ENACFIRE Future User manual

ENACFIRE
TRUE WIRELESS
STEREO HEADPHONES
ENACFIRE Future INSTRUCTION

Contents
English
Deutsch
Espafiol
Italiano
01-15
16-31
32-47
48-63

Start 1
Packing list
A
Earphones x1 Charging case x1
OO s Q
OOw
oo
Eartips x3 USB Charging ~ Earphones Manual/Warranty
Cable x1 Bag x1 Card x2

Product overview
1. Charging port
2. Charging case LED light (white light)
3. Earphones LED light
4. Multifunction button
5. Talking mic
6. Acoustic hole
7.URlogo
8. Magnetic charging contact pins

Wear
Step 1: Remove the insulating film.
nsutr i —
Os
Ow
O
Step 3: wearitinthe ear and adjust to a comfortable position
(please note the left and right earphones).
DA

Power On
Mode 1
Take out earphones from charging case and earphones will power on
automatically. At this time, blue LED is on for 1 second.
First of all, earphone is OFF, and press the multifunction button for
about 2 seconds. Meanwhile, biue LED is on for 1 second.

Pairing 5
Mobile phones and earphones
Mode1: Take out L/R earphones from charging case. The two earphones
will automatically pair each other. Then L earphone will automatically enter
nto the palring status when blue and white lights flash alternately. Select
and click "ENACFIRE Future® from the Bluetooth list of the mobile phone.
Mode2: If charging case is not around, follow POWER ON MODE 2's
method of operation, the two earphones will actively pair each other.
Note: Left earphone is the master earphone.

Connection lost
Mode 1: Device Bluetooth Function off
If bluetooth function of mobile phone is turned off, earphones
will be disconnected. After § minutes of reconnection timeout,
the earphone will power off automatically.
Mode 2: Out of connection distance
If the connection between the phone and the earphones exceeds
the effective range, the earphone will power off automatically
after 5 minutes of reconnection timeout,

Incoming call
Answer a call/End a call
Press multifunction button of L earphone once.
(S 4 I
15} 1o} ©
Rejectacall
Press multifunction button of L earphone twice
a Short press ied
9 ©
Note : Only the Left earphone can hear the voice In Stereo Mode.
‘The LR earphone could make phone calls normally in Mono Mode.

Music
8
Pause
Press the multifunction button once to pause music in the music mode .
(Some phones may require you to start a media player first) .
Play
Press the multifunction button once to play in the music mode
(Some phones may require you to start a media player first) .
> n
®

Track forward
Double-press the multifunction button of the R earphone to skip track forward
in the music mode.
Note: This function Is not supported when L/R headphones are used alone.
Track backward
Double-press the multifunction button of the L earphone to skip track
backward in the music mode.
Note: This function Is not supported when L/R headphones are used alone.
<«
)

Mono and stereo use
Mono use
®Take out one of the earphones from the charging case. Press the
multifunction button for 4 seconds until the light of earphone changes white.
The earphone is OFF.
@Press and hold the multifunction button for 4 seconds untilthe blue and
‘white lights flash alternately.
®Turn on the mobile phone bluetooth list, select and click "ENACFIRE
Future®, and complete the mono use.
e g o )
Stereo use
@.Put the L/R earphones into the charging case.
@Take out L/R earphones from the charging case. The two earphones will
automatically pair each other.
®Turn on the mobile phone bluetooth I
Future’, and complete the stereo use.
, select and click "ENACFIRE

PowerOff
——
1
Mode 1
Put the earphones into the charging case and it will shutdown automatically
and the white LED lights up.
Note:Put the left earphone Into the charging bax separately, the right
earphone will automatically enter the pairing state;
Putthe right earphone back Into the charging box separately, and the left
earphone can be used normally.
Mode 2
When earphone is ON, press and hold the mutifunction button for 4
seconds. The white LED light will be on for 1 second.

Charging
2
Earphone
charging
Put the earphones into the charging case.
Charging: LED stays on white.
Full charge: The light is off.
‘g
LED status when the charging case charges
the earphones
@.The first light flashes when charging case is charging L earphone;
@aThe third light flashes when charging case Is charging R earphone;
(®When charging case is charging L earphone and R earphone
simultaneously , the first and third lights flash simultaneously; .
@®When battery is full, lights of charging case is on for 5 seconds. .

Charging case charging
LED status when the charging case is being charged
When the power is below 30%, the first LED light
flashes;
When the power is 30%~70%, the first LED light is
always on, and the second light flashes;
When the power is more than 70%, the first 2 lights
are always on, and the 3rd light flashes;
When the power is 100%, 3 lights are always on.
LED status of charging case in normal use.
When the power is below 10%, the first LED light flashes;
When the power s 10%~30%, the first LED lightis on;
When the power is 30%~70%, the first 2 LED lights are on;
When the power is 70%~100%, 3 LED lights are always on.
<30%
30%-70%
>70%
100%
<0%
10%~30%
30%~70%
70%~100%

Safety Instruction
Using earphone at high to moderate volumes for extended periods of
time willresultin permanent hearing damage. It is advised you keep
volume levels moderate to low at all times for your safety.
Do not use while driving a car, cycling, operating machinery or
performing other activities that require hearing surrounding sounds.
Do not use earphone in thunderstorm weather, the earphone may not
‘work properly in the condition, and increase the risk of being hit by
lightning.
Earphone may not work properly under high temperature or high
humidity conditions.
Do not use any corrosive cleaner/oll to clean the earphone. If the
earphone comes in contact with liquids, quickly wipe away. If submersed
in water, do not turn the earphone on until completely dried.
Tips: liquid submersion voids the warranty.
Keep the earphone and packaging out of reach of children .

Q&A 15
Q: Why my earphones can not charged?
A: You need to be removed the protective film from the charging part of
each earbud before the first use.
Q:Why the music cuts in and out sometimes?
A: Please make sure there is no obstacle between Enacfire earbuds and
your mobile phone.
Please make sure there is no Microwave oven / wifi transmitter arround
you, which are more likely to produce electromagnetic interference and
resultin signal interruption
Note: Please keep your phone and the master earphone (L) as close as
possible, ensure more stable bluetooth connection.
Q: How to contact ENACFIRE After-sale Team?
A:If you have any issue with the product, please contact us via
supportaenacireglobal.com(US/ CA) / [email protected](UK).
We will eply to your email within 24 hours and 100% solve your issue.