.5 Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 155
4.9.6 Advanced features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 155
4.9.7 Analog input diagnostics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 156
4.10 Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 157
4.10.1 Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 157
4.10.2 Trim the transmitter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 157
4.10.3 Advanced diagnostics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 159
4.10.4 Statistical process monitoring (SPM) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 161
4.10.5 SPM configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 162
4.11 Troubleshooting guides . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 163
4.11.1 Foundation Fieldbus. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166
4.11.2 LCD display. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167
5Section 5: Operation and Maintenance
5.1 Safety messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 169
5.2 Maintenance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 169
5.2.1 Test terminal (HART®/4–20 mA only). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 170
5.2.2 Sensor checkout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 170
5.2.3 Electronics housing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 170
5.2.4 Transmitter diagnostics logging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171

5
Reference Manual
00809-0100-4021, Rev JA
Contents
April 2017
Contents
5.3 Return of materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171
6Section 6: Safety Instrumented Systems (SIS) Requirements
6.1 SIS certification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 173
6.2 Rosemount 3144P safety certified identification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 173
6.3 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 174
6.4 Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 174
6.4.1 Damping. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 174
6.4.2 Alarm and saturation levels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 174
6.5 Operation and maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 175
6.5.1 Proof test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 175
6.5.2 Partial proof test 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 175
6.5.3 Comprehensive proof test 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 176
6.5.4 Comprehensive proof test 3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 176
6.5.5 Inspection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 177
6.6 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 177
6.6.1 Failure rate data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 177
6.6.2 Failure values . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 177
6.6.3 Product life. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 177
6.7 Spare parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 177
AAppendix A: Specifications and Reference Data
A.1 HART®and Foundation™Fieldbus specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 179
A.1.1 Functional specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 179
A.1.2 Physical specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 179
A.1.3 Performance specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 180
A.2 HART/4–20 mA specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 185
A.3 Foundation Fieldbus specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 186
A.4 Dimensional drawings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 189
A.5 Ordering information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 194
A.5.1 How to order Rosemount X-well Technology . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 198
A.6 Spare parts list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 199
BAppendix B: Product Certifications
B.1 European Directive Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 203
B.2 Ordinary Location Certification. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 203
B.2.1 North America. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 203
B.2.2 Europe. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 204

6
Reference Manual
00809-0100-4021, Rev JA
Contents
April 2017
Contents
B.2.3 International . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 205
B.2.4 Brazil . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 205
B.2.5 China. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 206
B.2.6 EAC - Belarus, Kazakhstan, Russia . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 208
B.2.7 Japan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 208
B.2.8 Combinations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 208
B.2.9 Tables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 209
B.2.10 Additional certifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 209
B.3 Installation drawing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 210

7
Reference Manual
00809-0100-4021, Rev JA
Title Page
April 2017
Title Page
Rosemount™3144P Temperature
Transmitter
NOTICE
Read this manual before working with the product. For personal and system safety, and for optimum
product performance, make sure you thoroughly understand the contents before installing, using, or
maintaining this product.
Within the United States, Emerson™has two toll-free assistance numbers:
Customer Central
Technical support, quoting, and order-related questions.
1-800-999-9307 (7:00 am to 7:00 pm CST)
North American Response Center
Equipment service needs.
1-800-654-7768 (24 hours)
International
(952)-906-8888
The products described in this document are NOT designed for nuclear-qualified applications. Using
non-nuclear qualified products in applications that require nuclear-qualified hardware or products may
cause inaccurate readings.
For information on Rosemount nuclear-qualified products, contact your local Emerson Sales
Representative.

8
Reference Manual
00809-0100-4021, Rev JA
Title Page
April 2017
Title Page

Reference Manual
00809-0100-4021, Rev JA
Introduction
April 2017
1
Introduction
Section 1 Introduction
1.1 Using this manual
The sections in this manual provide information on installing, operating, and maintaining the
Rosemount™3144P Temperature Transmitter. The sections are organized as follows:
Section 2: Installation contains mechanical and electrical installation instructions.
Section 3: HART Commissioning contains techniques for properly commissioning the device.
Section 4: Foundation Fieldbus Configuration provides instruction on commissioning and operating
Rosemount 3144P Transmitter. Information on software functions, configuration parameters, and
online variables is also included.
Section 5: Operation and Maintenance contains operation and maintenance techniques.
Section 6: Safety Instrumented Systems (SIS) Requirements provides identification, installation,
configuration, operation and maintenance, and inspection information for Safety Instrumented
Systems.
Appendix A: Specifications and Reference Data supplies reference and specification data, as well as
ordering information.
Appendix B: Product Certifications contains approval information.
1.1.1 Transmitter
Industry-leading temperature transmitter delivers unmatched field reliability and innovative process
measurement solutions:
Rosemount X-well™Technology provides a Complete Point Solution™for accurately measuring process
temperature in monitoring applications without the requirement of a thermowell or process
penetration
Superior accuracy and stability
Dual and single sensor capability with universal sensor inputs (RTD, T/C, mV, ohms)
Comprehensive sensor and process diagnostics offering
IEC 61508 safety certification
Dual-compartment housing
Large LCD display
Selectable HART®Revision (5 and 7) or FOUNDATION™Fieldbus protocols
Improve efficiency with best-in-class product specifications and capabilities:
Reduce maintenance and improve performance with industry leading accuracy and stability
Improve measurement accuracy by 75 percent with Transmitter-Sensor Matching
Ensure process health with system alerts and easy to use Device Dashboards
Easily check device status and values on local LCD display with large percent range graph
Achieve high reliability and installation ease with the industry's most rugged dual compartment design

