Enclume Classic Decor DR1 KD Series User manual

Enclume Classic Décor Oval Rack
DR1 KD
Enclume Décor racks are the ultimate in
quality, design, strength and function.
Congratulations for owning one of the finest
storage racks made.
WARNING:
READ ALL OF THE INSTRUCTIONS
BEFORE ASSEMBLING AND USING YOUR RACK.
Enclosed you will find everything needed for the assembly and use of your pot rack. Two people make assembly and
installation easier. The parts and hardware included are
Components included:
1 - Hammered Steel Oval
1 - Cross Bar
4 - Curved Brackets
1 - Grid
Hardware included:
2 - Ceiling Screw Hooks
2 - Chain approx. 6"
2 - 'S' Hooks 2"
12 - Pot Hooks
4 - Grid Brackets - EGB
1 - 1/8" Hex Key
2 - #10 x 3/8" Button Head Screws
2 - #10 x 5/8" Button Head Screws
Toggle Kit
ASSEMBLY AND INSTALLATION INSTRUCTIONS
1) Lay rack body (oval) on firm surface. Protect surface with corrugated box if necessary.
2) Using two #10 x 3/8" button head screws, attach cross bar to both ends of the oval. (The cross bar will fit to the outside of
the rack body). Do not fully tighten screws at this time.
3) The curved brackets are pre-assembled as a set, each set will have one curved bracket with a "tapped" (threaded hole)
and one with a drilled (no threads). Remove the #10 x 5/8" button head from one set. Slipping each curved bracket (end
with the tight "U" shape bend) onto the rack body one on each side of the rack, using the #10 x 5/8 button head screw,
attach the two curved brackets and the cross bar together. (Please use the hole closest to the end of the cross bar, the
larger of the two holes must be used to hang fixture).
4) Repeat process for other set of curved brackets. Securely tighten all screws at this time.
5) Your rack can be carefully anchored into solid wood of the ceiling joist or beams. Carefully measure the area where the
rack is to be hung and install the ceiling screw hooks (approximately 14" apart). If you are mounting in plasterboard, use
the Toggle provided and follow the directions in the Toggle kit.
6) Place the four grid brackets over the sides of the rack on the inside of each of the four curved brackets with the straight
end of the brackets facing towards the inside of the rack. Next place the grid on top of the grid brackets. (See note next
page).
Ver 05.05.03

7) Insert the "S" hooks into each of the remaining holes in the cross bar and the other end through one end of the chain.
Carefully lift your rack into place and attach the other end of the chain onto the ceiling screw hooks.
8) Hang your heavier item on the straight portion of the rack body or the center of the grid area.
9) All of our hammered steel racks are finished with an industrial wax designed to give years of protection to the rack.
Cleaning is done easily with a damp cloth. Dry thoroughly after cleaning. If a touch up is ever needed we recommend a
"Pledge" like wax product.
Note: Grid as shown in drawings is upside down for illustration purposes. Please turn grid over so crossbars that extend the
width of the grid are facing down. This will help to keep grid from sliding out of position when rack is in use.
Ver 05.05.03
jury.
It is important that your rack is assembled correctly. If the unit is assembled or
used incorrectly, it could become unstable and collapse, possibly causing in
WARNING
Limited Warranty: This product is warranted to be free of material defects for a period of five years from the date of purchase. Customer's exclusive remedy shall
be the repair or replacement of the defective product and shall be subject to the following conditions: (1) notice of any defect is received by Enclume within the
warranty period and (2) customer returns the defective product to Enclume Design Products, Inc. , 24 Colwell St.. , Port Hadlock, WA 98339, postage prepaid
within 20 days following a return authorization number (which may be obtained by telephoning the number at the bottom of this instructions) being provided to the
customer by Enclume. There are no other warranties, expressed or implied. THERE ARE NO WARRANTIES OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE. ENCLUME SPECIFICALLY DISCLAIMS ANY AND ALL INCIDENTAL OR CONSEQUENTIAL DAMAGES
ARISING OUT OF THE PURCHASE OR USE OF ENCLUME'S PRODUCTS.