ENACFIRE Future Plus User manual

ENACFIRE
TRUE WIRELESS
STEREO HEADPHONES
ENACFIRE Future Plus INSTRUCTION

Contents
® English 01-14
® BAEE 15-29
© Deutsch 30-45
® Espafiol 46-60
@ ltaliano 61-75
® Francgais 76-90

Start
Packaging list
A
Earphones x1 Charging case x1
o0 s
OOm .
OO
Eartips x3 USB Charging ~ Earphones Manual/Warranty
Cable x1 Bag x1 Card x2

Product overview
1. Charging port
2.USB port
3. Charging case LED light (white ight)
4. Earphones LED light
5. Mulifunction button .
6. Talking mic
7. Acoustic hole
8 URIogo
9. Magnetic charging contact pins

Wearing
Step 1: choose the suitable eartips.
Step 2: wearitinthe ear and adjust to a comfortable position
(please note the left and right earphones).
) M
SRR

Power On
Mode 1
Take out the earphones from the charging case and they will power on
automatically. At this time, the blue LED is on for 1 second
Mode 2
Please make sure the earphone has been turn off, press and hold the.
multifunction button for 2 seconds. Then release when you hear the
prompt sound 'Power on', the blue LED light will lash for 1 second at
the same time. .

Pairing
5
Mobile
phones
and
earphones
Mode1:
Take
out
L/R
earphones
from
the
charging
case.
The
two.
earphones
will
automatically
pair
each
other.
Then
L
earphone
will
automatically
enter
into
the
palring
status
when
biue
and
white
lights
flash
alternately.
Select
and
click
"Future
Plus
from
the
Bluetooth
lst
of
the
mobile
phone.
Mode2: Ifthe charging case is not around, follow POWER ON MODE 2 's
method of operation, the two earphones will be activated and pair each
other.
Note: Left earphone is the master earphone.

Connection lost
Mode 1: Device Bluetooth Function off
If the Bluetooth function of mobile phone is turned off, earphones
will be disconnected. After 5 minutes of reconnection timeout,
the earphone will power off automatically.
Mode 2: Out of connection distance
If the connection between the phone and the earphones exceeds
the effective range, the earphone will power off automatically
after 5 minutes of reconnection timeout.

Incoming call
Answer a call/End a call
Press multifunction button of L earphone once.
AN / :5 ‘Short press oncel
= ) ©
Rejectacall
Press multifunction button of L earphone twice
a ot pres wied
) ©
Note: When recelving a call
Only the Left earphone can her the voice In Stereo Mode.
‘The LIR earphone could hear the voice In Mono Mode.

Music
8
Pause
Press the multifunction button once to pause music in the music mode
(Some phones may require you to start a media player first) .
Play
Press the multifunction button once to play in the music mode
(Some phones may require you to start a media player first) .
> n

Next song
Double-press the multfunction button of the R earphone to play the next
song in the music mode.
Note: This function Is not supported when LIR headphones are used alone.
Previous song
Double-press the multfunction button of the L earphone to play the
previous song in the music mode.
Note: This function Is not supported when LIR headphones are used alone.
Ve

Mono and stereomode———————— ©
Mono mode
(D Take out one of the earphones from the charging case. Press the
multfunction button for 4 seconds until the light of earphone changes white.
The earphone is OFF.
2 Press and hold the multifunction button for 4 seconds unti the bive and
‘white lights flash alternately.
Tum on the mobile phone bluetooth list, select and click "Future Plus", and
complete the mono mode.
2o o )
Stereo mode
D Put the LIR earphones into the charging case.
© Take out LIR earphones from the charging case. The two earphones will
automatically pair each other.
Tum on the mobile phone Bluetooth list, select and click "Future Plus",
and complete the stereo mode.

PowerOff ——— 1
Mode 1
Put the earphones into the charging case and it will shutdown automatically
and the white LED lights up.
Note: Put the left earphone Into the charging box separately, the right
‘earphone will automatically enter the pairing status;
Putthe right earphone back Into the charging box separately, and the left
‘earphone can be used nomally.
RN
Mode 2
When the earphone is ON, press and hold the multifunction button for 4
seconds. The white LED light will be on for 1 second.

Charging
——————
@
Earphone
charging
Put the
earphones
into
the
charging
case.
Charging:
LED
stays
on
white.
Fully charged: The LED light is off.
Tips: It takes about 15 hours to fully charge the earphones.
Charging case charging
LED status when the charging case is being charged
When the battery is 113 charged, one LED light s on.
When the battery is 2/3 charged, two LED lights are on.
When the battery is fully charged, all three lights are on.
Please charge the charging case when the first LED light is flashing
(low battery).
. "
° o 23
® o o Fulychages

Safety
Instruction
————————————
Using earphone at high to moderate volumes for extended periods of
time will resultin permanent hearing damage. It is advised you keep
volume levels moderate to low at all times for your safety.
Do not use while driving a car, cycling, operating machinery or
performing other activities that require hearing surrounding sounds.
Do not use earphone in thunderstorm weather, the earphone may not
‘work properly in the bad weather condition, and may increase the risk of
being hit by lightning,
Earphone may not work properly under high temperature or high
humidity condiions.
Do not use any corrosive cleaner/oll to clean the earphone. If the.
earphone comes in contact with liquids, quickly wipe away. If submersed
in the water, do not turn the earphone on until it is completely dried.
Tips: Warranty void If the earphones submersion In the water
Keep the earphones and the packaging out of reach of children.

Q&A %
@: Why the charging case is unable to be used to charge my mobile
phone when the first LED light Is still on?
A:It needs greater amont of battery power to charge the mobile phone
a5 compared to the earbuds. When the first LED light of charging case
flashes, it indicates the battery is running out but still sufficent to charge
the earbuds.
@ : Why the music cuts In and out sometimes?
A: Please make sure there is no obstacle between Enacfire earbuds and
your mobile phone.
Please make sure there is no Microwave oven / wifi transmitter around
you, which are more likely to produce electromagnetic interference and
resultin signal interruption.
Note: Please keep your phone and the master earphone (L) as close as
possible, ensure more stable biuetooth connection.
Q: How to contact ENACFIRE Customer Service Team?
A:1f you have any issue with the product, please contact us via
support@enacfireglobal com (US/ CA) / moonguenacfireglobal.com
(UK). We will reply to you within 24 hours and 100% solve your issue.