2
Reference Manual
00809-0100-4021, Rev JA
Introduction
April 2017
Introduction
Optimize measurement reliability with diagnostics designed for any protocol on any host system.
Thermocouple Degradation Diagnostic monitors the health of a thermocouple loop, enabling
preventative maintenance
Minimum and Maximum Temperature Tracking tracks and records temperature extremes of the
process sensors and the ambient environment
Sensor Drift Alert detects sensor drift and alerts the user
The Hot Backup™feature provides temperature measurement redundancy
Refer to the following literature for a full range of compatible connection heads, sensors, and
thermowells provided by Emerson™:
Rosemount Volume 1 Temperature Sensors and Accessories Product Data Sheet,
Rosemount DIN-Style Temperature Sensors and Thermowells (Metric) Product Data Sheet,
1.2 Rosemount 3144P revisions
HART Protocol
The initial release of the Rosemount 3144P HART was device revision 3. Each additional revision contains
incremental improvements. Table 1-1 summarizes these changes.
Table 1-1. HART Revisions
Software
release
date
Identify device Field device driver Review instructions
NAMUR
software
revision
NAMUR
hardware
revision
HART
software
revision(1)
1. NAMUR Software Revision is located in the hardware tag of the device. HART Software Revision can be read using a HART capable
configuration tool.
HART
universal
revision(2)
2. Device Driver file names use Device and DD Revision, e.g. 10_07. HART Protocol is designed to enable legacy driver revisions to continue to
communicate with new HART devices. To access this functionality, the new device driver must be downloaded. It is recommended to
download the new device driver to ensure new functionality.
Device
revision
Manual document
number
April-2017 1.2.1 1.0.0 37 7(3)
3. Rosemount X-well sensor type.
00809-0100-4021
5 5(4)
April-2012 1.1.1 N/A 27 6(4)
4. HART Revision 5 and 7 Selectable, thermocouple degradation diagnostic, min/max tracking.
5 5(4)
Feb-2007 N/A N/A 1 5 4
Dec-2003 N/A N/A N/A 5 3

3
Reference Manual
00809-0100-4021, Rev JA
Introduction
April 2017
Introduction
FOUNDATION Fieldbus
The following table summarizes the Rosemount 3144P FOUNDATION Fieldbus revision history.
Table 1-2. FOUNDATION Fieldbus Revisions
Device
revision
Software
revision
Hardware
revision
NAMUR
software
revision
NAMUR
hardware
revision
Description Date
Rev 1 1.00.011 5N/A N/A Initial release Mar. 2004
Rev 1 1.00.024 5N/A N/A Minor product maintenance, software Sep. 2004
Rev 1 1.00.024 6N/A N/A Minor product maintenance, hardware Dec. 2004
Rev 1 1.01.004 6N/A N/A Software update Oct. 2005
Rev 1 1.01.010 7N/A N/A Component obsolescence hardware change and
software to support the hardware change. Feb. 2007
Rev 2 2.02.003 7N/A N/A FF Sensor and Process Diagnostic Release (D01): Thermocouple Degradation Diagnostic and
Minimum and Maximum Temperature Tracking Nov. 2008

