Energotech EnergoControl T60 Series User manual

EnergoControl
Touchscreen Thermostat - T60 Series
User Guide
version 2.86et
ENGLISH
ErP✔

2

Table of Contents
LCD Main Display ................................................
Overview .............................................................
Geng Started - General ....................................
Mode Selecon ...................................................
Startup Wizard - Wi-Fi .........................................
Mode 1 - Thermostat Mode
Home/Away Mode ..............................................
Opmum Start / Adapve Start ..........................
Air Humidity ........................................................
Hold Mode (Timer Funcon) ..............................
Holiday Mode .....................................................
Schedule .............................................................
Feature Sengs
Language .............................................................
Time Zone Selecon ............................................
Clock Seng .......................................................
Backlight Seng .................................................
Standby Screen ...................................................
Screen Lock .........................................................
Network Seng ..................................................
Pairing to App (Smart Cong) .............................
Temperature Format ...........................................
Temperature Limit ..............................................
Schedule .............................................................
Switch Di ...........................................................
Output Delay .......................................................
Away Mode .........................................................
Defrost ................................................................
Sensor Selecon and Calibraon ........................
Humidity Sensor - Calibraon .............................
Open Window Funcon ......................................
Floor Temperature Limit .....................................
Opmum Start / Adapve Start ..........................
Daylight Saving Time (DST) .................................
Work Mode Selecon .........................................
System Informaon .............................................
Reset To Factory Sengs ....................................
Mode 2 - Time Clock
Seng the Time Clock ........................................
Boost Mode ........................................................
Technical Specicaon ........................................
4
5
6
6
7
8
8
8
8
9
9
11
11
11
12
12
12
13
13
14
14
14
14
15
15
15
16
17
17
17
18
18
18
19
19
20
20
23
3

LCD Main Display
4

Wi-Fi indicator - Displayed when connected to a Wi-Fi network (T60-EW/SW only).
Hold: Temperature Hold / Timer Funcon.
Adjusng the oponal sengs.
Day Indicator and Clock.
Home/Away: Allows a preset set-back temperature while away from the premises.
OPT (Opmum): Displayed ON/OFF of the “Adapve/Opmum Start”.
Air Humidity:
- If humidity value less than 30%, the pointer will be in the Red area
- If humidity value is between 30% and 60%, the pointer will be in the Green area
- If humidity value is more than 60%, the pointer will be in the Grey area
Power - ON/OFF.
Holiday: Displayed when thermostat is in holiday mode.
Schedule: Programmable operaon.
Menu buon / Feature sengs.
Decrease the Seng Temperature / Previous Page in Feature Sengs.
Increase the Seng Temperature / Next Page in Feature Sengs.
Seng temperature display.
Room temperature display.
°C or °F display.
Displayed “heang ame” when heat is required.
Overview
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
5

Geng Started - General
When the thermostat has been installed and powered on for the rst me, you must set
the Language, Time Zone, Date/Time and the Daylight Saving Time.
Whenever the use of the icons is menoned in this user guide, you can also
swipe navigate on the main display.
Set the language to be used on the thermostat display, see page 11.
Set the me zone in which the thermostat is located, see page 11.
Set the current date and me, see page 11.
Set the region you are in, to ensure correct use of daylight saving me, see page 18.
The T60 is now ready for basic use in thermostat mode and will control your heang
system according to the set temperature. If you want to program a heang schedule,
instrucons are given in the secon tled Schedule on page 9.
The T60 series is versale with several funcons, opons and sengs. Read this
user guide and learn more.
01
02
03
04
05
6
Mode Selecon
The T60 can either be used as a Thermostat (default) or a Time-clock.
Thermostat Mode – The thermostat can be fully programmed with predetermined
mes/periods and individual temperatures. The T60 provides three basic schedules with
dierent program opons.
Time-Clock Mode – The thermostat allows only a me-clock seng to switch the heat-
ing ON or OFF. This mode ignores any set temperature.
To change between the two modes, see page 18.

