Endress+Hauser Proline Prosonic Flow93C Application guide

BA00090D/06/EN/13.10
71121242
Valid as of version:
PROFIBUS DP: V 3.06.XX (device software)
PROFIBUS PA: V 3.06.XX (device software)
Description of Device Functions
Proline Prosonic Flow 93C
PROFIBUS DP/PA
Ultrasonic flow measuring system
8
0000 0001 0002 0003 0004 0005000
AAAA
1000 1001 1002 1003 1004 1005100
BAAB
2000 2001 2002 2003 2004 2005200
CAAC
3000 3001 3002 3003 3004 3005300
DAAD
4000 4001 4002 4003 4004 4005400
EAAE
5000 5001 5002 5003 5004500
FAAF
4200
5200
4201
5201
4202
5202
4203
5203
4204 4205420
520
2400 2401 2402 2403 2404 2405240
CCA
2200 2201 2202 2203 2204 2205220
CBA
0200 0201 0202 0203 0204 0205020
0000 0001 0002 0003 0004 0005000
AAAA
1000 1001 1002 1003 1004 1005100
BAAB
2000 2001 2002 2003 2004 2005200
CAAC
3000 3001 3002 3003 3004 3005300
DAAD
4000 4001 4002 4003 4004 4005400
EAAE
5000 5001 5002 5003 5004500
FAAF
4200
5200
4201
5201
4202
5202
4203
5203
4204 4205420
520
2400 2401 2402 2403 2404 2405240
CCA
2200 2201 2202 2203 2204 2205220
CBA
0200 0201 0202 0203 0204 0205020
0000 0001 0002 0003 0004 0005000
AAAA
1000 1001 1002 1003 1004 1005100
BAAB
2000 2001 2002 2003 2004 2005200
CAAC
3000 3001 3002 3003 3004 3005300
DAAD
4000 4001 4002 4003 4004 4005400
EAAE
5000 5001 5002 5003 5004500
FAAF
4200
5200
4201
5201
4202
5202
4203
5203
4204 4205420
520
2400 2401 2402 2403 2404 2405240
CCA
2200 2201 2202 2203 2204 2205220
CBA
0200 0201 0202 0203 0204 0205020

Device functions Proline Prosonic Flow 93C PROFIBUS DP/PA
2Endress+Hauser

Device functions Proline Prosonic Flow 93C PROFIBUS DP/PA Contents
Endress+Hauser 3
Contents
1 Using this Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
1.1 Using the table of contents to locate a function description . . . . . . . . . . . . . . . . . . . . . . . 5
1.2 Using the graphic of the function matrix to locate a function description . . . . . . . . . . . . 5
1.3 Using the index of the function matrix to locate a function description . . . . . . . . . . . . . . 5
2 Function matrix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
2.1 General layout of the function matrix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
2.1.1 Blocks (A, B, C, etc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
2.1.2 Groups (AAA, AEA, CAA, etc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
2.1.3 Function groups (000, 020, 060, etc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
2.1.4 Functions (0000, 0001, 0002, etc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
2.1.5 Codes identifying cells . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
2.2 Illustration of the function descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
2.3 Max. number of writes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
2.4 Display lines on the local display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
2.5 Available Blocks, Groups, etc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
2.6 Function matrix Prosonic Flow 93C PROFIBUS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
3 Block MEASURED VARIABLES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
3.1 Group MEASURING VALUES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
3.1.1 Function group MAIN VALUES CH1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
3.1.2 Function group MAIN VALUES CH2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
3.1.3 Function group CALCULATED MAIN VALUES . . . . . . . . . . . . . . . . . . . . . . . . 12
3.2 Group SYSTEM UNITS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
3.2.1 Function group CONFIGURATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
3.2.2 Function group ADDITIONAL CONFIGURATION . . . . . . . . . . . . . . . . . . . . . 15
4 Block QUICK-SETUP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
4.1 Quick Setup "Commissioning" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
5 Block USER INTERFACE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
5.1 Group CONTROL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
5.1.1 Function group BASIC CONFIGURATION . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
5.1.2 Function group UN-/LOCKING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
5.1.3 Function group OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
5.2 Group MAIN LINE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
5.2.1 Function group CONFIGURATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
5.2.2 Function group MULTIPLEX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
5.3 Group ADDITION LINE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
5.3.1 Function group CONFIGURATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
5.3.2 Function group MULTIPLEX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
5.4 Group INFORMATION LINE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
5.4.1 Function group CONFIGURATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
5.4.2 Function group MULTIPLEX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
6 Block OUTPUTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
6.1 Group CURRENT OUTPUT 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
6.1.1 Function group CONFIGURATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
6.1.2 Function group OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
6.1.3 Function group INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
6.2 Group PULSE/FREQUENCY OUTPUT 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
6.2.1 Function group CONFIGURATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
6.2.2 Function group OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
6.2.3 Function group INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72

