Endress+Hauser Proline Promag H 200 Technical specifications

Brief Operating Instructions
Proline Promag H 200
Electromagnetic flow measuring system
These Instructions are Brief Operating Instructions; they do not replace the
Operating Instructions included in the scope of supply.
For detailed information, refer to the Operating Instructions and other
documentation on the CD-ROM provided or visit "www.endress.com/
deviceviewer".
KA01120D/06/EN/01.12
71185893

Table of contents Proline Promag H 200
2 Endress+Hauser
Table of contents
1 Document information ...................................... 3
1.1 Symbols used ................................................ 3
2 Basic safety instructions ...................................... 5
2.1 Requirements for the personnel ....................................... 5
2.2 Designated use ............................................... 5
2.3 Workplace safety .............................................. 6
2.4 Operational safety .............................................. 6
2.5 Product safety ................................................ 6
3 Product description ......................................... 7
3.1 Product design ............................................... 7
4 Incoming acceptance and product identification ..................... 8
4.1 Incoming acceptance ............................................ 8
4.2 Product identification ............................................ 9
5 Storage and transport ...................................... 12
5.1 Storage conditions ............................................. 12
5.2 Transporting the product .......................................... 13
6 Installation .............................................. 14
6.1 Installation conditions ........................................... 14
6.2 Mounting the measuring device ...................................... 18
6.3 Post-installation check ........................................... 23
7 Electrical connection ....................................... 25
7.1 Connection conditions ........................................... 25
7.2 Connecting the measuring device ...................................... 27
7.3 Ensuring the degree of protection ...................................... 31
7.4 Post-connection check ........................................... 32
8 Operation options ......................................... 33
8.1 Structure and function of the operating menu ................................ 33
8.2 Access to the operating menu via the local display .............................. 34
8.3 Access to the operating menu via the operating tool ............................. 40
9 System integration ........................................ 41
10 Commissioning ........................................... 41
10.1 Function check .............................................. 41
10.2 Switching on the measuring device ..................................... 41
10.3 Setting the operating language ....................................... 42
10.4 Configuring the measuring device ..................................... 42
10.5 Defining the tag name ........................................... 43
10.6 Protecting settings from unauthorized access ................................ 43
11 Diagnostic information ...................................... 45

Proline Promag H 200 Document information
Endress+Hauser 3
1 Document information
1.1 Symbols used
1.1.1 Safety symbols
Symbol Meaning
DANGER
A0011189-EN
DANGER!
This symbol alerts you to a dangerous situation. Failure to avoid this situation will result in serious
or fatal injury.
WARNING
A0011190-EN
WARNING!
This symbol alerts you to a dangerous situation. Failure to avoid this situation can result in serious
or fatal injury.
CAUTION
A0011191-EN
CAUTION!
This symbol alerts you to a dangerous situation. Failure to avoid this situation can result in minor
or medium injury.
NOTICE
A0011192-EN
NOTICE!
This symbol contains information on procedures and other facts which do not result in personal
injury.
1.1.2 Electrical symbols
Symbol Meaning
A0011197
Direct current
A terminal to which DC voltage is applied or through which direct current flows.
A0011198
Alternating current
A terminal to which alternating voltage is applied or through which alternating current flows.
A0017381
Direct current and alternating current
• A terminal to which alternating voltage or DC voltage is applied.
• A terminal through which alternating current or direct current flows.
A0011200
Ground connection
A grounded terminal which, as far as the operator is concerned, is grounded via a grounding system.
A0011199
Protective ground connection
A terminal which must be connected to ground prior to establishing any other connections.
A0011201
Equipotential connection
A connection that has to be connected to the plant grounding system: This may be a potential equalization
line or a star grounding system depending on national or company codes of practice.
1.1.3 Tool symbols
Symbol Meaning
A0011220
Flat blade screwdriver