Download and install the free T60 App MyComfort House
on your smart device, via App Store or Google Play Store.
Open the app and register an account. The account is necessary in order to set up
the thermostat for connecon to a wireless network, through which the thermostat
is able to connect to our thermostat cloud server. Server connecvity enables control
of the thermostat remotely using the app. The account also holds the sengs if a new or if
mulple devices are used.
On the thermostat: set up a Wi-Fi connecon, see and the follow the steps on page 13.
When you have successfully set up a Wi-Fi connecon on your thermostat, you can pair and
connect it to the MyComfort House app in the following way:
On the app: log in to your account.
Press the icon Add.
Press ‘Locaon Name’ to add the property, for example Home or Oce etc.
Press the icon to conrm the locaon/property name and then press ‘Next’.
Add Device: the opons are Scan QR Code, Smart Cong and Manual Entry. Tap and select
‘Smart Cong’ and then tap on ‘Add device locaon’.
Wi-Fi conguraon: Enter the password to the earlier selected network name (SSID) for your
wireless network and tap on ‘Next’. The app will now start a search for the thermostat.
On the thermostat: press the icon and enter Feature Sengs. Find then the “Pairing to
App (Smart Cong)” opon, press it and an automac scanning will start. Wait for the devices
to pair. The communicaon may take a few minutes.
When the matching is done and successful, the thermostat will return to “Feature Sengs”.
Press the icon to return to the main display.
On the App / Add Device: select device type ‘Heang Thermostat’ and then tap on ‘Add
device locaon’.
On the App / Add device locaon: select a seng locaon, room name, by choosing from the
pre ready list or enter it manually.
Press ‘Next’ and the setup is done. The thermostat is now and ready to operate!
Startup Wizard - Wi-Fi
This page applies only if you have purchased the
Wi-Fi version, T60-EW or SW, of the thermostat
Use only the 2.4GHz band, if you have a selectable dual-band router.
01
02
03
04
05
06
07
08
09
10
11
12
13
14
7

Home/Away Mode
The Home/Away Mode is a shortcut buon to easily change to a preset temperature
when leaving the premises. The range is +7°C to +35°C, default is +7°C.
In Away Mode, the thermostat will only turn the heang ON, if/when the room tem-
perature drops below the set Away temperature. This is congured in Feature
Sengs. If the heang is turned on, the ame symbol will be displayed.
01
02
MODE 1 - THERMOSTAT MODE / Operaon of Main Display
Air Humidity
Shows the indoor air humidity. When tapping on the icon, the display will simulta-
neously show the temperature and humidity. The rate can be calibrated in Feature
Sengs, secon Humidity Sensor.
01
02
Hold Mode (Timer Funcon)
The Temperature Hold funcon allows you to manually override the current operang
program and set a dierent temperature for a desired period.
Opmum Start / Adapve Start
The thermostat features an opmum/adapve funcon that automacally changes
heang start mes, to ensure that the required set point temperature has been reached
during a programmed period.
The thermostat collects data and calculates how much earlier the heang system must
be turned on/o, to achieve the required set point temperature. The xed rate of change
is 15 minutes, the number of minutes for 1°C temperature rise.
Select/tap “OFF” in the OPT Opmum box, if you simply want the heang to start
at the beginning of a set point, default funcon.
Select/tap “ON” in the OPT Opmum box, if you want the heang to run with
opmum/adapve funcon.
8

Press the buon “Hold”.
Press the rst column of “Hold Temp”, use the icons to set the desired hold
temperature. The temperature range is +5°C to +45°C.
Press the second/third columns of Hours/Minutes, use the icons to set the
desired hold me.
Press the icon to save and return to main display, or press the “Cancel ”to delete
the seng.
The indicaon “Hold **°C, Le **:**” is displayed on top of the screen. The me
will count down the duraon and then revert to the normal program.
Holiday Mode
The T60 will maintain the set temperature for the duraon of the holiday and will then
automacally return to the program mode on your return.
Press the buon “Holiday” and switch the mode to
For Holiday Start, press the column of Year / Month / Day. Use the icons to set
the Year / Month / Day values under Holiday Start.
For Holiday End, press the column of Year / Month / Day. Use the icons to set
the Year / Month / Day values under Holiday End.
Press the icon to save and return to main display.
The indicaon “Holiday unl **/** **:**” is displayed on top of the screen.
Schedule
Press the buon “Schedule” and select one of the four dierent opons:
Weekday/Weekend, 7 Days, 24 Hours or None.
For example: seng an opon to a 7 Days mode.
Press the icon in the front of 7 Days, and it will turn to
Press the icon to save and return to main display.
01
02
03
04
01
02
03
04
01
02
03
9

