ENACFIRE F1 User manual

ENACFIRE
TRUE WIRELESS
STEREO EARPHONES
ENACFIRE F1INSTRUCTION

Contents
® English 01-16
o BAFFE 17-31
© Deutsch 32-48
@ Espafiol 49-65
@ Francais 66-82

Packing List
&%
Earphones x1 Charging case x1
66 s @
2 O [ &6 .
Eartips x3 USB Charging Manual 1 Warranty Card x1
Cable x1

Product Overview
1. Charging port
USB Output
Charging case LED light
Multfunctional bution
2
3
4
5. Earphone LED light and Mic
6. Acoustic hole.
7.L/R Logo
8 Magnetic Charging Pin
9. Speaker

Wearing
Step 1: choose the suitable eartips
o s o "
=X [*® e
[} N
Step 2 wearitand adjust to a comfortable position
(Please distinguish between the left and right earphone)

Power On & Pairing
Approach 1- With Charging Case
Power On: Take outthe earphones from the charging case with Blue
light on
Pairing: Earphones will start paring automatically with Blue and White
light flash alternatively
Connection: Select 'ENACFIRE F1' from the device's Bluetooth list
Note: Left earphone is the master earphone.
&=

Power On & Pairing
Approach 2 - Earphones Standalone
Power On: Touch the multifunctional buttons for 2 seconds. Release when you
hear the prompt sound 'Power on' with Blue light on
Pairing: Earphones will start paring automatically with Blue and White light
flash alternatively
Connection: Select 'ENACFIRE F1' from the device's Bluetooth list
Note: Left earphone i the master earphone
touch 2sec

Disconnection
Reason 1: Device's Bluetooth Function
Turned O
Ifthe Bluetooth is turned off, earphones will be disconnected.
After 5 minutes of reconnection timeout, the earphones will
power off automatically.
Reason 2: Out of Connection Distance
i the connection distance between the device and the
earphones exceeds the effective range, the earphone will power
off automatically after 5 minutes of reconnection timeout.
5 mlrbtes @

Incoming call
Answer call/End call
Tap the multifunctional button of either earphone once.
b = G
LR
Reject call
Touch the Left or Right multifunctional button for 2 seconds
|
) Toueh for 2588 ‘
LR

Music
Pause/ Play
Double-tap the Right multifunctional button to pause/play music
inthe music mode
(Some phones may require you to start a media player first)
Voice Assistant
To launch your Device's Voice Assistant, double-tap the Left
multifunctional button with the 'Beep’ prompt sound.
> 1 )

Next song
Touch the Right multifunctional button for 2 seconds
Touch the Left multifunctional button for 2 seconds
Note: This function is not supported when earphone Is used In single

Single Mode
Single
Mode
Method 1
Left Earphone
(Master Earphone)
Simply take Left earphone
out from the charging case
Right Earphone
1.Put back Left earphone
only when both earphones.
are connected
2.Right earphone will start
paring with blue and
white lights flash
alterately
3. Select another ENACFIRE
F from the Bluetooth list
Method 2
Touch the Left
multifunctional button for 2
seconds with Blue and
White light flashes
alternately
1. Touch the Right
multifunctional button for
4 seconds with Blue and
White light flash
alternately
2. Select another ‘ENACFIRE
F" from the Bluetooth list.
Note: Make sure earphones are tumed off before using Method 2

Power Off
Mode 1
Put the earphones back to the charging case, they will power off
automatically.
Note: Put only the Left earphone into the charging case, the Right
earphone will disconnected and start pairing
Put only the Right earphone Into the charging case, the Left earphone will
stay connected
Mode 2
Earphones Standalone
When the earphones are ON, touch either one multifunctional button for
6 seconds, both earphones will power off.
Ry
Toucn 658
LR

Charging
Earphones charging Status
Earphones LED light on: Charging
Earphones LED light off: Fully charged
Note: It takes about 1.5 hours to fully charge the earphones
Charging case charging Status
Lights on charging case stand for the remaining battery capacity
Note: It takes about 3 hours to fully charge the charging case.
° 3 Bateery Left
o0 273 Battery Left
® ® @ ruychaged

Safety Instruction
Using earphones at high to moderate volumes for extended periods of
time will result in permanent hearing damage. It s advised that you keep
volume levels moderate to low at all times for your safety.
Do ot use while driving, cycling, operating machinery or performing
other activities that require hearing surrounding sounds.
Do ot use earphones in thunderstorm weather, the earphones may not
work properly in the bad weather condition, and may increase the risk of
being hit by lightning
Earphones may not work properly under high temperature or high
humidity conditions.
Do not use any corrosive cleaner/oll to clean the earphones . If the
earphones come in contact with liquids, quickly wipe away. If submersed
in the water, do not turn the earphones on until it is completely dried.

Q&A
Q: Why the music cuts In and out sometimes?
A: Please make sure there is no obstacle between the earphones and
your device. Please make sure there is no Microwave oven / Wifi
transmitter around you, which are more likely to produce electromagnetic
interference and result in signal interruption.
Note: Please keep your phone and the master earphone (L) as close as
possible, ensure more stable Bluetooth connection.
Q: What should | do If there are connectivity and palring Issues?
A: Please make sure both earphones have been tured off and try to
forget all the devices' name in your mobile phone's Bluetooth list, then
reconnect the earphones to the mobile phone.
Q: How to contact ENACFIRE Customer Service Team?
A:1f you have any issue with the product, please contact us via
[email protected] (US/ CA) / [email protected]
(UK). We willreply to you within 24 hours and 100% solve your issue.

FCC Statement
This equipment has been tested and found to comply with the fimits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful
interference in a residentialinstallation,
This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may
cause harmiul interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. Ifthis equipment does cause harmiul interference
to radio or television reception, which can be determined by turing the
equipment off and on, the user is encouraged to ty to correct the
interference by one or more of the following measures:
—Reorient of relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions:
(1) This device may not cause harmful interference
(2) this device must accept any interference received, including
interference that may cause undesired operation
Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate the.
equipment.