
6/8 energysistem.com
Left multifunction buttons (1 and 2) for 2 seconds. At this point, the LED status indicator (3) on the earbuds flashes and
both earbuds pair automatically. When the LED status indicator (3) on an earbud flashes blue and red, you will be able
to pair your earphones with a Bluetooth music player.
To switch off your Earphones Urban 1 True Wireless, put them back in the charging case. You can also do this by
pressing the Right and Left multifunction buttons (1 and 2) for 4 seconds.
The earbuds will charge automatically when you put them back in the charging case. If you do not want to charge them,
press the Charge on/off button (7).
Bluetooth pairing
Switch on your Earphones Urban 1 True Wireless and wait until the devide enters search mode. At this point, you can
pair the earbuds with a music player. Select Earphones Urban 1 True Wireless from the list of Bluetooth devices on your
smartphone or Bluetooth music player and press ?connect?. Both devices will be connected immediately and without
codes. You will hear a confirmation sound when both devices are paired. At this point, the LED status indicator (3) on
both earbuds flashes blue.
If you previously paired the earbuds with a device, there is no need to repeat the pairing process again. Just enable
Bluetooth on your music player and switch on your Earphones Urban 1 True Wireless. They will sync with it
automatically.
Note: To optimize battery life, your Earphones Urban 1 True Wireless turn off automatically after 5 minutes in search
mode, if not synchronized with any other device.
Playback control
Play/Pause
Press the Left or Right multifunction button (2) or (1) to pause or resume playback.
Volume +/Volume -
Press the Right or Left multifunction button (1) or (2) twice to turn up or down the volume.
Switching to the next or previous track
You can press and hold the Right or Left multifunction button (1) or (2) for 2 seconds to switch to the next or previous
track during music playback.
Call control
Once the Earphones Urban 1 True Wireless and your smartphone are synchronized, you can control calls from the
earphones.
Answering/Ending a call
To answer an incoming call or hang up press the Left or Right multifunction button (2) or (1) once.
Rejecting a call
Press and hold the Left or Right multifunction button (2) or (1) for approximately 2 seconds to reject an incoming call.
Using the voice assistant feature
You can interact with your smartphone voice assistant using your Earphones Urban 1 True Wireless. Press the Left
multifunction button (2) three times to activate the assistant. Give a voice command when you hear the confirmation
sound.
Charging the battery
Earphones
When the battery level of your Earphones Urban 1 True Wireless is below 10%, the LED status indicator (3) flashes red.
You will also hear a low battery warning sound. To charge the battery, put the earphones in the charging case. The LED
status indicator (3) lights up red and turns off once the charging process has been completed.
Charging case
When the battery level of the charging case is below 10%, the first LED of the Charging indicator (charging case) (6)