Contents Device functions Proline Prosonic Flow 93C PROFIBUS DP/PA
4Endress+Hauser
6.3 Group RELAY OUTPUT (1 to 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
6.3.1 Function group CONFIGURATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
6.3.2 Function group OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
6.3.3 Function group INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
6.3.4 Response of the relay output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
6.3.5 Switching action of the relay output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
7 Block INPUTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
7.1 Group STATUS INPUT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
7.1.1 Function group CONFIGURATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
7.1.2 Function group OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
7.1.3 Function group INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
8 Block BASIC FUNCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
8.1 Group PROFIBUS DP / PROFIBUS PA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
8.1.1 Function group CONFIGURATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
8.1.2 Function group FUNCTION BLOCKS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
8.1.3 Function group TOTALIZER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
8.1.4 Function group OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
8.1.5 Function group INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
8.2 Group PROCESS PARAMETER (CH1 to CH2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
8.2.1 Function group CONFIGURATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
8.2.2 Function group ADJUSTMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
8.2.3 Function group LIQUID DATA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
8.3 Group SYSTEM PARAMETER (CH1 to CH2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
8.3.1 Function group CONFIGURATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
8.4 Group SENSOR DATA (CH1 to CH2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
8.4.1 Function group CONFIGURATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
8.4.2 Function group MEASURING TUBE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104
8.4.3 Function group SENSOR PARAMETER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105
8.4.4 Function group CALIBRATION DATA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
8.4.5 Function group ORIG. FACT. CALIBR. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
9 Block SUPERVISION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109
9.1 Group SYSTEM (SYSTEM CH2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110
9.1.1 Function group CONFIGURATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110
9.1.2 Function group OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111
9.2 Group VERSION INFO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113
9.2.1 Function group DEVICE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113
9.2.2 Function group SENSOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113
9.2.3 Function group AMPLIFIER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113
9.2.4 Function group F-CHIP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114
9.2.5 Function group I/O MODULE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114
10 Factory settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115
10.1 SI units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115
10.1.1 Low flow cutoff, totalizer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115
10.1.2 Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115
10.1.3 Length, temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116
10.2 US units (for USA and Canada only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116
10.2.1 Low flow cutoff, totalizer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116
10.2.2 Language, length, temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116
11 Index function matrix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117
12 Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121

Device functions Proline Prosonic Flow 93C PROFIBUS DP/PA 1 Using this Manual
Endress+Hauser 5
1 Using this Manual
There are various ways of locating the description of a function of your choice in the manual:
1.1 Using the table of contents to locate a function
description
The designations of all the cells in the function matrix are listed in the table of contents. You can
use these unambiguous designations (such as USER INTERFACE, INPUTS, OUTPUTS, etc.) to
choose whichever functions are applicable to a particular set of conditions. The page references
show you exactly where to find the detailed descriptions of the functions in question.
The table of contents is on Page 3.
1.2 Using the graphic of the function matrix to locate a
function description
This step-by-step, top-down approach starts with the blocks, the highest level, and works down
through the matrix to the description of the function you need:
1. All blocks available, and their related groups, are illustrated on Page 6. Select the block (or the
group within the block) which you need for your application and use the page reference to
locate the information corresponding to the next level.
2. The page in question contains a graphic showing of the block with all its subordinate groups,
function groups and functions. Select the function which you need for your application and use
the page reference to locate the detailed function description.
1.3 Using the index of the function matrix to locate a
function description
Each "cell" in the function matrix (blocks, groups, function groups, functions) has a unique identifier
in the form of a code consisting of one or three letters or a three- or four-digit number. The code
identifying a selected "cell" appears at the top right on the local display.
Example:
A0001653-en
The function-matrix index lists the codes for all the available "cells" in alphabetic and consecutive
order, complete with the page references for the corresponding functions.
The index to the function matrix is on Page 117.