Press the “Schedule” again on the main display and enter the seng interface. On
the edit page, Monday to Sunday can now be selected.
Press “Monday” and select a me period: Morning / Day / Evening / Night. Each
me period has opons, On/O.
In the program of Monday:
Morning
Press the rst column of ‘Time’, use the icons to set desired “Hour”.
Press the second column of ‘Time’, use the icons to set desired “Minute”.
Press the third column of ‘Temperature’, use the icons to set desired room
temperature.
For example: The seng me is 08 (Hour): 00 (Minute)
For example: The seng temperature is 21°C
Day
The same as Program Morning procedures.
For example: The seng me is 09 (Hour): 30 (Minute)
For example: The seng temperature is 16°C
Evening
The same as Program Morning procedures.
For example: The seng me is 16 (Hour): 30 (Minute)
For example: The seng temperature is 22°C
Night
The same as Program Morning procedures.
For example: The seng me is 23 (Hour): 00 (Minute)
For example: The seng temperature is 17°C
Four Time Periods - Four Temperatures
08:00-09:29 - During this me period the temperature will remain at 21°C
09:30-16:29 - During this me period the temperature will remain at 16°C
16:30-22:59 - During this me period the temperature will remain at 22°C
23:00-07:59 - During this me period the temperature will remain at 17°C
04
05
01
02
03
04
01
02
10
If you want to change to another Schedule opon:
Press the icon Feature Sengs.
Browse to the “Schedule” submenu and press
Make your new choice of one of the four opons: Weekday/Weekend, 7 Days, 24
Hours or None.

Feature Sengs
Language
01
02
03
04
Time Zone Selecon
Press the icon Feature Sengs.
Browse to the “Time Zone Selecon” submenu and press
Select the me zone you desire. UTC -12 to +12 hour.
Press the icon twice to save and return to main display.
01
02
03
04
Clock Seng
To set the Date and Time, follow these steps:
Press the icon Feature Sengs.
Browse to the “Clock Seng” submenu and press
For Date, press the columns of Year / Month / Day, use the icons for the de-
sired seng
For Time, press the columns of Hour / Minute, use the icons for the desired
seng.
Press the icon twice to save and return to main display.
01
02
03
04
05
11
Press the icon Feature Sengs.
Browse to the “Language” submenu and press
Select your desired language.
Press the icon twice to save and return to main display.

Press the icon Feature Sengs.
Browse to the “Backlight” submenu and press
Use the icons to adjust to the desired brightness.
Ambient Light Dimming: When this funcon is enabled, the light sensor will detect
when to dim the back-light if the ambient light levels drop. If you turn the room
lights o, the back-light will dim so the T60 does not light up the room.
Ambient Light Dimming is in Mode:
Automac adjustment of the backlight brightness.
Ambient Light Dimming is in Mode:
Manual adjustment of the backlight brightness.
Press the icon twice to save and return to main display.
Backlight Seng
Standby Screen
Screen Lock
Press the icon Feature Sengs.
Browse to the “Standby Screen” submenu and press
There are four choices, 3 Min / 10 Min / Just Night / Never, to control the standby
screen me. For example, seng the standby me for 10 minutes: press the icon
in the front of “10 Min” and it will turn to
The screen can also go black aer standby by changing mode to mode
Press the icon twice to save and return to main display.
Press the icon Feature Sengs.
Browse to the “Screen Lock” submenu and press
01
02
03
04
05
06
01
02
03
04
05
01
02
12