Document information Proline Promag H 200
4 Endress+Hauser
A0011221
Allen key
A0011222
Open-ended wrench
1.1.4 Symbols for certain types of information
Symbol Meaning
A0011182
Allowed
Indicates procedures, processes or actions that are allowed.
A0011183
Preferred
Indicates procedures, processes or actions that are preferred.
A0011184
Forbidden
Indicates procedures, processes or actions that are forbidden.
A0011193
Tip
Indicates additional information.
A0011194
Reference to documentation
Refers to the corresponding device documentation.
A0011195
Reference to page
Refers to the corresponding page number.
A0011196
Reference to graphic
Refers to the corresponding graphic number and page number.
,… ,
Series of steps
ÃResult of a sequence of actions
1.1.5 Symbols in graphics
Symbol Meaning
1, 2, 3,... Item numbers
,… ,
Series of steps
A, B, C, ... Views
A-A, B-B, C-C, ... Sections
A0013441
Flow direction

Proline Promag H 200 Basic safety instructions
Endress+Hauser 5
Symbol Meaning
-
A0011187
Hazardous area
Indicates a hazardous area.
.
A0011188
Safe area (non-hazardous area)
Indicates a non-hazardous area.
2 Basic safety instructions
2.1 Requirements for the personnel
The personnel must fulfill the following requirements for its tasks:
►Trained, qualified specialists must have a relevant qualification for this specific function and
task
►Are authorized by the plant owner/operator
►Are familiar with federal/national regulations
►Before beginning work, the specialist staff must have read and understood the instructions in
the Operating Instructions and supplementary documentation as well as in the certificates
(depending on the application)
►Following instructions and basic conditions
2.2 Designated use
Application and media
The measuring device described in these Instructions is intended only for flow measurement of
liquids with a minimum conductivity of 20 mS/cm.
Depending on the version ordered, the measuring device can also measure potentially explosive,
flammable, poisonous and oxidizing media.
Measuring devices for use in hazardous areas, in hygienic applications or in applications where
there is an increased risk due to process pressure, are labeled accordingly on the nameplate.
To ensure that the measuring device remains in proper condition for the operation time:
►Only use the measuring device in full compliance with the data on the nameplate and the
general conditions listed in the Operating Instructions and supplementary documentation.
►Based on the nameplate, check whether the ordered device is permitted for the intended use
in the hazardous area (e.g. explosion protection, pressure vessel safety).
►Use the measuring device only for media against which the process-wetted materials are
adequately resistant.
►If the measuring device is not operated at atmospheric temperature, compliance with the
relevant basic conditions specified in the device documentation provided (on the CD-ROM)
is absolutely essential.
Incorrect use
Non-designated use can compromise safety. The manufacturer is not liable for damage caused
by improper or non-designated use.

Basic safety instructions Proline Promag H 200
6 Endress+Hauser
!WARNING
Danger of breakage of the sensor due to corrosive or abrasive fluids!
►Verify the compatibility of the process fluid with the sensor material.
►Ensure the resistance of all fluid-wetted materials in the process.
►Observe the specified maximum process pressure.
Verification for borderline cases:
►For special fluids and fluids for cleaning, Endress+Hauser is glad to provide assistance in
verifying the corrosion resistance of fluid-wetted materials, but does not accept any warranty
or liability as minute changes in the temperature, concentration or level of contamination in
the process can alter the corrosion resistance properties.
Residual risks
The external surface temperature of the housing can increase by max. 10 K due to the power
consumption of the electronic components. Hot process fluids passing through the measuring
device will further increase the surface temperature of the housing. The surface of the sensor,
in particular, can reach temperatures which are close to the fluid temperature.
Possible burn hazard due to fluid temperatures!
►For elevated fluid temperature, ensure protection against contact to prevent burns.
2.3 Workplace safety
For work on and with the device:
►Wear the required personal protective equipment according to federal/national regulations.
For welding work on the piping:
►Do not ground the welding unit via the measuring device.
2.4 Operational safety
Risk of injury.
►Operate the device in proper technical condition and fail-safe condition only.
►The operator is responsible for interference-free operation of the device.
2.5 Product safety
This measuring device is designed in accordance with good engineering practice to meet state-
of-the-art safety requirements, has been tested, and left the factory in a condition in which they
are safe to operate.
It meets general safety standards and legal requirements. It also complies with the EC directives
listed in the device-specific EC Declaration of Conformity. Endress+Hauser confirms this by
affixing the CE mark to the device.