2 Function matrix Device functions Proline Prosonic Flow 93C PROFIBUS DP/PA
6Endress+Hauser
2 Function matrix
2.1 General layout of the function matrix
The function matrix consists of four levels:
Blocks -> Groups -> Function groups -> Functions
A0000961
2.1.1 Blocks (A, B, C, etc.)
The blocks are the "highest-level grouping" of the operation options for the device.
Examples of blocks available are MEASURED VARIABLES, QUICK SETUP, USER INTERFACE,
TOTALIZERS, etc.
2.1.2 Groups (AAA, AEA, CAA, etc.)
A block consists of one or more groups. Each group represents a more detailed selection of the
operation options in the higher-order block. The groups in the “USER INTERFACE” block, for
example, include: CONTROL, MAIN LINE, ADDITION LINE, etc.
2.1.3 Function groups (000, 020, 060, etc.)
A group consists of one or more function groups. Each function group represents a more detailed
selection of the operation options in the higher-order group. The function groups in the
“CONTROL” group, for example, include: BASIC CONFIGURATION, UN-/LOCKING,
OPERATION, etc.
2.1.4 Functions (0000, 0001, 0002, etc.)
Each function group consists of one or more functions. The functions are used to operate and
parameterize the device. Numerical values can be entered or parameters selected and saved.
The functions in the "BASIC CONFIGURATION" function group include LANGUAGE, DISPLAY
DAMPING, CONTRAST LCD, etc. The procedure for changing the language of the user interface,
for example, is as follows:
1. Select the block "USER INTERFACE".
2. Select the group "CONTROL".
3. Select the function group "BASIC CONFIGURATION".
4. Select the function "LANGUAGE" (here you can set the language required).
…
…
…
…
…
…
…
…
0001
2001
0401
2021
2201
0002
2002
0402
2022
2202
0003
2003
0403
2023
2203
0009
2009
0409
2029
2209
0429
2049
2069
0421
2041
0422
2042
0423
2043
20632061 2062
0000
2000
0400
2020
2200
0420
2040
2060
000
200
040
202
220
042
204
206
AAA
BAA
ACA
CAA
CBA
D, E, …
A
B
C

Device functions Proline Prosonic Flow 93C PROFIBUS DP/PA 2 Function matrix
Endress+Hauser 7
2.1.5 Codes identifying cells
Each cell (block, group, function group and function) in the function matrix has an individual,
unique code.
Blocks:
The code is a letter (A, B, C, etc.)
Groups:
The code consists of three letters (AAA, ABA, BAA, etc.).
The first letter matches the block code (i.e. each group in block A has a code starting with an A_ _;
the codes of the groups in block B start with a B _ _, and so on). The other two letters are for
identifying the group within the respective block.
Function groups:
The code consists of three digits (000, 001, 100, etc.)
Functions:
The code consists of four digits (0000, 0001, 0201, etc.).
The first three digits are the same as the code for the function group.
The last digit in the code is a counter for the functions in the function group, incrementing from
0 to 9 (e.g. function 0005 is the sixth function in group 000).
2.2 Illustration of the function descriptions
A0004822-en
Fig. 1: Example for the description of a function
1 Name of the function
2 Number of the function (appears on the local display)
3 Description of the function
4 Selection or entry options or display
5 Factory setting (the measuring device is delivered with this setting/selected option)
Block Group Function group Functions
200020012002200
CAAC
A0001251
UNIT LENGTH 0424 For selecting the unit for displaying the length of the nominal diameter.
The unit you select here is also valid for:
- Nominal diameter of sensor, see Function NOMINAL DIAMETER (6804).
Options:
Factory setting:
MILLIMETER
INCH
MILLIMETER
1 2
3
54