01
02
03
Master Key
8657
Opon Inacve PIN code
Opon Acve PIN code
For example, set your personal pin code to 5209
Press the rst column, use the icons to set to 5
Press the second column, use the icons to set to 2
Press the third column, use the icons to set to 0
Press the fourth column, use the icons to set to 9
Press the icon twice to save and return to main display.
The seng will be eecve aer the thermostat has been in stand-by mode.
To unlock the thermostat, enter your four digit PIN code.
And if you forget your PIN code...
03
04
Network Seng Applies only for T60-EW/SW
Press the icon Feature Sengs.
Browse to the “Network Seng” submenu and press
Find your network and mark it.
Press the icon twice to save and return to main display.
Pairing to App (Smart Cong) Applies only for T60-EW/SW
01
02
03
04
13
Press the icon Feature Sengs.
Browse to the “Pairing to App” submenu and press for automac scanning.
Wait for the devices to pair. The communicaon may take a few minutes. When the
pairing is done and successful, the thermostat will return to the Feature Sengs.
Press the icon to return to the main display.

Press the icon Feature Sengs.
Browse to the “Temp Format” submenu and press
There are two opons °C / °F. Celsius / Fahrenheit.
Press the icon in the front of °C or °F and it will turn to
Press the icon twice to save and return to main display.
Temperature Format
01
02
03
04
05
Temperature Limit
Press the icon Feature Sengs.
Browse to the “Temp Limit” submenu and press
Press the rst column, use the icons to adjust min. temp. between 5-44°C.
Press the second column, use the icons to adjust max. temp. between 6-45°C.
Press the icon twice to save and return to main display.
01
02
03
04
05
Schedule
Press the icon Feature Sengs.
Browse to the “Schedule” submenu and press
There are four opons: Weekday/Weekend, 7 Days, 24 Hours or None.
Press the icon in the front of the desired opon, and it will turn to
Press the icon twice to save and return to main display.
01
02
03
04
Switch Di
This funcon allows you to adjust the switching dierenal of the thermostat. The
14

Defrost
The thermostat automacally enter the Defrost Mode when the room temperature
drops below the set defrost temperature. The range is 7-17°C. The default is +7°C and is
suitable for most applicaons.
system defaults to 0.5°C, meaning that when the temperature is set to 20°C, the
heang will start at 19.5°C and stop at 20°C. If the value is set to 1°C, the heang will
start at 19°C and stop at 20°C.
The switching dierenal is seable between 0.5°C - 3.0°C .
Output Delay
To prevent rapid switching, an output delay can be entered. This can be set from
0-15 minutes. The default is 0, meaning no delay. This funcon helps to prevent
system “short cycling”.
Away
There is a preset temperature while you are away from the house. The default is +7°C.
To change/set the temperature, follow these steps:
Press the icon Feature Sengs.
Browse to the “Away” submenu and press
Use the icons to adjust the temperature. The range is 7-35°C
Press the icon twice to save and return to main display.
01
02
03
04
Press the icon Feature Sengs.
Browse to the “Defrost” submenu and press
Temperature Opons.
Use the icons to adjust the temperature.
Press the icon twice to save and return to main display.
01
02
03
04
15

Press the icon Feature Sengs.
Browse to the “Sensor Selecon” submenu and press
Press the icon of which of the following sensors you want to calibrate:
Built in Sensor (Default)
Remote Air Sensor (external sensor)
Floor Sensor Only (external sensor)
Select the chosen value, you must then oset the thermostat to reect the tempera-
ture actually measured, air or oor, by pressing the icons
Press the icon twice to save and return to main display.
Sensor Selecon and Calibraon
Sensor Selecon. You can select which sensor should be used, there are ve opons:
• Built in Sensor (default)
• Remote Air Sensor (external sensor)
• Floor Sensor Only (external sensor)
• Built in & Floor Sensor
• Remote Air & Floor Sensor
Note: When you enable “Remote Air & Floor Sensor”, the oor sensor is used as a oor
liming sensor and is designed to prevent the oor from overheang.
Note: The Remote Air Sensor must not be used for controlling electric underoor heat-
ing. Only designated oor sensors or both (Remote Air & Floor Sensor) should be used.
If the oponal air- or oor sensor is not supplied by Energotech, an 10 kΩ sensor must be
used together with the thermostat.
Press the icon Feature Sengs.
Browse to the “Sensor Selecon” submenu and press
Press the icon of which sensor you require.
Press the icon twice to save and return to main display.
01
02
03
04
Temperature Calibraon of the Sensors. You can calibrate the sensors with ± 5°C in steps
of 0.5°C, in the following way:
01
02
03
04
05
16