4
Reference Manual
00809-0100-4021, Rev JA
Introduction
April 2017
Introduction
Rev 3 3.10.23 71.3.1 1.0.0
Device Compliance to ITK 6.0.1. Addition of
NE107 device diagnostic information. Ease of use
improvements including:
Hot Backup functionality has been moved to
the transducer block, allowing easier
configuration from the DD
Device is shipped with the simulate switch
ON, allowing device alerts simulation without
cover removal
Device has unique block names using the last
four digits (XXXX) of the output board serial
number, e.g. AI_1400_XXXX
All blocks are instantiated before shipping,
including model option code dependent
blocks. The product also has all parameters
initialized so that its primary measurement is
available with no user changes required.
All devices ship will AI block scheduled.
Customer will be able to use old DD files when
replacing a device with a newer rev device -
This is possible for devices with device
revision number 3 and above.
Wherever possible, the product ships with
parameters initialized to common values. The
product shall ship with no uninitialized
parameters that will keep the transmitter
from providing its primary measurement
right out of the box.
The product's default block tags are be less
than or equal to 16 characters in length.
Custom function blocks were replaced with
enhanced function blocks.
Default block tags include underscores, “_”,
instead of white spaces.
The CF file has a better description of the
device, including meaningful defaults and
example values.
Device provides means to properly range
graphs and charts in the device dashboards.
June 2013
Table 1-2. FOUNDATION Fieldbus Revisions
Device
revision
Software
revision
Hardware
revision
NAMUR
software
revision
NAMUR
hardware
revision
Description Date

5
Reference Manual
00809-0100-4021, Rev JA
Introduction
April 2017
Introduction
1.3 Confirm HART revision capability
If using HART based control or asset management systems, confirm the HART capability of those
systems prior to transmitter installation. Not all systems are capable of communicating with HART
Revision 7 Protocol. This transmitter can be configured for either HART Revision 5 or Revision 7.
Switch HART revision mode
If the HART configuration tool is not capable of communicating with HART Revision 7, the Rosemount
3144P will load a Generic Menu with limited capability. The following procedures will switch the HART
revision mode from the Generic Menu.
1. Select Manual Setup>Device Information>Identification>Message.
a. To change to HART Revision 5, Enter “HART5” in the Message field.
b. To change to HART Revision 7, Enter “HART7” in the Message field.

6
Reference Manual
00809-0100-4021, Rev JA
Introduction
April 2017
Introduction

7
Reference Manual
00809-0100-4021, Rev JA
Installation
April 2017
Installation
Section 2 Installation
Safety messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 7
Electrical . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 8
Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 13
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 14
Wiring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 20
Power supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 24
2.1 Safety messages
Instructions and procedures in this section may require special precautions to ensure the safety of the
personnel performing the operations. Information that potentially raises safety issues is indicated by a
warning symbol ( ). Refer to the following safety messages before performing an operation preceded
by this symbol.
s
Explosions could result in death or serious injury.
Do not remove the transmitter cover in explosive atmospheres when the circuit is live.
Before connecting a Field Communicator in an explosive atmosphere, make sure the instruments in
the loop are installed in accordance with intrinsically safe or non-incendive field wiring practices.
Verify that the operating atmosphere of the transmitter is consistent with the appropriate hazardous
locations certifications.
Both transmitter covers must be fully engaged to meet explosion-proof requirements.
Failure to follow these installation guidelines could result in death or serious injury.
Make sure only qualified personnel perform the installation.
Process leaks could result in death or serious injury.
Install and tighten thermowells or sensors before applying pressure, or process leakage may result.
Do not remove the thermowell while in operation. Removing while in operation may cause process
fluid leaks.
Electrical shock could cause death or serious injury.
If the sensor is installed in a high-voltage environment and a fault or installation error occurs, high
voltage may be present on the transmitter leads and terminals.
Use extreme caution when making contact with the leads and terminals.

8
Reference Manual
00809-0100-4021, Rev JA
Installation
April 2017
Installation
2.2 Installation considerations
2.2.1 General
Electrical temperature sensors, such as resistance temperature detectors (RTDs) and thermocouples
(T/Cs), produce low-level signals proportional to temperature. The Rosemount™3144P Temperature
Transmitter converts low-level signals to HART®or FOUNDATION™Fieldbus and then transmits the signals
to the control system via two power/signal wires.
2.2.2 Electrical
Proper electrical installation is essential to prevent errors due to sensor lead resistance and electrical
noise. For HART communications, the current loop must have between 250 and 1100 ohms resistance.
Refer to Figure 2-13 on page 22 for sensor and current loop connections. FOUNDATION Fieldbus devices
must have proper termination and power conditioning for reliable operation. Shielded cables must be
used for FOUNDATION Fieldbus and may only be grounded in one place.
2.2.3 Environmental
Temperature effects
The transmitter will operate within specifications for ambient temperatures between –40 and 185 °F
(–40 and 85 °C). Since heat from the process is transferred from the thermowell to the transmitter
housing, if the expected process temperature is near or beyond specification limits, consider using
additional thermowell lagging, an extension nipple, or a remote mounting configuration to isolate the
transmitter from the process. Figure 2-1 details the relationship between housing temperature rise and
extension length.
Figure 2-1. Transmitter Housing Temperature Rise versus Extension Length for a Test Installation
(1,500 °F)
temperature
Oven
(1,000 °F)
temperature
Oven
(482 °F)
temperature
Oven
Housing Temperature
Rise Above
Ambient °C (°F)
60 (108)
50 (90)
40 (72)
0
30 (54)
20 (36)
10 (18)
3456
789
Extension length (in.)
815 °C
250 °C
540 °C
22
3.6