2 Function matrix Device functions Proline Prosonic Flow 93C PROFIBUS DP/PA
8Endress+Hauser
2.3 Max. number of writes
The number of writes to the EEPROM is technically restricted to a maximum of 1 million. Attention
must be paid to this limit since, if exceeded, it results in data loss and measuring device failure. For
this reason, avoid constantly writing nonvolatile device parameters via the PROFIBUS!
2.4 Display lines on the local display
The local display is split into various display lines.
A0001253
Fig. 2: Local display
1 Main line
2 Additional line
3 Information line
The values are assigned to the individual lines in the USER INTERFACE block → Page 20.
2.5 Available Blocks, Groups, etc.
Available In-/Outputs Available Blocks, Groups, etc.
Type code of the
measuring device
PROFIBUS PA PROFIBUS DP Current output Pulse/freq. output Relay output 1 Relay output 2 Status input MEASURED VARIABLES QUICK SETUP USER INTERFACE
OUTPUTS
INPUTS BASIC FUNCTION SUPERVISION Current output Pulse/freq. output Relay output 1 Relay output 2
93***-***********H X–––––– XXX–––––XX
93***-***********J –X––––– XXX–––––XX
93***-***********P –XXX––X XXXXX––XXX
93***-***********V – X – – X X X X X X – – X X X X X
Esc E
+
-
1
2
3

Device functions Proline Prosonic Flow 93C PROFIBUS DP/PA 2 Function matrix
Endress+Hauser 9
2.6 Function matrix Prosonic Flow 93C PROFIBUS
BLOCKS GROUPS FUNCTION
GROUPS
MEASURED VARIABLES A→MEASURING VALUES AAA →Page 11
(s. Page 10) SYSTEM UNITS ACA →Page 13
↓
QUICK-SETUP B→Commissioning and application setups →Page 17
(s. Page 17)
↓
USER INTERFACE C→CONTROL CAA →Page 21
(s. Page 20) MAIN LINE CCA →Page 25
ADDITION LINE CEA →Page 28
↓INFORMATION LINE CGA →Page 32
OUTPUTS E→CURRENT OUTPUT (1 to 3) EAA,B,C →Page 37
(see P. 36) PULSE/FREQUENCY OUTPUT (1 to
2) ECA,B →Page 48
↓RELAY OUTPUT (1 to 2) EGA, EGB,B →Page 73
INPUTS F→STATUS INPUT FAA →Page 84
(see P. 83)
↓
BASIC FUNCTION G→PROFIBUS-DP or PROFIBUS-PA GBA/GCA →Page 88
(s. Page 87) PROC. PARAM. (CH1 to CH2) GIA, -B →Page 95
SYS. PARAM. (CH1 to CH2) GLA, GLB →Page 101
↓SENSOR DATA (CH1 to CH2) GNA, GNB →Page 103
SUPERVISION J→SYSTEM JAA →Page 110
(s. Page 109) SYSTEM CH2 JAB →Page 110
VERSION INFO JCA →Page 113