Humidity Sensor - Calibraon
This opon allows you to calibrate the humidity sensor. You should only calibrate the
sensor if the reading diers from the actual air humidity.
You can calibrate the sensor with ± 30% in steps of 1% in the following way:
Press the icon Feature Sengs.
Browse to the “Humidity Sensor” submenu and press
Press the icons to adjust and set the measured room humidity.
Press the icon twice to save and return to main display.
01
02
03
04
Open Window Funcon
Funcon descripon: The thermostat turns the heat o for 15 minutes, if it detects that
the temperature drops by more than three degrees in less than one minute.
You can enable or disable the this funcon in the following way:
Press the icon Feature Sengs.
Browse to the “Open Window Funcon” submenu and press
Press the icon or to enable or disable the funcon.
Press the icon twice to save and return to main display.
01
02
03
04
Floor Temperature Limit
The funcon is available when the oor sensor is enabled. You can set a oor tempera-
ture limit between 20-45°C, the default is 28°C.
Press the icon Feature Sengs.
Browse to the “Floor Temp Limit” submenu and press
Press the icons to set the temperature.
01
02
03
17

The funcon is selected in the main display.
Daylight Saving Time (DST)
Press the icon Feature Sengs.
Browse to the “Daylight Saving Time DST” submenu and press
Press the icon or to enable or disable the funcon.
There are three opons: European Union /US & Canada / Australia & New Zealand
Press the icon in the front of your choice and it will turn to
Press the icon twice to save and return to main display.
01
02
03
04
05
Press the icon twice to save and return to main display.
04
Opmum Start / Adapve Start
Work Mode Selecon
This is where you select if you want the thermostats to work in Heang Mode or
Timer Mode.
Note! Be sure you know how the dierent modes work. Descripon of the Timer
Mode (Mode 2 - Time Clock) on page 20 in the user guide.
To change between the two modes, follow these steps:
18
NTC
Press the icon Feature Sengs.
Browse to the “Work Mode Selecon” submenu and press
Select ‘Heang Mode’ or ‘Timer Mode’ by pressing on one of the dialog boxes.
The thermostat will now automacally restart and enter the desired mode.
01
02
03
04

Reset To Factory Sengs
Press the icon Feature Sengs.
Browse to the “Reset To Factory Sengs” submenu and press
Press ‘Reset’ for factory sengs.
The thermostat will now automacally restart.
Warning! When reset, all current sengs on the device will be lost.
01
02
03
04
System Informaon
Press the icon Feature Sengs.
Browse to the “System Informaon” submenu and press
The version number and ID number could come in handy in case of a warranty.
Press the icon to exit.
01
02
03
04
19

Seng the Time Clock
To program the me clock mes, follow these steps:
Press the buon “Schedule” on the main display.
Press on Weekday or Weekend
Four me periods, Morning / Day / Evening / Night, can be selected to set.
Each period has the opons ON/OFF.
Press the ‘Hour’ column of the ON me and use the icons to set to the desired
hours.
Press the ‘Minute’ column of the ON me and use the icons to set to the
desired minutes.
Press the ‘Hour’ column of the OFF me and use the icons to set to the desired
hours.
Press the ‘Minute’ column of the OFF me and use the icons to set to the
desired minutes.
Repeat above steps to set the selected me periods.
Press the icon twice to save and return to main display.
01
02
03
04
05
06
07
08
MODE 2 - TIME CLOCK
Boost Mode
The Boost funcon allows you to override all operaons of the thermostat.
In Boost mode, the heang is constantly acvated for a desired length of me. To acvate
this funcon, follow these steps:
Press the buon “Boost” on the main display.
Select your desired Boost Mode ON or OFF.
01
02
20