9
Reference Manual
00809-0100-4021, Rev JA
Installation
April 2017
Installation
Example
The maximum permissible housing temperature rise (T) can be calculated by subtracting the maximum
ambient temperature (A) from the transmitter’s ambient temperature specification limit (S). For
instance, if A = 40 °C.
T = S – A
T = 85 °C – 40 °C
T = 45 °C
For a process temperature of 540 °C (1004 °F), an extension length of 3.6-in (91.4 mm) yields a housing
temperature rise (R) of 22 °C (72 °F), providing a safety margin of 23 °C (73 °F). A 6.0-in.(152.4 mm)
extension length (R = 10 °C [50 °F]) offers a higher safety margin (35 °C [95 °F]) and reduces
temperature-effect errors but would probably require extra transmitter support. Gauge the
requirements for individual applications along this scale. If a thermowell with lagging is used, the
extension length may be reduced by the length of the lagging.
2.2.4 Moist or corrosive environments
The Rosemount 3144P Transmitter has a highly reliable dual compartment housing designed to resist
moisture and corrosion. The sealed electronics module is mounted in a compartment that is isolated
from the terminal side with conduit entries. O-ring seals protect the interior when the covers are
properly installed. In humid environments, however, it is possible for moisture to accumulate in conduit
lines and drain into the housing.
Note
Each transmitter is marked with a tag indicating the approvals. Install the transmitter according to all
applicable installation codes, and approval and installation drawings (see Appendix B: Product
Certifications). Verify that the operating atmosphere of the transmitter is consistent with the hazardous
locations certifications. Once a device labeled with multiple approval types is installed, it should not be
reinstalled using any of the other labeled approval types. To ensure this, the approval label should be
permanently marked to distinguish the approval type(s) used.
2.2.5 Location and position
When choosing an installation location and position, take access to the transmitter into account.
Terminal side of electronics housing
Mount the transmitter so the terminal side is accessible, allowing adequate clearance for cover removal.
Best practice is to mount the transmitter with the conduit entries in a vertical position to allow for
moisture drainage.
Circuit side of electronics housing
Mount the transmitter so the circuit side is accessible, providing adequate clearance for cover removal.
Additional room is required for LCD display installation. The transmitter may be mounted directly to or
remotely from the sensor. Using optional mounting brackets, the transmitter may be mounted to a flat
surface or a 2.0-in. (50.8 mm) diameter pipe (see “Mounting” on page 13).

10
Reference Manual
00809-0100-4021, Rev JA
Installation
April 2017
Installation
2.2.6 Software compatibility
Replacement transmitters may contain revised software that is not fully compatible with the existing
software. The latest device descriptors (DD) are available with new Field Communicators or they can be
loaded into existing communicators at any Emerson Service Center or via the Easy Upgrade process. For
more information on upgrading a Field Communicator, see Section 3: HART Commissioning.
To download new device drivers, visit Emerson.com/Rosemount/Device-Install-Kits.
2.3 Commissioning
The Rosemount 3144P Transmitter must be configured for certain basic variables to operate. In many
cases, these variables are pre-configured at the factory. Configuration may be required if the variables
need to be changed.
Commissioning consists of testing the transmitter and verifying transmitter configuration data.
transmitters can be commissioned either before or after installation. Commissioning the transmitter on
the bench before installation using a Field Communicator or AMS Device Manager ensures that all
transmitter components are in working order.
For more information on using the Field Communicator with the transmitter, see Section 3: HART
Commissioning. For more information on using the Rosemount 3144 with FOUNDATION Fieldbus, see
Section 4: Foundation Fieldbus Configuration.
Figure 2-2. Installation Flowchart
2.3.1 Setting the loop to manual
Set the process application loop to manual when sending or requesting data that would disrupt the loop
or change the output of the transmitter. The Field Communicator or AMS Device Manager will prompt to
set the loop to manual, when necessary. Acknowledging the prompt does not set the loop to manual, it
is only a reminder. Setting the loop to manual is a separate operation.
No
Yes
No
Yes
Bench
Calibration?
BASIC SETUP
Refer to Section
5: Operation and
Maintenance
Set Units
Set Range
Values - HART
Set Sensor Types
Set Number of
Wires
VERIFY
Simulate Sensor
Input
FIELD INSTALL
Set Jumpers or
Switches
Mount the
Transmitter
Power the
Transmitter
Check for Process
Leaks
Wire the
Transmitter
START HERE
Done
Within
Specifications?
Set Damping