3 Block MEASURED VARIABLES Device functions Proline Prosonic Flow 93C PROFIBUS DP/PA
10 Endress+Hauser
3BlockMEASUREDVARIABLES
Functions
FORMAT
DATE/TIME
(0429) P. 16
UNIT
VELOCITY
(0425) P. 15
FLOW VELOC
AVG.
(0087) P. 12
UNIT
LENGTH
(0424) P. 15
SOUND VELOC.
AVG
(0086) P. 12
UNIT
VOLUME
(0403) P. 14
UNIT VISCOSITY
(0423) P. 15
→ → →
SIGNAL
STRENGTH CH1
(0007) P. 11
SIGNAL
STRENGTH CH2
(0067) P. 11
VOLUME FLOW
AVG.
(0083) P. 12
UNIT VOLUME
FLOW
(0402) P. 13
UNIT
TEMPERATURE
(0422)P. 15
↑↑↑ ↑↑
Function
groups
MAIN VALUES
CH2
(000) P. 11
↑↓
MAIN VALUES
CH2
(006) P. 11
↑↓
CALC. MAIN
VALUES
(008) P. 12
CONFIGURATION
(040) P. 13
↑↓
ADDITIONAL
CONFIGURATION
(042) P. 15
↑↑
Groups
MEASURING
VALUES
(AAA) P. 11
↑↓ ↑↓
SYSTEM UNITS
(ACA) P. 13
↑
Block
MEASURED
VARIABLES
(A)

Device functions Proline Prosonic Flow 93C PROFIBUS DP/PA 3 Block MEASURED VARIABLES
Endress+Hauser 11
3.1 Group MEASURING VALUES
3.1.1 Function group MAIN VALUES CH1
3.1.2 Function group MAIN VALUES CH2
MEASURED VARIABL. A→MEASURING VALUES AAA →MAIN VALUES CH1 000
Functional description
MEASURED VARIABLES → MEASURING VALUES → MAIN VALUES CH1
SIGNAL STRENGTH CH1
(0007)
The signal strength appears on the display (channel 1).
Display:
4-digit fixed point number (e.g. 80.0)
!Note!
To ensure reliable measurement takes place, Prosonic Flow requires a signal strength
of > 30.
MEASURED VARIABL. A→MEASURING VALUES AAA →MAIN VALUES CH2 006
Functional description
MEASURED VARIABLES → MEASURING VALUES → MAIN VALUES CH2
SIGNAL STRENGTH CH2
(0067)
The signal strength appears on the display (channel 2).
Display:
4-digit fixed-point number
(e.g. 80.0)
!Note!
To ensure reliable measurement takes place, Prosonic Flow requires a signal strength
of > 30.

3 Block MEASURED VARIABLES Device functions Proline Prosonic Flow 93C PROFIBUS DP/PA
12 Endress+Hauser
3.1.3 Function group CALCULATED MAIN VALUES
MEASURED VARIABL. A→MEASURING VALUES AAA →CALC. MAIN VALUES 008
Functional description
MEASURED VARIABLES → MEASURING VALUES → CALC. MAIN VALUES
The calculated measured values appear on the display. The measured values of both channels are used when calculating
the values.
!Note!
• The units of measure of all the measured variables shown here can be set in the "SYSTEM UNITS" group.
• If the fluid in the pipe flows backwards, a negative sign prefixes the flow reading on the display.
VOLUME FLOW AVG
(0083)
The average volume flow appears on the display. Calculated from the measured values:
(VOLUME FLOW CH1 + VOLUME FLOW CH2) · 1/2
Display:
5-digit floating-point number, including unit and sign
(e.g. 5.5445 dm3/min; 1.4359 m3/h; –731.63 gal/d; etc.)
SOUND VELOCITY
AVERAGE
(0086)
The average sound velocity appears on the display. Calculated from the measured values:
(SOUND VELOCITY CH1 + SOUND VELOCITY CH2) · 1/2
Display:
5-digit fixed-point number, incl. units
(e.g. 1400.0 m/s, 5249.3 ft/s)
FLOW
VELOCITY AVERAGE
(0087)
The average flow velocity appears on the display. Calculated from the measured values:
(FLOW VEL. CH1 + FLOW VEL. CH2) · 1/2
Display:
5-digit floating-point number, including unit and sign
(e.g. 8.0000 m/s, 26.247 ft/s)