Proline Promag H 200 Product description
Endress+Hauser 7
3 Product description
3.1 Product design
1 2 345 6 78
9
+E
–
A0014056
å 1 Important components of a measuring device
1Electronics compartment cover
2 Display module
3 Main electronics module
4 Cable glands
5 Transmitter housing
6 I/O electronics module
7 Terminals (spring loaded terminals, pluggable)
8 Connection compartment cover
9 Sensor

Incoming acceptance and product identification Proline Promag H 200
8 Endress+Hauser
4 Incoming acceptance and product identification
4.1 Incoming acceptance
A0015502
1
+
2
1
+
2
A0013843
A0013695
A0015502
A0013698
A0015502
A0013699

Proline Promag H 200 Incoming acceptance and product identification
Endress+Hauser 9
A0015502
A0013697
If one of the conditions is not satisfied, contact your Endress+Hauser Sales Center.
4.2 Product identification
The following options are available for identification of the measuring device:
• Nameplate specifications
• Order code with breakdown of the device features on the delivery note
•Enter serial numbers from nameplates in W@M Device Viewer
(www.endress.com/deviceviewer): All information about the measuring device is displayed.
For an overview of the scope of the Technical Documentation provided, refer to the following:
The W@M Device Viewer: Enter the serial number from the nameplate
(www.endress.com/deviceviewer)

Incoming acceptance and product identification Proline Promag H 200
10 Endress+Hauser
4.2.1 Transmitter nameplate
Order code:
Ext. ord. cd.:
Ser. no.:
Date:
i
i
Patents
322540-0001
1
2
345
6
7
8
9
10 11 12
14
15
16
17
13
A0013906
å 2 Example of a transmitter nameplate
1 Manufacturing location
2 Name of the transmitter
3 Order code
4 Serial number
5 Extended order code
6 Electrical connection data, e.g. available inputs and outputs, supply voltage
7 Type of cable glands
8 Permitted ambient temperature range (Ta)
9 Firmware version (FW) and device revision (Dev.Rev.) from the factory
10 CE mark, C-Tick
11 Additional information on version: certificates, approvals
12 Permitted temperature range for cable
13 Manufacturing date: year-month
14 Degree of protection
15 Explosion protection approval information
16 Document number of safety-related supplementary documentation
17 2-D matrix code

Proline Promag H 200 Incoming acceptance and product identification
Endress+Hauser 11
4.2.2 Sensor nameplate
i
Patents
i
Material:
Tm:
Ext. ord. cd.:
Order Code:
Ser.No.:
Date:
21
3
4
5
6 7
8
9
10
11
13 12
14
15
A0017186
å 3 Example of sensor nameplate
1Name of the sensor
2 Manufacturing location
3 Order code
4 Serial number (Ser. no.)
5 Extended order code (Ext. ord. cd.)
6 Nominal diameter of the sensor
7 Test pressure of the sensor
8 Medium temperature range
9 Material of lining and electrodes
10 Degree of protection: e.g. IP, NEMA
11 Permitted ambient temperature (Ta)
12 2-D matrix code
13 CE mark, C-Tick
14 Flow direction
15 Manufacturing date: year-month

