EnerCharge ECC 320 Single Installation manual

DC-Charger with integrated
AC/DC converters and direct payment
ECC 320 Single/Dual
Transport, Installation, Start-Up
4/2023
Rev. 08

2Manual: Transport, Installation and Start-Up: DC CompactCharger ECC 320 ©EnerCharge GmbH
© Copyright by EnerCharge GmbH,
Subject to change.
This document is protected by copyright. It sup-
ports the user in the safe and ecient use of the
device.
Any unauthorized reproduction and / or distribution of this
manual is strictly prohibited both in whole and in part. In
the event of a violation, EnerCharge is forced to take legal
action.
Please retain this manual for future use.
About this Document
EnerCharge GmbH
Kötschach 66 |9640 Kötschach-Mauthen |Austria |
|www.enercharge.at |www.e-charging.at

3
Manual: Transport, Installation and Start-Up: DC CompactCharger ECC 320 ©EnerCharge GmbH
Inhaltsverzeichnis
1. General 4
1.1 Structure of this Manual 4
1.2 Safety Notices 5
1.3 Notes on Text Design 5
1.4 Contact Information 5
2. General Information 6
2.1 List of Abbreviations 6
3. Safety Notices 7
3.1 Important Safety Notices 7
3.2 Qualification of Staff 7
4. Preparation for Installation 8
5. Installation 10
5.1 Site Selection 10
5.2 Minimum Spacing 11
5.3 Foundation Dimensions 12
5.4 Foundation Strength Testing 13
5.5 Check the Scope of Delivery 14
5.6 Transport Regulations 15
5.7 Lifting and Lowering the ECC 320 16
5.8 Opening and Closing the ECC 320 18
5.9 Installation on the Foundation 19
6. Wiring Diagrams ECC 320 20
6.1 Connection of KEBA Wallbox 21
7. Electrical Installation ECC 320 22
7.1 De-Energizing the Supply Line 22
7.2 Specifications for the Electrical Installation 22
7.3 Connection of Mail Supply Line 400 V 23
7.4 Cable Cross-Sections AC Supply Line 23
7.5 Disconnect the ECC 320 from the Power Supply 26
7.6 Cable Entry 27
7.7 Electrical Connection of ECC 320 28
7.8 Optional: Connecting a Wallbox via Ethernet 31
7.9 Optional: Konfiguration KEBA 32
7.10 Make the Network Settings 34
7.11 Activate the Line Fault Current Circuit Breaker 36
7.12 Attach the Base Panels 36
7.13 Close and Lock the Service Door 36
7.14 Install AD/DC Module Upgrade 36
8. Initialization 37
8.1 Charging Connectors 37
8.2 Charge Plug CCS 38
8.3 Charge Plug CHAdeMO 38
8.4 Payment System (Direct Payment) 38
8.5 Load Management 39
8.6 Measures after Performed Installation 44
9. Attachments 46
9.1 Dimensions ECC 320 46
9.2 Technical Data 47
9.3 Dimension Drawing of Prefab Foundation 48
9.4 Installation of Manual Switch Disconnector 49
9.5 Installation of Motorized Switch Disconnector 49
9.6 National Usage Restrictions 50
9.7 Copyright 50
9.8 Customer Service 50
9.9 Legal Notice 50

4Manual: Transport, Installation and Start-Up: DC CompactCharger ECC 320 ©EnerCharge GmbH
GENERAL
1. General
This document contains all important information on the transport, installation and initialization of
the ECC 320 charging station. It is an original component of the complete product provided by the
manufacturer and is intended to provide assistance.
This manual serves as an aid for trouble-free and
safe installation. For information on the operation,
maintenance & care of the ECC 320 charging station,
(referred to as ECC 320 in the following) please refer
to the operating manual.
Read the manual carefully before you start the
installation.
This manual will help you:
>avert user hazards
>to install the device in the optimal way
>to detect defects
>to avoid malfunctions
>to increase reliability and service life
Keep this manual on transport, assembly and commissi-
oning for later use and pass on the documents if the ECC
320 is dismantled and, if necessary, reinstalled by another
person.
Any procedure for installing the charging station that
deviates from this manual is not permitted and will re-
sult in the exclusion of warranty, guarantee and liability.
All notices that are important for the safety of the user
are marked with a corresponding symbol. This is im-
portant information which, if ignored, may have health
consequences for the user and cause damage to the
charging station, the e-vehicle or the building.
1.1 Structure of this Manual
>General:
Contains all important information for the installation of the ECC 320.
>Safety Notices:
Contains important information on handling the ECC 320.
>Preparation for Installation:
Contains all information about transport, site selection and connection technology.
>Installation:
Contains information and safety instructions for mounting the ECC 320 on the
foundation and important information for creating the foundation.
>Electrical Installation:
Contains important information on electrical installation.
>Inbetriebnahme:
Contains important information for commissioning the ECC 320.
>Attachments:
Includes dimensions, technical data, customer service and the legal notice.

5
Manual: Transport, Installation and Start-Up: DC CompactCharger ECC 320 ©EnerCharge GmbH
GENERAL
The following safety symbols must be observed:
1.2 Safety Notices
1.3 Notes on Text Design
1.4 Contact Information
>Contact / Manufacturer:
EnerCharge GmbH I Kötschach 66 I 9649 Kötschach-Mauthen I Austria I
If technical faults cannot be rectied by the customer's own means,
EnerCharge specialists can be contacted:
Passages marked with this symbol contain important notices or particular information necessary
for successful operation. Actions marked with this symbol should be carried out as required.
This symbol in conjunction with the signal word "WARNING" signies a possibly dangerous situa-
tion. Disregarding this safety notice can lead to serious injury or death.
• This is a warning text with a known remedial action
This symbol in conjunction with the signal word "DANGER" signies an immediate danger. Disre-
garding this safety notice can lead to serious injury or death.
• This is a warning text with a known remedial action
DANGER
WARNING
CAUTION
ATTENTION
This symbol in conjunction with the signal word "CAUTION" signies a possibly dangerous situa-
tion. Disregarding this safety notice can lead to minor or slight injuries.
• This is a warning text with a known remedial action
Nature, Source
Nature, Source
Nature, Source
in the 1text body
„Quotation marks“
>List
Identifies or describes a specific component in the text body with numbered icons.
Numbered icons: Identify or describe a specific component.
Numbering: Identifies the action steps in the charging process.
Indicates text parts set off from the text body.
Indicates lists assigned to a specific section.
Indicates information for special attention.
1
1 2 3
2 3
G INFORMATION
Other manuals for ECC 320 Single
1
Table of contents
Other EnerCharge Automobile Batteries Charger manuals