Device functions Proline Prosonic Flow 93C PROFIBUS DP/PA 3 Block MEASURED VARIABLES
Endress+Hauser 13
3.2 Group SYSTEM UNITS
3.2.1 Function group CONFIGURATION
MEASURED VARIABL. A→MEASURING VALUES AAA
↓
SYSTEM UNITS ACA →CONFIGURATION 040
Functional description
MEASURED VARIABLES → SYSTEM UNITS → CONFIGURATION
You can select the units for measured variables in this function group.
UNIT VOLUME FLOW
(0402)
Use this function to select the unit for displaying the volume flow.
The unit you select here is also valid for:
• PROFIBUS DP/PA output
• Low flow cut off
Options:
!Note!
The following units of time (…) can be selected:
s = second, m = minute, h = hour, d = day
Metric:
Cubic centimeter → cm³/…
Cubic decimeter → dm³/…
Cubic meter → m³/…
Milliliter → ml/…
Liter → l/…
Hectoliter → hl/…
Megaliter → Ml/… MEGA
US:
Cubic centimeter → cc/…
Acre foot → af/…
Cubic foot → ft³/…
Fluid ounce → oz f/…
Gallon → US gal/…
Million gallon → US Mgal/…
Barrel (normal fluids: 31.5 gal/bbl) → US bbl/… NORM.
Barrel (beer: 31.0 gal/bbl) → US bbl/… BEER
Barrel (petrochemicals: 42.0 gal/bbl) → US bbl/… PETR.
Barrel (filling tanks: 55.0 gal/bbl) → US bbl/… TANK
Imperial:
Gallon → imp. gal/…
Mega gallon → imp. Mgal/…
Barrel (beer: 36.0 gal/bbl) → imp. bbl/… BEER
Barrel (petrochemicals: 34.97 gal/bbl) → imp. bbl/… PETR.
Factory setting:
l/s

3 Block MEASURED VARIABLES Device functions Proline Prosonic Flow 93C PROFIBUS DP/PA
14 Endress+Hauser
UNIT VOLUME
(0403)
Use this function to select the unit for displaying the volume.
Options:
Metric:
Cubic centimeter → cm³
Cubic decimeter → dm³
Cubic meter → m³
Milliliter → ml
Liter → l
Hectoliter → hl
Megaliter → Ml MEGA
US:
Cubic centimeter → cc
Acre foot → af
Cubic foot → ft³
Fluid ounce → oz f
Gallon → US gal
Million gallon → US Mgal
Barrel (normal fluids: 31.5 gal/bbl) → US bbl NORM.FL.
Barrel (beer: 31.0 gal/bbl) → US bbl BEER
Barrel (petrochemicals: 42.0 gal/bbl) → US bbl PETROCH.
Barrel (filling tanks: 55.0 gal/bbl) → US bbl TANK
Imperial:
Gallon → imp. gal
Mega gallon → imp. Mgal
Barrel (beer: 36.0 gal/bbl) → imp. bbl BEER
Barrel (petrochemicals: 34.97 gal/bbl) → imp. bbl PETROCH.
Factory setting:
l (liter)
!Note!
• The unit of the totalizers is independent of your choice here. The unit for each
totalizer is selected separately for the totalizer in question.
• The unit selected in this function is only for showing the values on the local display,
i.e. the measuring system does not use it for further processing of the measured
variables.
Functional description
MEASURED VARIABLES → SYSTEM UNITS → CONFIGURATION

Device functions Proline Prosonic Flow 93C PROFIBUS DP/PA 3 Block MEASURED VARIABLES
Endress+Hauser 15
3.2.2 Function group ADDITIONAL CONFIGURATION
MEASURED VARIABL. A→MEASURING VALUES AAA
↓
SYSTEM UNITS ACA →CONFIGURATION 040
↓
ADD. CONFIGURATION 042
Functional description
MEASURED VARIABLES → SYSTEM UNITS → ADDITIONAL CONFIGURATION
UNIT TEMPERATURE
(0422)
Use this function to select the unit for displaying the fluid temperature.
!Note!
The fluid temperature is entered in the TEMPERATURE function → Page 98.
Options:
°C (Celsius)
K (Kelvin)
°F (Fahrenheit)
R (Rankine)
Factory setting:
°C
UNIT VISCOSITY
(0423)
Use this function to select the unit for fluid viscosity.
Options:
mm2/s
cSt
St
Factory setting:
mm2/s
UNIT LENGTH (0424) Use this function to select the unit for the measure of length.
The unit you select here is valid for:
• Nominal diameter
•Diameter
• Wall thickness
Options:
MILLIMETER
INCH
Factory setting:
MILLIMETER
UNIT VELOCITY (0425) Use this function to select the unit for displaying the velocity.
The unit you select here is also valid for:
•Soundvelocity
• Flow velocity
Options:
m/s
ft/s
Factory setting:
m/s

