ENACFIRE G20 User manual

ENACFIRE -G20
TRUEWIRELESS
STEREOHEADPHONES

ENACFIRE
TRUE WIRELESS
STEREO HEADPHONES
ENACFIRE G20INSTRUCTION

Customer Supprot
supporteenacfireglobal.com (US/CA)
moonguaenaciireglobal.com (UK)
Tel: [phone]
We wil reply o you within 24 hours and 100% solve your ssues
Packaging List
7
Earphones x1 Charging Case xt
£ Y
Eartips USBCharging Manual Warranty Card
3 Cable xt x B

Product Overview
1. Charging port
2 Charging case LED light
3. Multfunctional button
4. Earphone LED
5. Earphone Mic
6. Acoustc hole
7.L/R Logo
8 Magneti Charing Pin
9.Speaker

Power On & Pairing
‘Approach 1-With Charging Case
Power On: Take out the earphones from the charging case
with Blue light on
Pairing: Earphones will start pairing automatically with
Right earphone Blue and White light flash alternately
‘Connection: Select ENACFIRE 620 from the device's
Bluetooth st
Note: Right earphone Is the master sarphone
7%

Power On & Pairing
Approach 2 - Earphones Standalone
Power On: Touch the mulifunctional buttons for 1 second.
Release when you hear the prompt sound "Power or' with Biue
light on
Pairing: Earphones will tart paifing automatically with Right
‘carphone Blue and White light lash alternately
Connection: Select'ENACFIRE G20 from the device's
Bluetooth ist
Note: Right earphone is the master earphone

Incoming call
‘Answer call/End call
Tap the LeftRight multfunctional button once
O P
Reject call
Touchthe Left/Right multifunctional button for 2 seconds
a Touch 672588

Music
Pause/Play
Tap the Left/Right mulifunctional button once to
pause/play music n the music mode.
(Some phones may require to start a media player frst)
Volce Assistant
Tolaunch your Device’s Volce Assistant, tap the Left/Right
multifunctional button 3 times with the ‘Beep’ prompt
sound
> n
“ 9=

Next
Double-tap the Right multifunctional button
Previous song
Double-tap the Left multfunctional button
Adjust Volume
Touch and hold the Left multfunctional button to decrease
volume
Touch and hold the Right mufunctional button to increase
volume
Note:
/Above functions are not supported when the earphone Is used
nsingle.
"Prompt sound ‘Beep’ will produced when the volume reach
mimum or meximum evel
7\ -« » (@
© ®
2

Power Off
Mode1
Put the earphones back to the charging case, they will power
off automaticaly
Note: Put only the Left earphone Into the charging case, the
Right earphone wil stay connected.
Putonly the Right carphone Into the charging case, the Lot
‘earphone wil disconnected and start pairing.
Mode 2
Earphones Standalone
Tum off Bluetooth to disconnect the earphones.
Touch either one multfunctional button for 8 seconds to power
off earphones.
ul °
2

Single Mode
Single
Rioht Earpnones Lot Earpnone
Mode e "
Turn of Bluetooth to disconnect the earphones.
Touch LeftRgh button for 8 seconds 1o power
Step1 | off corprones
Touch the Rightbutton | Toueh the Letbutton for
forseconds with | 4 seconds with Blue and
Blue and White ight | Whitelight lash
fash sltemately atemately
Step2 | Releasewnenyou | Release whenyou hear
hear promptsound | prompt sound Paiing
Paiing’
Select ENACFIRE G20 from the Buetooth st
Step3
Note: There il be two ‘ENACFIRE G20 Bluetooth names for
Left and Right cerphones. Plaosa select accordingly.
2

Charging
Earphones charging Status.
Leftmost LED light flashing: Left earphone is charging
Rightmost LED light flashing: Right earphone is charging
LED lights off: Fuly charged
Note: It takes about 15 hours o fully charge the earphones.
Charging case charging Status
Lights on charging case stands fo the remaining battery
capacity
Note: It takes about 15 - 2 hours o fully charge the charging
case
a Battery Left.
218 Battry Lett
4 Battery Lett
Fully charged
2

Note
Please follow below steps when both sarphones falto pair
‘each other or occur connection related lssues.
1. Place both earphones to charging case and remain charging
2. Touch and hold the power buttons of both earphones for 85
un Blue and White lights flash
3. Take out both earphones from charging case
4. Delete the ‘ENACFIRE G20' Bluetooth name from your phone
and turn off Bluetooth
5. Turn on Bluetooth and click ENACFIRE G20 from your
phone
26

Safety Instruction
Using earphones at high to moderate volumes for extended
periods o time wil resultin permanent hearing damage. Itis
advised that you keep volume levels moderate to low at all
times for your safety.
Do not use while driving, cycling, operating machinery or
performing other activiies that require hearing surrounding
sounds.
Do not use earphones in thunderstorm weather, the earphones.
may ot work properly in the bad weather condiion, and may.
increase the risk of being hit by lightning.
Earphanes may not work property under high temperature or
high huridity conditions.
Do not use any corrosive cleanerioil o clean the earphones . If
the earphones come in contact with iauids, quickly wipe away.
If submersed i the water, do not tun the earphones on unti it
is completely cried.
Tips: Warranty void f the arphones submersion in the water
Keep the earphones and the packaging out of each of
ehidren,
25