Storage and transport Proline Promag H 200
12 Endress+Hauser
Order code
The measuring device is reordered using the order code.
Extended order code
• The device type (product root) and basic specifications (mandatory features) are always
listed.
• Of the optional specifications (optional features), only the safety and approval-related
specifications are listed (e.g. LA). If other optional specifications are also ordered, these
are indicated collectively using the # placeholder symbol (e.g. #LA#).
• If the ordered optional specifications do not include any safety and approval-related
specifications, they are indicated by the + placeholder symbol (e.g. XXXXXX-ABCDE+).
4.2.3 Symbols on measuring device
Symbol Meaning
#
WARNING!
This symbol alerts you to a dangerous situation. Failure to avoid this situation can result in serious or fatal
injury.
A0011194
Reference to documentation
Refers to the corresponding device documentation.
A0011199
Protective ground connection
A terminal which must be connected to ground prior to establishing any other connections.
5 Storage and transport
5.1 Storage conditions
Observe the following notes for storage:
• Store in original packaging.
• Do not remove protective covers or protective caps installed on process connections.
• Protect from direct sunlight.
• Select a storage location where moisture cannot collect in the measuring device.
• Store in a dry and dust-free place.
• Do not store outdoors.
•Storage temperature(® ä 14)

Proline Promag H 200 Storage and transport
Endress+Hauser 13
5.2 Transporting the product
!WARNING
Center of gravity of the measuring device is higher than the suspension points of the
webbing slings.
Risk of injury if the measuring device slips.
►Secure the measuring device from rotating or slipping.
►Observe the weight specified on the packaging (stick-on label).
►Observe the transport instructions on the stick-on label on the electronics compartment cover.
A0015606
Observe the following notes during transport:
• Transport the measuring device to the measuring point in the original packaging.
• Do not remove protective covers or protective caps installed on process connections. They
prevent mechanical damage to the sealing surfaces and contamination in the measuring tube.
A0015604
A0015605

Installation Proline Promag H 200
14 Endress+Hauser
6 Installation
6.1 Installation conditions
No special measures such as supports are necessary. External forces are absorbed by the
construction of the device.
6.1.1 Mounting position
Mounting location
h = ³ 2 × DN
h
A0017061
Installation in down pipes
Install a siphon or a vent valve downstream of the sensor in down pipes whose length
h ³ 5 m (16.4 ft). This precaution is to avoid low pressure and the consequent risk of damage
to the measuring tube. This measure also prevents the system losing prime, which could cause
air pockets.
h
2
1
A0017064
å 4 Installation in a down pipe
1Vent valve
2 Pipe siphon
h Length of down pipe

Proline Promag H 200 Installation
Endress+Hauser 15
Installation in partially filled pipes
A partially filled pipe with a gradient necessitates a drain-type configuration. The empty pipe
detection (EPD) function offers additional protection by detecting empty or partially filled pipes.
• Do not install the sensor at the lowest point in the drain: risk of solids accumulating.
• It is advisable to install a cleaning valve.
³5 × DN ³2 × DN
A0017063
Orientation
The direction of the arrow on the sensor nameplate helps you to install the sensor according to
the flow direction.
An optimum orientation position helps avoid gas and air accumulations and deposits in the
measuring tube.
Vertical
This is the optimum orientation for self-emptying piping systems and for use in conjunction with
empty pipe detection.
A0015591
Horizontal
The measuring electrode plane must be horizontal. This prevents brief insulation of the two
measuring electrodes by entrained air bubbles.
With horizontal orientation, empty pipe detection only works if the transmitter housing is
pointing upwards as otherwise there is no guarantee that the empty pipe detection function
will actually respond to a partially filled or empty measuring tube.

Installation Proline Promag H 200
16 Endress+Hauser
A
A
1
2
3
2
A0016260
å 5 Horizontal orientation
1 EPD electrode for empty pipe detection
2 Measuring electrodes for signal detection
3 Reference electrode for potential equalization
Inlet and outlet runs
5 × DN³³2 × DN
A0016275
For the dimensions and installation lengths of the device, see the "Technical Information"
document, "Mechanical construction" section
6.1.2 Requirements from environment and process
Ambient temperature range
Transmitter –40 to +60 °C (–40 to +140 °F)
Local display –20 to +60 °C (–4 to +140 °F), the readability of the display may be impaired
at temperatures outside the temperature range.