3 Block MEASURED VARIABLES Device functions Proline Prosonic Flow 93C PROFIBUS DP/PA
16 Endress+Hauser
FORMAT DATE/TIME
(0429)
Use this function to select the date and time format of the calibration history.
Options:
DD.MM.YY 24 H
MM/DD/YY 12 H A/P
DD.MM.YY 12 H A/P
MM/DD/YY 24 H
Factory setting:
DD.MM.YY 24 H
Functional description
MEASURED VARIABLES → SYSTEM UNITS → ADDITIONAL CONFIGURATION

Device functions Proline Prosonic Flow 93C PROFIBUS DP/PA 4 Block QUICK-SETUP
Endress+Hauser 17
4 Block QUICK-SETUP
Block Group Function
groups Functions
QUICK-SETUP
(B)
→→QS-
COMMISSION.
(1002) P. 17
→T-DAT
SAVE/LOAD
(1009) P. 17
Functional description
QUICK-SETUP
SETUP
COMMISSIONING
(1002)
Use this function to start the Quick Setup menu for commissioning.
Options:
YES
NO
Factory setting:
NO
!Note!
You will find a flowchart of the "COMMISSIONING" Quick Setup menu on Page 18.
Please refer to the Operating Instructions for Prosonic Flow 93C PROFIBUS DP/PA,
BA 089D, for more information on Quick Setup menus.
T-DAT SAVE/LOAD
(1009)
Use this function to save the parameter settings / configuration of the transmitter in a
transmitter DAT (T-DAT), or to load the parameter settings from the T-DAT into the
EEPROM (manual security function).
Application examples:
• After commissioning, the current measuring point parameters can be saved to the
T-DAT as a backup.
• If the transmitter is replaced for some reason, the data from the T-DAT can be loaded
into the new transmitter (EEPROM).
Options:
CANCEL
SAVE (from EEPROM to T-DAT)
LOAD (from the T-DAT into EEPROM)
Factory setting:
CANCEL
!Note!
• If the power supply fails, the totalizer readings are automatically saved to the
EEPROM.
• The option "LOAD" cannot be executed if the T-DAT is empty or faulty.
• The option "LOAD" and "SAVE" cannot be executed if no T-DAT is present.

4 Block QUICK-SETUP Device functions Proline Prosonic Flow 93C PROFIBUS DP/PA
18 Endress+Hauser
4.1 Quick Setup "Commissioning"
In the case of measuring devices without a local display, the individual parameters and functions
must be configured via the operating program, e.g. FieldCare.
If the measuring device is equipped with a local display, all the important device parameters for
standard operation, as well as additional functions, can be configured quickly and easily by means
of the following Quick Setup menus.
A0009881-en
+
+
E+
E
m
n
o
p
Esc
E
+
-
XXX.XXX.XX
Commission
Language
System Units
Presetting
Quick Setup
HOME-POSITION
QS
1002
2000
Volume flow Temperature Viscosity Length Velocity Quit
Configure another unit? NOYES
Unit Unit Unit Unit Unit
Unit
Volume Flow Temperature Viscosity Length Velocity
Totalizer
Selection
System units
0402 0422 0423 0424 0425
3001
B
Frequency Pulse
Current Output Freq.-/ Pulse Output Quit
Assign
Current
Current
Span
Value
0_4 mA
Value
20 mA
Measuring
Mode
Time
Constant
Failsafe
Mode
Failsafe
Mode
Failsafe
Mode
4000
4001
4002
4003
4004
4005
4006
Operation
Mode
4200
Selection
Output type
Assign
Frequency
End
Value Freq.
Value
f min
Value
f max
Measuring
Mode
Output
Signal
Time
Constant
4201
4203
4204
4205
4206
4207
4208
4209
Pulse
Value
Pulse
Width
Measuring
Mode
Output
Signal
4221
4222
4223
4225
4226
4227
Assign
Pulse
Configure another Output?
Autom. Configuration of the display? NO
NO
YES
Pulsating Flow
Carrying out the Quick Setup
Pulsating Flow
Automatical configuration
of the display
Another Quick Setup?
NOYES
Current configuration
of the display persists

