Enabling Devices 7511M User manual

For Technical Support:
Call our Technical Service Department
Monday through Friday, 9 a.m. to 5 p.m. (EST)
1-800-TEC-TOYS or 1-800-832-8697
[email protected]
Mountable Magical Light Show - #7511M
USER’S GUIDE
50 Broadway
Hawthorne, NY 10532
Tel. [phone] / Fax [phone]
Toll Free 800.832.8697
www.enablingdevices.com

Our Most Popular Toys Now Available On Mounts!
For the child who needs special visual placement, we’ve selected four
of our most popular adapted toys and created a system that allows you
to easily mount them on a wheelchair, tabletop, bedrail or tray.
Purchase any of the four mountable toys with or without the mounting
arm or purchase all four toys with one mount. Size: 3 ½ "W x 10"D.
Requires 6 AA Batteries.
1. The Mountable Magical Light Show requires 6 AA batteries (Not
included). Alkaline batteries are recommended because they last
longer. Do not use rechargeable batteries because they supply
lower voltage and the unit may not perform as well.
2. The battery compartments are located on the back of the unit. To
remove the battery compartment covers, unscrew the small Phillips
Head screws, and slide the covers off. Install new batteries, being
careful to observe proper (+) & (-) battery polarity. Replace cover
and screw.
3. Activate this toy by connecting any capability switch to the unit
via the 1/8" jack, located on the side of the unit. If you need to use
a ¼ " to 1/8"adapter for your switch, it must be a mono adapter, not
stereo.
4. Make sure that the connections between the external capability
switch and the adapter (if applicable) and the jack on the Mini
Popper are tight. There should be no gaps.
5. Begin play by activating the external capability switch. The 6"
spinning art show has 36 different colored patterns. As the colored
lights change against a black background you hear upbeat music.
6. The Magical Light Show will continue playing while the external
capability switch continues to be activated. Once you release, all
activity will stop.
Troubleshooting:
Problem: The Magical Light Show does not work.
Action #1: Check or replace the 6 AA batteries with fresh new
batteries.
Action #2: Try a different switch that you know works with other
toys/devices to rule out the Magical Light Show as the source of the
problem.
Care of Unit:
The Magical Light Show can be wiped clean with any household
multi-purpose cleaner and disinfectant.
Do not submerge the unit, as it will damage the contents and the
electrical components.
Do not use abrasive cleaners, as they will scratch the surface of the
unit.
Rev 7/18/11