Proline Promag H 200 Installation
Endress+Hauser 17
Sensor –40 to +60 °C (–40 to +140 °F)
Liner Do not exceed or fall below the permitted temperature range of the liner.
If operating outdoors:
• Install the measuring device in a shady location.
• Avoid direct sunlight, particularly in warm climatic regions.
• Avoid direct exposure to weather conditions.
System pressure
Furthermore, install pulse dampers if reciprocating, diaphragm or peristaltic pumps are used.
A0015594
Vibrations
L
A0016266
å 6 Measures to prevent vibration of the device
L> 10 m (33 ft)

Installation Proline Promag H 200
18 Endress+Hauser
Adapters
100
10
0.5
d / D
[mbar]
0.6 0.7 0.8 0.9
1 m/s
2 m/s
3 m/s
4 m/s
5 m/s
6 m/s
7 m/s
8 m/s
1
D
d
max. 8°
A0016359
6.1.3 Special mounting instructions
Weather protection cover
►To ensure that the optional weather protection cover can be easily opened, maintain the
following minimum head clearance: 350 mm (13.8 in)
6.2 Mounting the measuring device
6.2.1 Required tools
For transmitter
• For turning the transmitter housing: Open-ended wrench8 mm
• For opening the securing clamps: Allen key3 mm
For sensor
For flanges and other process connections:
• Screws, nuts, seals etc. are not included in the scope of supply and must be provided by the
customer.
• Appropriate mounting tools

Proline Promag H 200 Installation
Endress+Hauser 19
6.2.2 Preparing the measuring device
1. Remove all remaining transport packaging.
2. Remove any protective covers or protective caps present from the sensor.
3. Remove stick-on label on the electronics compartment cover.
6.2.3 Mounting the sensor
!WARNING
Danger due to improper process sealing!
►Ensure that the inside diameters of the gaskets are greater than or equal to that of the process
connections and piping.
►Ensure that the gaskets are clean and undamaged.
►Install the gaskets correctly.
1. Ensure that the direction of the arrow on the sensor matches the flow direction of the
medium.
2. To ensure compliance with device specifications, install the measuring device between the
pipe flanges in a way that it is centered in the measurement section.
3. Install the measuring device or turn the transmitter housing so that the cable entries do
not point upwards.
Ã
A0013964
The sensor is supplied to order, with or without pre-installed process connections. Pre-installed
process connections are secured to the sensor with 4 or 6 hex-head threaded fasteners.
The sensor might require support or additional attachments, depending on the application
and the length of the piping run. When plastic process connections are used, the sensor
must be additionally supported mechanically. A wall-mounting kit can be ordered
separately from Endress+Hauser as an accessory .

Installation Proline Promag H 200
20 Endress+Hauser
A
B
DN 2…25
(1/12…1 )"
A0018782
å 7 Seals process connections
A Process connections with O-ring seal
B Process connections with aseptic gasket seal
Welding the sensor into the piping (weld nipples)
!WARNING
Risk of destroying the measuring electronics!
►Make sure that the welding machine is not grounded via the sensor or the transmitter.
1. Tack-weld the sensor into the pipe. A suitable welding jig can be ordered separately as an
accessory .
2. Loosen the screws on the process connection flange and remove the sensor, complete with
the seal, from the pipe.
3. Weld the process connection to the pipe.
4. Reinstall the sensor in the pipe. Make sure that everything is clean and that the seal is
correctly seated.
• If thin-walled foodstuffs pipes are not welded correctly, the heat could damage the
installed seal. It is therefore advisable to remove the sensor and the seal prior to welding.
• The pipe has to be spread approximately 8 mm (0.31 in) to permit disassembly.
Cleaning with pigs
If pigs are used for cleaning, it is essential to take the inside diameters of the measuring tube and
process connection into account. All the dimensions and lengths of the sensor and transmitter
are provided in the separate documentation "Technical Documentation".
Mounting the seals
!CAUTION
An electrically conductive layer could form on the inside of the measuring tube!
Risk of measuring signal short circuit.
►Do not use electrically conductive sealing compounds such as graphite.