Device functions Proline Prosonic Flow 93C PROFIBUS DP/PA 4 Block QUICK-SETUP
Endress+Hauser 19
!Note!
• The display returns to the function SETUP COMMISSIONING (1002) if you press the ESC key
combination during parameter interrogation.
• If you answer YES to the question regarding the "Automatic configuration of the display", the
display lines are assigned as follows:
Main line = volume flow
Additional line = totalizer 1
Information line = operating/system condition
mOnly units not yet configured in the current Quick Setup are offered for selection in each cycle. The volume unit is
derived from the volume flow unit.
nThe "YES" option remains visible until all the units have been configured.
"NO" is the only option displayed when no further units are available.
oOnly outputs not yet configured in the current Quick Setup are offered for selection in each cycle.
pThe "YES" option appears as long as a free output is still available.
"NO" is the only option displayed when no further outputs are available.

5 Block USER INTERFACE Device functions Proline Prosonic Flow 93C PROFIBUS DP/PA
20 Endress+Hauser
5BlockUSERINTERFACE
Functions
XLINE CALC. M.
VAL.
(2009) P. 22
BACKLIGHT
(2004) P. 22
ACCESS CODE
COUNTER
(2023) P. 22
DISPLAY MODE
(2403) P. 29
DISPLAY MODE
(2423) P. 31
DISPLAY MODE
(2603) P. 33
DISPLAY MODE
(2623) P. 35
CONTRAST
LCD
(2003) P. 22
STATUS
ACCESS
(2022) P. 23
FORMAT
(2202) P. 26
FORMAT
(2222) P. 27
FORMAT
(2402) P. 29
FORMAT
(2422) P. 31
FORMAT
(2602) P. 33
FORMAT
(2622) P. 35
DISPLAY
DAMPING
(2002) P. 22
DEF. PRIVATE
CODE
(2021) P. 23
100% VALUE
(2201) P. 25
100% VALUE
(2221) P. 27
100% VALUE
(2401) P. 28
100% VALUE
(2421) P. 30
100% VALUE
(2601) P. 33
100% VALUE
(2621) P. 34
→ → → → → → → →
LANGUAGE
(2000) P. 21
ACCESS CODE
(2020) P. 23
TEST
DISPLAY
(2040) P. 24
ASSIGN
(2200) P. 25
ASSIGN
(2220) P. 27
ASSIGN
(2400) P. 28
ASSIGN
(2420) P. 30
ASSIGN
(2600) P. 32
ASSIGN
(2620) P. 34
↑↑↑ ↑↑ ↑↑ ↑↑
Function
groups
BASIC
CONFIGURATION
(200) P. 21
↑↓
UN-/LOCKING
(202) P. 23
↑↓
OPERATION
(204) P. 24
CONFIGURATION
(220) P. 25
↑↓
MULTIPLEX
(222) P. 27
CONFIGURATION
(240) P. 28
↑↓
MULTIPLEX
(242) P. 30
CONFIGURATION
(260) P. 32
↑↓
MULTIPLEX
(262) P. 34
↑ ↑↑↑
Groups
CONTROL
(CAA) P. 21
↑↓ ↑↓
MAIN LINE
(CCA) P. 25
↑↓ ↑↓
ADDITION LINE
(CEA) P. 28
↑↓ ↑↓
INFORMATION
LINE
(CGA) P. 32
↑
Block
USER INTERFACE
(C)